How to Clean a Carburetor on a Small Engine, Mower, ATV, Go Kart, Scooter

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ • 145

  • @nitot
    @nitot 8 років тому +56

    Beautifully done video, no BS just right to the important stuff!

    • @Random-hg5wp
      @Random-hg5wp 3 роки тому

      @Cierra Smallwood shut up cierra

  • @wanabewest
    @wanabewest 8 років тому +14

    very good video, glad you weren't around when I was making money doing this.

  • @kaimaxfield6484
    @kaimaxfield6484 8 років тому +7

    Great video! I don't have a Subaru, but thank-you so much for skipping all the chit-chat and profanities the other people have. No wonder you have so many subscribers!

  • @GuestU2
    @GuestU2 5 років тому +3

    Awesome video, was able to get my engine running based on tips off this video. NO BS video, right to the point.

  • @Eddie-wn8tu
    @Eddie-wn8tu 4 роки тому

    "Just clean it out call it good." Dude this was the best NO-BS, rapid fire video I've ever seen. You should be giving seminars on how to make videos on UA-cam. And to all the buffoon to make videos and talk about the weather and other totally unrelated stuff and have shaky cam and film their garage door while they're fixing an engine dot-dot. You need to watch this video and learn.

  • @Timmywahoo
    @Timmywahoo 7 років тому +3

    Great video for small motor carbs....to the point!

  • @Brock_Landers
    @Brock_Landers Рік тому

    Nice. Thanks bud. It's been a long time since I've worked on a small engine. The carbs always intimidated me a little. It's usually spark that gives me the most problems.

  • @happysawfish
    @happysawfish 5 років тому +1

    Impressed with your format! Great stuff.

  • @patchesm6587
    @patchesm6587 3 роки тому +2

    Thank you straight to the good parts , got the job done

  • @-DIYPRO-
    @-DIYPRO- 5 років тому +5

    1:05 and people worry about the couple drips you get at the fuel pump getting gas, haha!

    • @MtnXfreeride
      @MtnXfreeride 5 років тому

      More gas pours out the tailpipe at traffic lights

  • @xJustxJordanx
    @xJustxJordanx 8 років тому +6

    This video is extremely concise and well done. Nice!

  • @tazwowe
    @tazwowe 2 роки тому

    Bing bam boom. Great video. Short and to the point

  • @minnesotajack1
    @minnesotajack1 4 роки тому +3

    Makes a 4 minute video for something that could easily take a whole semester at a tech school

  • @keithcaldwell7187
    @keithcaldwell7187 5 років тому +2

    Great video. My pressure washer works now.

  • @gibsonf06
    @gibsonf06 4 роки тому +1

    short, sweet, and home to eat!
    great video!

  • @15thsquadron01
    @15thsquadron01 6 років тому +1

    Thanks! Now I know how to clean my Carburetor and how to do it correctly. So many Freaking tiny Parts.

  • @MrDavez
    @MrDavez 7 років тому +1

    just came here to see where the funny lil spring from the govenr goes, great pic's of all things fuel on these EX motors. Thanks

  • @dansullivan7018
    @dansullivan7018 10 років тому

    You deserve more subs!

    • @KartFab
      @KartFab  10 років тому +1

      They will come eventually. I'll just keep chugging along recording what I think is interesting, and what I love to do!

  • @Duskryn
    @Duskryn 4 роки тому

    I'm new to engine repair. I see what all the components do but what is that one piece that has the metal shroud. The one that had the black cover with the icon of a hand with an X through it?

    • @KartFab
      @KartFab  4 роки тому

      metal shroud with hand X? Probably muffler. ITs hot when running. Dont put your hand on it.

  • @xanderoldaker7865
    @xanderoldaker7865 4 роки тому

    Great video. Thanks.

  • @willsavelle7318
    @willsavelle7318 4 роки тому

    What did you spray the bolts with?

  • @kylewoods2904
    @kylewoods2904 8 років тому +1

    Solid video, soothing voice. My kart starts every time, idles nice, but when I give it gas, it dies. Is this a carb issue?

    • @KartFab
      @KartFab  8 років тому +1

      +Kyle Woods what you are describing is a lean condition. Usually the main jet is partially clogged, so you need to clean it.

    • @wakeywakey4289
      @wakeywakey4289 8 років тому

      +KartFab
      i cant get mine to quit running full blast. do you have a email or cell i could send a pic of the carb linkage to see where its not hooked up right.

    • @KartFab
      @KartFab  8 років тому

      +wakeywakey go to diygokarts forum

    • @danieljones9895
      @danieljones9895 8 років тому

      Sounds g mbpsb bfn bcc chug b' x, bub b chug ,Sounds b vscvvvvcv cbc bvvvbbvnb vg cbc

  • @Tmil1035
    @Tmil1035 3 роки тому

    When putting the auto pilot back in is there an adjustment on it or are you just tighten it down

    • @KartFab
      @KartFab  3 роки тому +1

      Auto pilot? Main is a screw, idle just pushes in on some carbs, screws in on others

  • @armedgunman01
    @armedgunman01 8 років тому

    I hade a carb problem on a robin ex27 9 hp and it seems I traded one problem for another, at idel I had to slowly give it gas to gain rpm if I just slamed on the throttle it would die, I did exactly as you did on your video n now the throttle response is perfect only now it runs at wide open throttle. everything looks normal I put all springs back the way they were but it's almost as if the the governor isn't working, any idea what I did wrong or what could of happend?

  • @connellrowe6125
    @connellrowe6125 10 років тому

    Nice video, is this process similar for a Honda GX240 engine.

    • @KartFab
      @KartFab  10 років тому +1

      Yes very similar.

  • @MartyChristianSoldier
    @MartyChristianSoldier 7 років тому +7

    But, to avoid all of this just use sta-bil in your gas.

  • @marvicty
    @marvicty 6 років тому

    @Kartfab; do you happen to know if someone makes an aftermarket air filter kit similar to the Predator type?

    • @KartFab
      @KartFab  6 років тому

      Not sure but you can also just get a pvc pipe end cap and drill it out and slap a filter on it :-)

  • @OnTheDLum
    @OnTheDLum 2 роки тому

    Idle pilot screw needs to be screwed all the way down note the twists before removing so you can replace it right. Also be very careful with needles they may be plastic and rubber tip rubber tips will be destroyed very easily if you are not careful

  • @joeblowjohnny2297
    @joeblowjohnny2297 7 років тому +1

    Hi , I have the same subaru x21 design as a water pressure pump . Can this design still be good to convert into a mini bike are go cart engine ? Some people are telling me water pump sometimes have short connecting rod and won't produce e eough rpm or torque to run a mini bike , is this true , what about this engine design , can it be done ? Thank you so much for your reply greatly ! Thank you !

    • @KartFab
      @KartFab  7 років тому

      +Joeblow Johnny crankshaft may have issues with taper or length. If it’s a straight crank you should be ok

  • @TheRealJohnJ10
    @TheRealJohnJ10 4 роки тому

    Great job.

  • @Bassmaster-qy5cw
    @Bassmaster-qy5cw 9 років тому

    i noticed that the jets have a super tiny hole..does it matter when putting it back together where they end up pointing at?

    • @KartFab
      @KartFab  9 років тому

      No it does not matter since it is a cylinder. Just use the right size screwdriver and do not over torque since it is brass.

  • @dsmc0155
    @dsmc0155 7 років тому

    Very nice video! I bought a Predator engine from HF last year. This year it will start and run a few seconds and die. After a few minutes it will do the same thing again. Any Ideas?
    thanks
    David

    • @KartFab
      @KartFab  7 років тому +1

      dirty carb

  • @juanignaciosanchez552
    @juanignaciosanchez552 7 років тому +2

    Very helpful ...!!

  • @samyza200
    @samyza200 4 роки тому

    I put the carb cleaner in the carb well it was running

  • @daynerussell7293
    @daynerussell7293 7 років тому

    That was nice informational thanks helped alot

    • @KartFab
      @KartFab  7 років тому +1

      +gun talk and builds no problem

  • @willthethrill8766
    @willthethrill8766 9 років тому

    my kart only starts when I prime the cylinder but once that is prime is gone it dies. I think it might be a carb issue but not sure. I cleaned the carb but didn't take it apart like in this video . what do you think?

    • @KartFab
      @KartFab  9 років тому

      +Will Loubriel fuel delivery problem.

  • @Bruh-px4tr
    @Bruh-px4tr 4 роки тому

    What’s the stuff you are spraying to clean the parts?

    • @KartFab
      @KartFab  4 роки тому +1

      Carb cleaner

  • @anti2planker
    @anti2planker 8 років тому

    New to small engines. What is the breather tube?

    • @KartFab
      @KartFab  8 років тому

      +anti2planker valve cover vents through the breather tube. Most new engines have this tube vent back into the carb.

  • @ryancharyk3979
    @ryancharyk3979 7 років тому

    i recently started working at a small engine shop and i use welding tip cleaners to clean the main jet in all the carbs i rebuild!! just a heads up if your carbs jets are very dirty!

    • @KartFab
      @KartFab  7 років тому

      +Ryan Charyk nice! Are they the little bristles?

    • @ryancharyk3979
      @ryancharyk3979 7 років тому +1

      KartFab it's more like a rounded file like a rat tail file if you k ow what that is!! I use it all time and it works great, try it out for ya self if ya want to!!

    • @KartFab
      @KartFab  7 років тому

      +Ryan Charyk got it.

    • @ryancharyk3979
      @ryancharyk3979 7 років тому

      If ya use it let me know how it works for ya!!!!

  • @drone_crazy
    @drone_crazy 2 роки тому

    Yea I’m A beginner go latter and I think I’m gonna let someone do this for me lol so much steps

  • @groovehog1
    @groovehog1 8 років тому +1

    thank you, great explanation & video!

  • @omarrangel88ify
    @omarrangel88ify 7 місяців тому

    Thank you!

  • @armedgunman01
    @armedgunman01 8 років тому

    I half to hold the throttle closed by hand if I let it go the govenor springs back open

    • @KartFab
      @KartFab  8 років тому

      Sounds like you introduced a new problem. With the engine not connected to a remote throttle cable does it do the same thing? Do you have a throttle return spring? Set on manual throttle or remote?

    • @armedgunman01
      @armedgunman01 8 років тому

      +KartFab no the engine is sitting on my bench with nothing connected to it, I could be wrong but isn't the govenor hold the throttle open when engine off and when the engine is started the govenor closes the throttle? the govenor pulls the throttle open and runs the engine wide open..in the end of your video I noticed before you start your engine the gov holds the throttle open when you pull start it the gov closes the throttle. mines doesn't do that. there's no resistance from the govenor to close the throttle? I'm stumped by this condition because it started doing that after I disconnected the throttle linkage from the carb.. great video by the way I got into carts not to long ago and your you visit are very helpful

    • @armedgunman01
      @armedgunman01 8 років тому

      +luis flores** your videos**

    • @KartFab
      @KartFab  8 років тому

      hmmm... double check linkages, check users manual. You didn't mess with the governor arm did you? E.g. the arm connected to the governor shaft in the engine.
      The governor holds the throttle WIDE OPEN on start up, that is what it is designed to do. Once the engine starts, the throttle lever controls the throttle butterfly, and the governor does not really do anything until 3600 rpms, where it begins to close throttle as you can see in the video. It would not hunt like this under load though.

  • @kicker152
    @kicker152 7 років тому

    I have same exact engine what oil does it take and how much does it take thank you

    • @KartFab
      @KartFab  7 років тому

      +Robert West that info should be in the users manual

    • @kxlucifer
      @kxlucifer 7 років тому

      Robert West 4 cyle oil,10-30 is also.fine..just.dont over fill.

  • @miked5094
    @miked5094 4 роки тому +1

    how much gas did you waste?

  • @joshhurst4516
    @joshhurst4516 8 років тому

    What are you using to spray it? WD-40 or a special spray?

  • @martinramirezjr7872
    @martinramirezjr7872 8 років тому

    Hey +KartFab, I have a Predator 212 from HF and I've been having an issue with it shaking and coming close to dying/putts a lot after throttling. Can you help please?

    • @KartFab
      @KartFab  8 років тому

      any mods? did you let it warm up? choke on or off?

    • @martinramirezjr7872
      @martinramirezjr7872 8 років тому

      No mods. I did for several minutes with choke on. I think it may be running too rich because when I checked the plug it was sooty.

    • @KartFab
      @KartFab  8 років тому

      if its almost dying after throttle, and everything else is fine, you need to adjust the idle speed screw. It is a black plastic screw that sits on top of the carb. Turn it clockwise (after engine is warmed up and choke is off) until the idle is where you want it( which is usually ~1650 rpm)

    • @martinramirezjr7872
      @martinramirezjr7872 8 років тому

      Thanks!

  • @juancalderon5073
    @juancalderon5073 8 років тому

    will do. thank you for the help.

    • @KartFab
      @KartFab  8 років тому

      no problem

    • @micoperez8242
      @micoperez8242 8 років тому

      +KartFab i have a problem with my baja mini bike 196 it will start then it will bogg out or will not start at all any suggestions??

    • @KartFab
      @KartFab  8 років тому

      clean the carb

    • @kxlucifer
      @kxlucifer 7 років тому

      Mico Perez carb got varnish..or else bad gas or plug or blocked.fuel line..replace the plug,fuel line add an inline filther clean the carb guarantee it will fire right up.and no more deposits in carbs because inline filther catches it..

  • @gaming_volt5686
    @gaming_volt5686 8 років тому +2

    hi i cant remove the bolt from the middle

    • @KartFab
      @KartFab  8 років тому

      +Gaming_Volt make sure the screwdriver fits

    • @gaming_volt5686
      @gaming_volt5686 8 років тому

      KartFab thanks i did it

    • @gaming_volt5686
      @gaming_volt5686 8 років тому

      KartFab but before i remove to clean the carb it was accelerating but it self

    • @gaming_volt5686
      @gaming_volt5686 8 років тому

      KartFab why it accelerates by it self

    • @gaming_volt5686
      @gaming_volt5686 8 років тому

      KartFab hello I got a question why it accelerates by it self

  • @greenjelly2428
    @greenjelly2428 9 років тому

    Is there a cheap gas tank that a fits Robin Subaru EX27 10 hp because the replacement part is 80 dollars

    • @KartFab
      @KartFab  9 років тому

      +Dr_joe_smo 24 unfortulately, the subaru engine replacement parts are prohibitively expensive.

    • @63ch31
      @63ch31 9 років тому

      You can probably make a cheap chinese tank fit if you work on it a little.

  • @juancalderon5073
    @juancalderon5073 8 років тому

    can you please help. my son's gokart is leaking gas from the air filter. when I turn the gas lever on, from the gas tank to the gas filter to the carburetor, alot of gas leaks out and continues to leak out from the air filter. is this a bad carburetor? TIA

    • @KartFab
      @KartFab  8 років тому +1

      open the bowl from the carburetor. Check the float (usually round plastic thing) shake it to make sure there is no gas inside. Next, check the needle (thing that is attached to the float) it has a pointed tip, that tip needs to push up against a round seat. When you have gas leaking out of the air filter it is because the float is full of gas or the needle is not seating properly to keep the gas out.

  • @ernestcuevas111
    @ernestcuevas111 8 років тому

    Thanks very helpful

  • @rickyhartsock858
    @rickyhartsock858 2 роки тому

    My go-cart is brand new and I can't remember the size and it will not start it's getting gas and the compression is good and the plug is getting all kinds of fire..it will sling spark good please please help me I am witts end with this thing

    • @KartFab
      @KartFab  Рік тому

      Kill switch engaged? Spray a tiny bit of carb cleaner in it and see if you can get it to turn over

  • @AaronSpencer
    @AaronSpencer 9 років тому

    Ever heard or soaking the carb in diesel fuel to help loosen the gunk? I heard that helps but I'm not sure. I might try soaking it overnight then taking it apart like in your video the next day.

    • @KartFab
      @KartFab  9 років тому

      +Aaron Spencer I have only cleaned carbs with carb cleaner and some elbow grease. I have heard, that boiling them in lemon juice works too though (never tried it).

  • @metalfreak9699
    @metalfreak9699 9 років тому

    i have a engine on my go kart just like this but its called a robin i cleaned the carb but when it starts it takes off by itself

    • @KartFab
      @KartFab  9 років тому

      +Carter Scott robin subaru is the name/brand. You probably have an idle issue. There is a screw on the carb that keeps the carb butterfly from moving all the way closed, try adjusting that first. It could be a clutch problem too.

    • @metalfreak9699
      @metalfreak9699 9 років тому

      ok thx

    • @metalfreak9699
      @metalfreak9699 9 років тому

      on the throttle butteryfly it pushed back instead of staying in the front

  • @introllgaming1878
    @introllgaming1878 6 років тому

    My go cart it turns over fine but it doesnt go and the clutch does nothing is this a carb problem

  • @waylonrose9823
    @waylonrose9823 6 років тому +2

    I was so confused for a second cause I have an older Briggs

    • @KartFab
      @KartFab  6 років тому

      Yeah the Briggs flathead? Totally different. Those are pretty easy to clean though. Just gotta watch out for cracks in the pick up tube and there is a rubber piece inside that gets stiff with age that sometimes needs replacement. It helps pump fuel in.

  • @kylemcgrath5796
    @kylemcgrath5796 6 років тому

    Exact engine I needed help with

    • @KartFab
      @KartFab  6 років тому

      glad i could help

  • @congragulationsyouplayedyo6593
    @congragulationsyouplayedyo6593 6 років тому

    Help, my pocket bike runs and revs but will not move. Any help??

    • @KartFab
      @KartFab  6 років тому

      clutch? revs high enough:?

  • @guitartips1016
    @guitartips1016 4 роки тому

    Thanks

  • @Jrod1702
    @Jrod1702 11 місяців тому

    Thanks Dad

  • @mikemichael8683
    @mikemichael8683 5 років тому

    Professional..

  • @chickenisjus2good
    @chickenisjus2good 9 років тому

    This is a good video. Could go a bit slower as my brain is slower.

    • @KartFab
      @KartFab  9 років тому

      chickenisjus2good Sorry about that, I would rather be concise and to the point than draw it out and waste everyone's time. Hope that makes sense. Did you have a problem with your carburetor and fixed it? Let me know if you have any questions.

    • @902isfake
      @902isfake 9 років тому

      There's a setting where you can play the video slower lol

  • @guitartips1016
    @guitartips1016 4 роки тому

    8 out of 10

  • @deancollins4790
    @deancollins4790 7 років тому

    what if it ain't kno Subaru motor

    • @KartFab
      @KartFab  7 років тому

      +Dean Collins most carbs are very similiar

    • @deancollins4790
      @deancollins4790 7 років тому

      yeahh they is

  • @shantor100
    @shantor100 5 років тому +4

    Geez dude. Pour the gas into a container. Every time it rains all that gas makes it to the ground and sewer

    • @lostintime8651
      @lostintime8651 5 років тому +3

      back in the old days when they made kerosene for lamps, the byproduct was gasoline. they had no use for it so they dumped in the river. his little bit of gas on the ground makes zero impact. get over yourself.

  • @jamesdahmer5027
    @jamesdahmer5027 7 років тому

    nice to see all that fuel just end up on the driveway into the gutters...

    • @KartFab
      @KartFab  7 років тому

      It evaporates

  • @groovejet77
    @groovejet77 2 роки тому

    didnt show how to get the freaking float bowl off. That is really ticky and would be good to show slowly

  • @mlpputo1732
    @mlpputo1732 6 років тому

    Still Cant I Broke Mine In Half Last Night When I Jumped It XD

  • @keshonfinley5970
    @keshonfinley5970 6 років тому

    Got a yerf dog go kart

    • @KartFab
      @KartFab  6 років тому

      Tecumseh engine?

  • @Victor-cs6pb
    @Victor-cs6pb 8 років тому

    You Smoke??

    • @KartFab
      @KartFab  8 років тому

      +Victor linerio no

  • @meekslt5
    @meekslt5 6 років тому

    huh

  • @TheEffoff
    @TheEffoff 3 роки тому

    Try not to hit your cameraaaaaa

  • @keshonfinley5970
    @keshonfinley5970 6 років тому

    This video didn’t really help me