Your videos are like helping hand. How i feel while watching your videos you know, a friend who explains the whole topic in few minutes just before the exam..
I am from cs branch very confused in all these things but now it is crystal clear thankyou very much for this lecture none of the video on you tube can beat this
That's the one of the best comment I have received on UA-cam I am really happy and excited to see such comments Thanks a lot for so much appreciation 💗
You are a great Teacher Sir, Please continue on to make videos of the most fundamental principles to master the basics of Electrical Engineering. Thank You.
Thanks a lot! Our lecturer didn't teach us nodal analysis, which is said to be the easiest method to solve kcl/kvl. Looked up on UA-cam and saw ur channel. Surely a life saver! Thanks again
In the 1st equation v1-6 I get it but why the v2 is in subtraction. As high is connected to high so - but then the low portion of 6v is going to v2 means at high so it will be like this right v1-6+v2.
my sir said that you have to solve the problem on board on tomorrow but i don't no how to solve. after seeing this video it looks very easy thank you for this videos sir your well explaining well very easy . once again thank you so much sir now i am having more confidence to solve the problem on class room board before all the students.
Thanks to you for giving respect by writing such detail comment. Once you done with your explanation Share this with your friends so that everyone can be help with understanding the concept
14:14. Here in node v2, v1 is in lower potential and 6v is in higher potential,so we add the voltage.Then why did you subtracted it. PS: your class is so use full...thank you.
Whenever we are at any node we consider it to be at higher voltage And regarding 6 V when V2 is higher 6V negative is connected so.we add it Thanks a lot for your doubt And most welcome
I have a question. At 4:40 (super node), you mentioned the outward direction for the V2 node. However, earlier, you already indicated the current flow from V1 to V2, which implies that for V2, instead of an outward direction towards V1, the current flow should be inward. The same should apply for V3 as well. Is that a mistake?
Sir how to solve node i mean when we apply kvl and make the equation then how we obtain our answer E.g :how to solve V1-V2/2+V1-V2/10=0 In this type of equation how to solve it you tell in this video taking l.c.m then if we take l.c.m then what we can do next?
@@YEE-qn1kv while calculating resistance make sure voltage source are short And current source are open And if resistance are connected to each other at both the terminal then it is parallel If it is connected to one terminal then it is series
@@ZarrarKhan like in supernode analysis. Most people redraw the diagram and remove the non - reference voltage and solve it. But you don’t seem to do that here. And is pretty easy
Brother app bohat acha samja rehe ho but last me sub youtuber ko calculater ke jurrat kyu padti hai..... brother kuch kuxh exam me calculater nei use karne dete Kryipa kar ke app question ke till end tak solution kar ke video ko end kar 🙏
salam sir, at 8:16 shouldn't (V3-V1) have a negative symbol since it is the only one entering the node whereas the others are going away from the node. I hope you clarify this asap. Your videos have been so helpful for me i really appreciate it
Sir Super node is made short ckted But you have solved it in simple way means not following the super node system What is the reason sir? I would be very grateful to you if you explain the reasons. Thanks in advance sir.
Suddenly it seems simple 😅😅 Thanks a lot Dude. Keep on the good work
Your most welcome
thanks for such wonderful comment
Your videos are like helping hand. How i feel while watching your videos you know, a friend who explains the whole topic in few minutes just before the exam..
Thanks a lot for such wonderful comment
Happy to receive such comments
Blessed to get motivated by such words
Kal mera exam hair 🤣🤣🤣 lekin phy bohoth pasand hai...
I am from cs branch very confused in all these things but now it is crystal clear thankyou very much for this lecture none of the video on you tube can beat this
That's the one of the best comment I have received on UA-cam
I am really happy and excited to see such comments
Thanks a lot for so much appreciation 💗
You are a great Teacher Sir, Please continue on to make videos of the most fundamental principles to master the basics of Electrical Engineering. Thank You.
Thanks a lot for such generous comment
Yes will make more video
Thanks a lot! Our lecturer didn't teach us nodal analysis, which is said to be the easiest method to solve kcl/kvl. Looked up on UA-cam and saw ur channel. Surely a life saver! Thanks again
Your most welcome
Thanks a lot share it with your friends
So many videos on the same topic on UA-cam but your presentation is awesome.
Thanks for such wonderful comments Thanks a lot once again
In the 1st equation v1-6 I get it but why the v2 is in subtraction. As high is connected to high so - but then the low portion of 6v is going to v2 means at high so it will be like this right v1-6+v2.
It was so simple I realised today 😂. Thank you sir
my sir said that you have to solve the problem on board on tomorrow but i don't no how to solve. after seeing this video it looks very easy thank you for this videos sir your well explaining well very easy . once again thank you so much sir now i am having more confidence to solve the problem on class room board before all the students.
Thanks to you for giving respect by writing such detail comment.
Once you done with your explanation
Share this with your friends so that everyone can be help with understanding the concept
14:14. Here in node v2, v1 is in lower potential and 6v is in higher potential,so we add the voltage.Then why did you subtracted it.
PS: your class is so use full...thank you.
Whenever we are at any node we consider it to be at higher voltage
And regarding 6 V when V2 is higher 6V negative is connected so.we add it
Thanks a lot for your doubt
And most welcome
@@ZarrarKhan thank you👍
@@safwdp most welcome
@E -23 manasa K YAHI SAMJH NAHI AA RAHA HAI..PLZ KOI CLR KR DO ESSE
This guy needs justice.Hit the like button just don't view and leave when you can get nice concept explanation for free.
This is awesome comment
Thanks for such wonderful comments and appreciation.
zarrar sir you are totally diffrent from others . ap tough chezu ko bhi simple bana dete ho with comsumtion of time ... keep going on sir
Thanks a lot
Happy to see such comment
I will work more hard to bring more better content
Sir, what if there is only voltage source between two nodes??? PLEASE HELP ME.....
So helpful!
Your welcome
i got it sir.. thank you so much for this flawless lecture.. is there any shortcut to save time sir?
THANKS FOR SUCH wonderful comments
Will upload soon
Amazing video sir, thanks a lot u just made super node very easy to understand ❤️
First time understood sir
Thanks a lot
Thank you sir doing this wonderful teaching this method sir
Your most welcome
Happy to see such appreciating comment and it motivates me to do more
You are the best sir,you explain very well🥰🥰🥰🥰
Thanks a lot for such appreciating words
excellent sir....best explanation
Thanks a lot
Very Nice👌👌
Thanks 😊
Very much helpful for us sir (nice explanation)
Thanks a lot 💓
Thnx sir
I was waiting for this🎉🎉
Your most welcome
Done with ur request
how did u calculate the numbers after finding the lcm? for ex: at 5:40 how did u get -5, 17, and -10?
Sir may I ask if i can transpose 2 on the other side and make it -2 since its current is moving away from the junction?
Make sure you consider only one direction throughout your circuit.
walkm asslm sir thanks a lot love from U.P India
Thank you sir it was so helpful
Your most welcome
So helpful,. Thanks
Your most welcome
Pls give a lecture on how to find this using determinant method
I will upload video
It is known as cramers rule
I have a question. At 4:40 (super node), you mentioned the outward direction for the V2 node. However, earlier, you already indicated the current flow from V1 to V2, which implies that for V2, instead of an outward direction towards V1, the current flow should be inward. The same should apply for V3 as well. Is that a mistake?
Thank you Sir, your channel is a blessing to us
Your most welcome
Happy to receive such comments
Thanks a lot
tnx sir... u helped me memorise my 4yr earlier course topic...
Thanks a lot for such generous comment
Very helpful
Thanks a lot
وعليكم السلام ورحمة الله وبركاته
🌹🙋♂Sir🙋♂🌹
💐جزاك الله خيرا في الدنيا الاخره 💐
Ameen
May I know your country
@@ZarrarKhan
India Sir
And you?
@@01mdmoksedurrahamanansari15 same
Amazing, I watched other tutorials but stumbled on minor details of the questions bcoz they weren't teaching in detail like you did, Thank you
You're very welcome!
Thanks for such detail comment
Good
Thankuuuh sir♥️
You nailed it🙏
Your most welcome And thanks for such wonderful comment
Super
Thanks a lot for comment and appreciation
Ek no.
Thanks a lot
Nice explanation, thank you sm
Walekum assalam ✨
& Thankyou so much ✌️
Your most welcome
Just remember me in your prayer
@@ZarrarKhan 💯😊
Excellent teaching sir really great
Thanks a lot so much for great appreciating words
@@ZarrarKhan ❤
Sir how to solve node i mean when we apply kvl and make the equation then how we obtain our answer
E.g :how to solve V1-V2/2+V1-V2/10=0
In this type of equation how to solve it you tell in this video taking l.c.m then if we take l.c.m then what we can do next?
Will make video and upload it
Awsm sir ji
Thanks a lottt
For your comments
Sir u should show the calculation part also bcz some dk how to calculate this stuff :)
From next video
I will make sure
Amazing lecture bro
Thanks a lottt
Very useful. Thanks 😊
Your most welcome
Sir please make a video on ac circuit problems
I will try asap
Thanks
Welcome
Super bro 🥳
Thanks a lot 🙏
How do we know resistors are connected in series or parallel and how to combine them and connect in circuit again
@@YEE-qn1kv while calculating resistance make sure voltage source are short
And current source are open
And if resistance are connected to each other at both the terminal then it is parallel
If it is connected to one terminal then it is series
Thanks a lot . Helped a lot . Mast 👍🏻
Your most welcome
Awesome comment
🙏🙏🙏
Thanks a lot🙌🙌🙌
Sir please put videos related to op amp problem solving
Sir, ur a rockstar
U r awesome sir
Thanks a lottt
Bro...plz keep videos on more complex and so what more loop ..... To solve ....easy...
Sure
Sir your voiceeeeeeee 😭💖💘
Thanks a lot 🙏 💓👍
Bro if the 2ohm resistor doesn’t exist in battery which is series connected then how we solve this problem?????
Please make a video on this topic
Ok good suggestions
I will make a video on such different aspect
kindly take up complicated circuits. easy ones won't be coming for any exams
either way, thanks and good work btw!
Your lectures are grate sir 🙌🙌🙌
Thanks a lot sir
Nice 🙂
Thanks a lot
@@ZarrarKhan no actually I am thx , teachers don't teach us these short cuts 🙃
@@yashchavan7384 your most welcome for such appreciation
thank you brother
Your most welcome
Sir what will changes will happen if we assume that current is incoming towards the junction point ??
god
Nope I am just a human
Tq
Your most welcome
Super node and super mersh is important for neet
Yes thanks a lot
tq sir...
Most wc
Sir, Please make a video of dc response to transient circuits
I will try to upload asap
👌👌
Thanks a lot
Thank you very much sir!🙏
Thanks sir ❤️🇧🇩
Your most welcome ☺ 👍
with this formula you dont need kvl right?. or remove the non-reference voltage and make a whole new diagram to solve the question
Sorry I didn't got your question
@@ZarrarKhan like in supernode analysis. Most people redraw the diagram and remove the non - reference voltage and solve it. But you don’t seem to do that here. And is pretty easy
@@liv2.9 yes you can follow my way it is 100% correct
And thanks a lot
@@ZarrarKhan ok thank you
Sir can u explain superposition,theveniens,nortons theorems with examples plzzzz sir
Yes will be uploaded within few days
Tq so much sir
@@Thadem_kalyani i have uploaded NORTON and Superposition theorem
Sir why do we need to subtract the higher potentials?
It depend on polarity
What if there is no resistor near the 6V
if I romove 3A and 2A , how many nodes in this circuit?
Sir what if there is voltage source b/w 2 nodes without resistance what will be the constrain equation
Awesome question the answer is simple
We will either add those voltage or subtract voltage
Thank you so much for your support 😊💞
Your most welcome
Thanks for comment
Awesome work sir👍👍👍
how do you do this without resistors in the supernode? seems like it becomes very complicated
It's simple if there is no resistance between two node then it is the same node
Plz also show how to find v1 v2 v3 because in exam we don’t allowed to use calculators
Thank you so much sir
Your most welcome
Thanks for the comment
Brother app bohat acha samja rehe ho but last me sub youtuber ko calculater ke jurrat kyu padti hai..... brother kuch kuxh exam me calculater nei use karne dete
Kryipa kar ke app question ke till end tak solution kar ke video ko end kar 🙏
Ok bhai
Koshish karuga Cramer rule se equation ko end karke final solution du
Thanks for such wonderful comments
Thank you so much again, sir !
Your most welcome Happy to see such comment again
Thanks for commenting again 👍 😊
May I know u are from which country
@@ZarrarKhan I'm from Azerbaijan :)
@@Average_Turkish happy to hear that
I am from INDIA 🇮🇳
@@ZarrarKhan Nice :3 👍👍
@@Average_Turkish thanks a lot
Sir u saved me 😍😍😍
Thanks a lot for such comment and appreciation 👐
Bhaiyya when to apply kvl and when to apply kcl, how to understand it ?
Sir 🙏🤜🤛
Thanks a lot 🙏
salam sir, at 8:16 shouldn't (V3-V1) have a negative symbol since it is the only one entering the node whereas the others are going away from the node. I hope you clarify this asap. Your videos have been so helpful for me i really appreciate it
sir has taken it away from the junction ...if u listen carefully..
@@ignknight5699 thank you for pointing it out!
12:10 wrong lia voltage ka sign
Thanks man ❤❤
in the second question what will be the equation if there is no resistor present in between both nodes V1-6-V2/?
i was about the same quetion , but try putting zero there and lets seee
How to loop is coming explain
Plz solve the whole question..It's seems easy but when u start doing it then the answer is not same
Sir can u please explain why u r taking -v2 in first equation
Is laptop is compulsory for b tech engineering student.
Depends
But according to me
It should be compulsory and to explore job and other required skills
thank you😪
Your most welcome
10:00
Sir
Super node is made short ckted
But you have solved it in simple way means not following the super node system
What is the reason sir?
I would be very grateful to you if you explain the reasons.
Thanks in advance sir.
Hello sir
Sorry but I didn't get your question
SN 10:05
Thanks a lot
Thank you sir❤️
Who is watching in 2024?😂😅