Nice tips have you thought about changing the factory breaks pad to a ceramic pad, I use akebono ceramics works great no brake dust only road grime. Crazy part is did not see any loss in breaking performance of course I don't track my car and I do have 8 cars so I actually not a daily and have not had to replace pads front or rear on over 50 thousand miles of driving and I can almost just hose off my BBS powder coated RX II thanks for the tips though
Hey thanks for the input! A few other people just mentioned that brake pad. I'll definitely look into it. Its going to be a lot easier to clean for sure !
Could you share more about washing the car in an apartment complex? How is the water connection set-up, how does the water drain, is there a dedicated space where you wash the car, that sort of stuff? I also live in an apartment complex but mainly use rinse-less washes due to lack of water supply. Maybe I can convince my neighbors to install a water supply for car washing.
I know Apartment complex's rarely have car wash areas. Luckily, my building provides an outlet where I can connect my own hose to the building'swater supply. The area is on a slant that allows the water to flow into drain. I use ONR rinse-less wash when the car is more dusty then dirty. I know what you're going through and I know its fustrating. Hopefully you can convince them.
the fact that you have z performance wheels shows you're true beemer fan. I'm sure you watch all those cool videos on youtube where they use these wheels
Been a OG subscriber since he had his Mineral White F80. Learned a lot from His channel! Absolutely love P&S detail products. Brakebuster is my go to wheel and tire cleaner for sure.
There definitely multiple ways to wash a car, a lot of wrong ways and ways that will help / aid in preserving your car's paint. I get some people rather go to the automated car washes or cut corners, but just look at their paint. You'll be sure to see the difference. This definitely isn't for everyone 🤙
I haven't yet. Only because space is limited when living in a condo. If not I would have a pressure washer and a water filtration system. It would make cleaning the car so much easier for sure.
The Daily Driven yeh I had similar issue but the hose pipe foam guns are really good! Thanks for replying and love the content. I really want to upgrade from my M140i to the F80 M3 😊
Thank you ! I really appreciate it. It motivates me more ! I came from a 335 XI and have no regrets. It's been a lot of fun driving it. Especially in a 6 speed manual.
Why Adam polishes ? I’ve been using Ardex but I see now that a lot of people uses Adams!! FYI after watching your video I went and bought $378 worth products form Adam’s polishes... I want try to see. Thanks .
Adam's polishes has been around for quiet sometime and has a lot of experience in developing new products and solutions. I personally love a lot of their products. But I also like trying new brands and other products too. What did you end up getting ?
The Daily Driven I ended up getting the wheel cleaner, the shampoo, all the brushes, the foam gun, the spray detail, the bucket with the wheels and I pretty much got the kit for everything, I think that’s why it came up to be this much, but I’m already used to spend this kind of money in products because I was already with out everything and my truck is also ceramic coated and I ended up getting the product to treat the ceramic coating cars... I always want to try them and after watching your video I liked that way you make your videos!!!👍🏻💪🏻 I already subscribed to your channel, because I’ve been want to buy a M3 and I’ve been watching your videos!!! Cool stuff man!!
Yeah with all that you pretty much are good to go! In time your collection will grow. Funny thing is, my collection keeps on growing. Just thankful that my fiance puts up with it haha. If you ever have any questions regarding any of the products let me know. A product I like using as a drying agent is P&S Beadmaker! After a wash I spray that on the car and it's just amazing! Provides so much more gloss. You can see more of it in Spencer Berke's video (I was featured in his channel) ua-cam.com/video/MfE6JktzTxY/v-deo.html Btw thank you for subscribing. I really appreciate it. It definitely helps my channel! The M3 is going to be a game changer when you get one !
Randomly my friend and I met Zed at Super Cars Saturday in South Florida and the rest is history from there. In this video ➡️ ua-cam.com/video/gkBG2O8ckHo/v-deo.html you can see the interaction in the beginning. It took about a month to get it from Overseas.
I ended up ordering ⬇️ FR 9x20 et20 RE 10,5x20 et26 Color : Matte Gun Metal The only thing I will say is that I opted to add a 12 mm spacer in the front to get even of a flush fitment.
Its a "Foam Gun" not a Foam Cannon. Its been working just fine for over 7 years. Compared to a Foam Cannon (thats connected with a pressure washer) there's no comparison. The Foam Cannon is by far better.
Sparkling clean 🔥🔥
Thanks brother ! 🙏
Nice tips have you thought about changing the factory breaks pad to a ceramic pad, I use akebono ceramics works great no brake dust only road grime. Crazy part is did not see any loss in breaking performance of course I don't track my car and I do have 8 cars so I actually not a daily and have not had to replace pads front or rear on over 50 thousand miles of driving and I can almost just hose off my BBS powder coated RX II thanks for the tips though
Hey thanks for the input! A few other people just mentioned that brake pad. I'll definitely look into it. Its going to be a lot easier to clean for sure !
Could you share more about washing the car in an apartment complex? How is the water connection set-up, how does the water drain, is there a dedicated space where you wash the car, that sort of stuff? I also live in an apartment complex but mainly use rinse-less washes due to lack of water supply. Maybe I can convince my neighbors to install a water supply for car washing.
I know Apartment complex's rarely have car wash areas. Luckily, my building provides an outlet where I can connect my own hose to the building'swater supply. The area is on a slant that allows the water to flow into drain. I use ONR rinse-less wash when the car is more dusty then dirty. I know what you're going through and I know its fustrating. Hopefully you can convince them.
Great stuff bro! Keep up the great content
Thank you Todor! Really appreciate the positive feedback 🤘
the fact that you have z performance wheels shows you're true beemer fan. I'm sure you watch all those cool videos on youtube where they use these wheels
I actually have seen a few 😅
Z performance wheels are just NOT pretty. If you want the best go HRE.
Cool to see someone else that watches OG! You should try PnS brake buster
Been a OG subscriber since he had his Mineral White F80. Learned a lot from His channel! Absolutely love P&S detail products. Brakebuster is my go to wheel and tire cleaner for sure.
just in time with the vid
Going to keep them coming ! 🙌
How much do you bench bro? 🤣 Just kidding! Car wash process is OG approved! Would like to see a fitness video from you someday.
Haha. Thanks man I appreciate it. I'll be just documenting car related topics. Unless I run out of topics hahah
Since you have a water source, why don't you get the 40V Worx Hydroshot it will give you much more pressure than the hose.
I'll definitely look into that. Appreciate the advice 🙏
I have the same foam gun. pretty durable and easy to use. might need to get my son one. Is it still available on amazon?
Yes the foam gun is available on Amazon. I left a link in the description. Hope that helps 🤘
Are those aftermarket rims on your buddy's white beemer?
Nope they are stock M6 wheels
That’s Foam Gold!
Its relaxation for sure 👌
Do you recommend using bead maker if your car is already ceramic coated? Thanks!
Absolutely. Beadmaker has been one of the best "toppers" you can use on practically any surface. It'll provide extra shine and sheen to it.
Lot of work just 😎to wash a damn car
There definitely multiple ways to wash a car, a lot of wrong ways and ways that will help / aid in preserving your car's paint. I get some people rather go to the automated car washes or cut corners, but just look at their paint. You'll be sure to see the difference. This definitely isn't for everyone 🤙
Have you tried a snow foam Lance with pressure washer..?
I haven't yet. Only because space is limited when living in a condo. If not I would have a pressure washer and a water filtration system. It would make cleaning the car so much easier for sure.
The Daily Driven yeh I had similar issue but the hose pipe foam guns are really good! Thanks for replying and love the content. I really want to upgrade from my M140i to the F80 M3 😊
Thank you ! I really appreciate it. It motivates me more ! I came from a 335 XI and have no regrets. It's been a lot of fun driving it. Especially in a 6 speed manual.
Why Adam polishes ? I’ve been using Ardex but I see now that a lot of people uses Adams!! FYI after watching your video I went and bought $378 worth products form Adam’s polishes... I want try to see. Thanks .
Adam's polishes has been around for quiet sometime and has a lot of experience in developing new products and solutions. I personally love a lot of their products. But I also like trying new brands and other products too. What did you end up getting ?
The Daily Driven I ended up getting the wheel cleaner, the shampoo, all the brushes, the foam gun, the spray detail, the bucket with the wheels and I pretty much got the kit for everything, I think that’s why it came up to be this much, but I’m already used to spend this kind of money in products because I was already with out everything and my truck is also ceramic coated and I ended up getting the product to treat the ceramic coating cars... I always want to try them and after watching your video I liked that way you make your videos!!!👍🏻💪🏻 I already subscribed to your channel, because I’ve been want to buy a M3 and I’ve been watching your videos!!! Cool stuff man!!
Yeah with all that you pretty much are good to go! In time your collection will grow. Funny thing is, my collection keeps on growing. Just thankful that my fiance puts up with it haha. If you ever have any questions regarding any of the products let me know. A product I like using as a drying agent is P&S Beadmaker! After a wash I spray that on the car and it's just amazing! Provides so much more gloss. You can see more of it in Spencer Berke's video (I was featured in his channel)
ua-cam.com/video/MfE6JktzTxY/v-deo.html
Btw thank you for subscribing. I really appreciate it. It definitely helps my channel! The M3 is going to be a game changer when you get one !
You need a kranzle asap bro
Absolutely agree. But living in a condo, I have limited space. Eventually when I move into a house.
what do you recommend for a drying towel?
Adams polishes makes their own drying towels and I recently used Gtechniq's drying towel that was pretty good.
how did you order those rims from Europe how long did it take for you to get them
Randomly my friend and I met Zed at Super Cars Saturday in South Florida and the rest is history from there. In this video ➡️ ua-cam.com/video/gkBG2O8ckHo/v-deo.html you can see the interaction in the beginning.
It took about a month to get it from Overseas.
If you want to see Zed's vlog ➡️ ua-cam.com/video/V7e3mm0MbCo/v-deo.html
Thanks bro I saw your video what wheel specs did you order for front and rear
I ended up ordering ⬇️
FR 9x20 et20
RE 10,5x20 et26
Color : Matte Gun Metal
The only thing I will say is that I opted to add a 12 mm spacer in the front to get even of a flush fitment.
What size is ur rims an tyers?
your tires are michelin f1?
The tires are Michelin PS4
How much are those t shirts
The shirts are $24.95 on www.bmwinvasion.net I honestly think that isnt bad for a Dri-Fit tshirt. Plus it's from a established manufacturer.
wheel size??
They are 20 by 9 and 20 by 10.5
The Daily Driven thanks:) I plan on getting these in the same color for my m4 this summer
They are going to look great. You may need a slight spacer in the front if you want a flush fitment. The rears fit perfect.
Did you guys know his wheel are really dirty? Hehe
Thanks for checking out the video. Stay well 🙏
*AN old foam gun...
Thanks for the correction. I'll make the change. Also thanks for checking out the video
That's a horrible foam cannon.
Its a "Foam Gun" not a Foam Cannon. Its been working just fine for over 7 years. Compared to a Foam Cannon (thats connected with a pressure washer) there's no comparison. The Foam Cannon is by far better.
Boring
Thanks man
This guy is very egotistical.
thanks for watching