Printing, Matting & Framing Photographs to Archival Standards
Вставка
- Опубліковано 20 бер 2016
- Follow the process for archival quality production, storage and display of digitally printed photographs at Raymond Parker Photography.
Logan Graphics 750-1 Simplex Elite Mat Cutter @ B&H: bhpho.to/3qk2FbN
Read more at: raymondparkerphoto.com/printin...
Careful consideration is given to printing on acid free, rag papers, then matting and framing also using 100% rag mat board and conservation framing procedures. We show you how to cut a mat and assemble the matted print for attractive, contemporary display.
Incidentally, the print shown in the video is from the photographer's collection Eighties Vancouver.
raymondparkerphoto.com/eighti...
raymondparkerphoto.com/eighti...
Prints available in limited and open editions. shop.raymondparkerphoto.com/c....
Check out the following video for tips on printing quality posters: • How to Turn Your Photo...
Subscribe for more cool videos: / @raymondparkerphoto
Support my channel:
paypal.me/RaymondParkerPhoto
*******************
Affiliate Disclaimer
*******************
*Raymond Parker Photo is a participant in the B&H Photo Video affiliate program that provides an advertising commission if you purchase through our links.
If you purchase something from our affiliate links we will get a small commission with no extra cost to you. This makes it possible for us to make more videos. Thank you!
We DO NOT collect, store, use, or share any data about you. - Навчання та стиль
That is probably the best video on UA-cam coving this topic!!!
Something I recently learned: the matting has to be 3 inches for it to be considered archival.
8ve been obsessed with watching these kind of videos lately ❤❤❤❤
Watching this clip was poetry in motion indeed. Thank you @Raymond Parker , best wishes from Auckland , New Zealand
Thank you!
You’re at a completely different level. Very impressive.
Wonderful video - packed with great info! Thank you for creating and sharing it!!
Thank you Raymond! I'm really appreciative of the content and production of this video. Stay well!
Thanks, Bryce. Appreciate the compliment.
Beautiful video, the best so far on the subject.
Thanks, Mark. Glad it helped.
Just came across your video as I am making mountain ash wood frames for some prints. Best video I have seen on matting and framing.
The story on those frames is this: I came upon a source for first growth Douglas fir that had, for 80 years, formed the giant beams in a paper mill in a remote town on the north coast of British Columbia.
The mill went bust and everything was sold off. A guy barged a few tons of the beams down the coast, to Victoria, BC. I had him rip some into manageable pieces (around 2" x 6") and then, with the help of a friend who owns a woodworking shop, we milled everything into the profile you see in the video.
I still have about 800 linear feet. The end grain is incredibly tight and beautiful. To find that today is very rare -- it's all been logged.
Ash would make very nice frames, I'm sure.
This video belongs on a museum.
No, literally.
wow, thank you for illustrating your beautiful method! Beautiful technique for a polished finish.
Glad it was helpful!
Beautifully done. Beautiful music too.
Thank you very much!
Nicely done!
thank you so much for this! video is beautiful and very informative!
babixillo Glad to help.
This is all very familiar as my Dad did his own black and white processing and later had his own color lab prior to doing digital when it came about. He framed his own work.
Nice work. Thanks for sharing this.
Thank you, Mark. My pleasure.
Beautiful craftsmanship, sir.
Thank you kindly
amazing and so relaxing to watch
Glad you enjoyed it
incredible work
Thank you. Glad you enjoyed it.
Thank you for your reply!!
Excellent !
Great video! Very informative. Im getting ready to prepare my first two prints for a local exhibit sponsored by our University.
Good to hear! Exhibiting your work as prints is a great experience. Long live prints!
ua-cam.com/video/4k_4oR1NtOQ/v-deo.html
ua-cam.com/video/bSpqpOn9wV0/v-deo.html
Great video, thank you very much ♥️
Thanks and glad you liked it.
This has to be the best framing video on UA-cam , thank you! I've got a question, I just framed a massive 66 inch long print and this is what the framing guys used:
MDF as a backing board
MDF covered in cloth for the window
Doble sided tape to attach the photograph to the window
Sealed the frame with water activated paper.
What would've been the correct way to do it ?
Thank you again.
Hi Rodrigo. MDF would be the last thing I'd want near important artworks. It will offgas urea-formaldehyde. Not good. Honestly never heard of MDF as mat. Again, not something I'd use in conservation framing. Larger images can be difficult to keep flat. In that case, there is an argument for dry mounting ... but conservation-grade materials should always be used if archival permanence is the intention. Unless there is a "sacrificial" border, double-sided tape isn't the way to go. The hinging method illustrated in my video is the accepted "reversible" method of attachment.
Check out the full tutorial at raymondparkerphoto.com/printing-matting-and-framing-photographic-prints-to-archival-standards/
Cheers,
Raymond
raymondparkerphoto.com
Very helpful video. Let’s assume the original print’s aspect ratio is 4:5 or 2:3. What’s the aspect ratio of the final framed piece in this video?
If those would be darkroom prints then it would be the best framing video ever!
Here you go: ua-cam.com/video/4k_4oR1NtOQ/v-deo.html
Thanks!
No problem! And thank you!
Nice & Thank you :)
You're welcome. Glad you like it.
Thank You very much for posting this. I wanted to ask, is the 2 ply blank for base mount the same as what I might use foam backer board for?
Glad to help. Yes, you could omit the 2-ply mat and just use foamcore in its place (make sure it's acid free). However, I prefer the added protection provided by the hinged 100% rag enclosure. As you see in the video, I use the foamcore as the backing in the aluminum frame. The homemade wooden frame uses an insert over plasticore.
More info at the blog page: raymondparkerphoto.com/printing-matting-and-framing-photographic-prints-to-archival-standards/
Great video! Thank you for this informative walkthrough. Question: what type of ink do you recommend for an edition stamp? I recently got this stuff called Ranger Archival but it is visible on the image side of the print! I'm printing optical enlargements on Fuji Crystal Archive Type-C and Kodak Endura. Thanks for any help :)
Thanks for the question, Joseph. I'm using something called StāzOn, by Tsukinoko. It seems fine. I don't have any bleed through issues with the papers I use: 100% rag papers with average thickness of 310 g/m₂. I also leave a genrerous border around the image so front and "en verso" additions -- signature, stamp and embossing -- don't impinge on the photo area.
@@RaymondParkerPhoto thanks for letting me know. I'll give it a try. Both those Fuji and Kodak RA-4 papers are about 250gsm, so hopefully they'll be heavy enough for that stamp ink. I'll let you know how it goes 😊
merci de france
Thank you for a very informative video! I'm hoping you could please help with a couple of questions. I'm mounting a 55"x36" print and was going to use 3" archival mounting corners. Are the mounting corners sufficient to hold the print in place to the back board or should I add T-hinges like in your video, if so how many? Also, is there a type of embosser that is preferable for prints and where do you recommend getting one from? Thanks!
Hi, Gerardo. I wouldn't use corners; that wouldn't likely stabilize such a large print. Dry-mounting would likely be advisable at that size. Otherwise, I'd like to see a very generous overlap of the mat on the print ... and make sure the environment where the print is hung is pretty stable in terms of temperature/humidity. You'd want at least half-a-dozen hinges, I'd think.
I can't speak to your question about embossing. My only experience is with plaque mounting, which I farm out to shops with that equipment -- for my posters, for instance. shop.raymondparkerphoto.com/collections/posters
@@RaymondParkerPhoto Came back to rewatch your video. Thanks replying. I went with your mounting tips, the artwork is holding up nicely and looks great!
@@GerardoM_com Great! Thanks for coming back to report on your experience. What process did you go with?
@@RaymondParkerPhoto Can't recall how many, but I applied a generous amount of hinges as well as large mounting corners.
What were the reasons behind the aperture distances? They looked like 60% 40%
what brand are those gloves? where I can buy those gloves? link please.
Love the video. Where can I purchase an Edition stamp and seal of authenticity? Thanks.
Glad you enjoyed the video, Jacqueline. I had mine made at a local stamp shop (the seal a simplified version of my logo).
great video, what kind of paper did you cut to make this fantastic white border effect, can I make it at home?
It's mat board, bought from an art store.
Amazing. Though I must ask why do Framers put small objects in the middle of the picture when framing?
To prevent the print from shifting when they lift the window mat.
Is the backing board the same as the window mat? Thanks for the video.
The backing is 2-ply. Then foamcore.
Hi Raymond. What size thickness foam core backing board do you typically use? 3/16 1/8?
Acid-free 1/8".
Is the t-hinge strong enough to keep such a large print flat? Im asking because Im searching way to keep my darkroom fibre-based prints matted and framed and keep flat at the same time.
The answer to that question depends on print size and print margin (which I like to keep generous). I've been using this method since the 80s when I printed on Ilford Galerie fibre-based paper. In fact, I still have the booklet produced by Ilford illustrating the method. See here: raymondparkerphoto.com/printing-matting-and-framing-photographic-prints-to-archival-standards/
Just watched this video, where did you get the seal embosser?
I had it made.
Do you have a video about float mounting artwork?
Sorry, no.
Quick question: what kind of ink do you use for stamping? If the pen should be archival, should the stamp too?
All archival inks.
@@RaymondParkerPhoto Do you have any brand to recommend? I'm thinking of using Range Archival Inks
I recently switched to Ranger pads for the stamp.
@@RaymondParkerPhoto nice!! i'll try those. Thanks!!
need spill all the brand especially that printer
Eggsalent!
It really isn't much. But the amount of free knowledge in this video is almost a crime. I really wish you could find better ways to monetize the value of this video. All the best.
Thank you! The support is very much appreciated. That this remains one of my top performing videos, 7 years later, says something about its value, I guess. At any rate, it's satisfying that I can pass on knowledge that is much older than this video 😀
Where and how can I get the materials used ?
Depends where you are. Try art supply store or order online?
Where do you get the Black storage cases/folder?
The magnetic folders, unfortunately, are no longer available from Opus Framing here in Canada. Glad I stocked up. The archival box I use is available from B&H, made by Archival Methods.
NOT WORRIED about the print sticking to the glass?
That's not possible. Please watch the video.
I want to print a picture by you.....special requirement....please tell me how can I contact you.