LINK TO BUY PRODUCT HUINA 1593 1593 EXCAVATOR sea.banggood.com/custlink/3vKharbmkZ OR sea.banggood.com/HuiNa-593-RTR-1-or-14-22CH-RC-Excavator-Alloy-Bucket-Vehicles-Models-p-1799400.html?p=J5222233414615202103&custlinkid=1527084 UNBOXING VIDEO ua-cam.com/video/FdKZnZc3nJw/v-deo.html
Hey man ... i been a mechanic a LONG time ... and I have NEVER seen a magnet put on a screwdriver to hold the screws quick while your working! Brilliant idea! LoL! Thank You! And thank you for the wonderful video ... I to like to pull stuff apart and see how it works :)
Very insightful video. I am definitely going to watch this again when I am adding some lead weight to mine. Now that I can see the inside of it when you took it apart, there is lots of room to add more than enough so it wont be pulling itself around the place or tipping over etc. Thanks 😎
At 9:24 you show us the slewing gear wheel that is made of plastic. Can you tell me please if this is the same one as the 1592 or the 1580 as I am having trouble with mine and I need to source a new one. Thanks in advance.
Could you please tell me, what you do with the undercarriage roller? Did you cut the base to make room after you change the roller? If yes, im interested how you cut it. Thanks. Great vid, really help me opening mine.
Looking at it in detail, I don't see the need to replace the entire system with servomotors as some do, as it is quite robust, as much or even more than with servos. Of course it has some weaknesses but they are probably in points that do not require being too strong.
Hello. Please if you can help .. I have bought a new WLToys arm, receiver and transmitter which I have fitted to my Huina 1592 with a minor mod but I'm not sure how to bind or connect the receiver to the transmitter. When I switch it all on the lights on the arm flash but nothing seems to work. It is all plug and play as far as the arm connections to the receiver board goes. Any ideas ? Thank you.
Hello, I watched a lot of your videos and subscribed to the channel! I have a question, if I wanted to put a driver inside the Huina 1593 cabin, at what scale should it be? Because the excavator does not seem to respect the scale 1/14! Continued success and please answer if you can!
i have a huina 1550. but the receiver is broken. if i just change the receiver without changing the remote, can it turn on or connect the old remote to the new receiver?
Great job! Have you understood what causes some "crick" noise when you force the two piston to the maximum strength? I fear is some teeth of some pinion/gear... and is not safe for overall durability... Can you tell us something? Thanks
@@HMGCreative I have recently bought 2 of 1593 and all of them have this problem, that is NOT the same of previous 1592 (I have two of them, even with changed pistonso from bangood). In 1593 the "crick" is really smoother, but unfortunately I fear is some gear jumping few teeths and happens in each piston of each model as you reach the the maximum strength during excavation.
@@HMGCreative can you buy it ? Because I've been looking for an upgrade version it's all in mandarin and india language which is I not understand because not have any English subtitles
Now this controller set up has been though through, by someone who knows how to operate an excavator. I have the 1580, anyone know if I can change the controls ?????
LINK TO BUY PRODUCT HUINA 1593 1593 EXCAVATOR
sea.banggood.com/custlink/3vKharbmkZ
OR
sea.banggood.com/HuiNa-593-RTR-1-or-14-22CH-RC-Excavator-Alloy-Bucket-Vehicles-Models-p-1799400.html?p=J5222233414615202103&custlinkid=1527084
UNBOXING VIDEO
ua-cam.com/video/FdKZnZc3nJw/v-deo.html
Hfk📦💸🛵gdjhw jgdj kr
Really great video! Clear and concise. One of the best I've seen. Really. I wish others would watch this and take notes. Keep up the great work!
Thank for your nice words, welcome to my channel.
Hey man ... i been a mechanic a LONG time ... and I have NEVER seen a magnet put on a screwdriver to hold the screws quick while your working! Brilliant idea! LoL! Thank You! And thank you for the wonderful video ... I to like to pull stuff apart and see how it works :)
Glad to hear that ^_^, welcome to my channel.
Ha! Ha! Same here... Goes to show you CAN teach an old dog a new trick!
A brilliant manufacturer and brilliant explained
Video nya sangat bagus, informatif
Very insightful video. I am definitely going to watch this again when I am adding some lead weight to mine. Now that I can see the inside of it when you took it apart, there is lots of room to add more than enough so it wont be pulling itself around the place or tipping over etc. Thanks 😎
I have the same kind of excavator but it is slow how can I make it fast at work
Dobrý den,chtěl jsem se zeptat,ty hnací kola pásu jsou kovové?dĕkuji Václav
At 9:24 you show us the slewing gear wheel that is made of plastic. Can you tell me please if this is the same one as the 1592 or the 1580 as I am having trouble with mine and I need to source a new one. Thanks in advance.
Thanks for the vid. Looking to upgrade mine but not sure why it makes a clicking noise when under load? Do you know why it may? Tia
An excelente explication about the mechanism
Thank you
I am happy that you made this video now i see why it costs over 200 iits well worth it
Спасибо! Очень полезная информация!
Пожалуйста
you use figure what scale put inside cabin?
Excelente video, gracias
10:44 what is that Infinite rotation called? Pls help
www.aliexpress.com/item/1005001311375894.html?spm=a2g0o.productlist.0.0.2ca415fbYo7Xcz&algo_pvid=ec28e7ee-1b66-409f-9b48-11db992b577e&algo_expid=ec28e7ee-1b66-409f-9b48-11db992b577e-0&btsid=0b0a556716201082559324273e9acc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
@@HMGCreative tHANKS YOUR MY SAVIOR
@ребенок yes
Hai,where you buy this roller?you have link?this roller what sizes?
Could you please tell me, what you do with the undercarriage roller? Did you cut the base to make room after you change the roller? If yes, im interested how you cut it. Thanks. Great vid, really help me opening mine.
I didnt cut anything, my new design roller has same dimension with old one.
Very nice 👍👍😁🤗🙏
Thank you! Cheers!
Thank you for sharing your videos
Glad you like them!
What motor is installed in drive tracks? 290 or 380.
Can i replace track drive motor with 540?
Thanks for video. It is much better then my 1570. I'm planning to convert my 1570 to Devo 10 TX for smooth handling.
Good luck!
What was tht device...which helps it to rotate infinite times
Really great video 😍 😍😍😍
ting ting 🙂🙂🙂
Compré una y no levanta el brazo que le puedo hacer ayuda
Great job my friend
Thanks for the visit, Glad it was helpful
@@HMGCreative next test the exacavator
sure, check this video
ua-cam.com/video/s0n9gmy-yjU/v-deo.html
@@HMGCreative ohhh thx
Verrey verrey thankyou soooo march bro 🥰
Which price this excavator please reply me sir🙏🙏🙏
$150 sir
Indian rupee me kitna hai
Looking at it in detail, I don't see the need to replace the entire system with servomotors as some do, as it is quite robust, as much or even more than with servos. Of course it has some weaknesses but they are probably in points that do not require being too strong.
Good all metal gears n powerful motors it's well made
Facts..that's all I'm worried about having metal gears..no gears should be plastic its absurd..
Hello.
Please if you can help ..
I have bought a new WLToys arm, receiver and transmitter which I have fitted to my Huina 1592 with a minor mod but I'm not sure how to bind or connect the receiver to the transmitter.
When I switch it all on the lights on the arm flash but nothing seems to work.
It is all plug and play as far as the arm connections to the receiver board goes.
Any ideas ?
Thank you.
Great job friend👍
Thank You.
You are great and very creative.
Thank you
RC Huina cool broo...
THANK YOU
Hello! Would you share the 3d file for the track roller? Thank you
Thanks for video
Is 1953 use servo ? 1952 has gear
👍💪 strong stable better than huina 592 .
that's right
Good job.
Thank you! Cheers!
Very nice
Is it possible to replace plastic cogs etc in a 1550 and put aluminium cogs to make it a stronger machine?
I dont own 1550, so Im not sure will it fit
Hello, I watched a lot of your videos and subscribed to the channel! I have a question, if I wanted to put a driver inside the Huina 1593 cabin, at what scale should it be? Because the excavator does not seem to respect the scale 1/14! Continued success and please answer if you can!
Thank you, 10cm driver will fit perfect in the cabin.
@@HMGCreativeok, thanks, the conductor in your video, what scale is it?
Where did you get the rollers to improve the tracks? Thanks.
3d printed
@@HMGCreative Ok, thanks 👍
Cho em mot con may muc bao nhieu 2tram
Good 👍
Thanks
I like it 👍👍
THANK YOU
Cool 👍
Thank you so much.
can you do the 1594?
Wow your creation is amazing. I love it. I've completed a cultivator science project. You see.
That is awesome!
Good job brother .👍
Thank you so much 😀
You can put a powerful battery on excavator to have more play time ?
You need a bigger and more powerful battery to able to play longer.
Hi Bro, I want to upgrade to 6 channels for infinite rotation, You can advise me on spec?
HI bro, Im Việt Nam 😂😂😂
@@HMGCreative Good job . :d
@@HMGCreative Giao lưu đi bro
nick bác là gì?
@@HMGCreative zalo nhé: 0354308391
Assalam bang, batry boleh pakai double x? Ade efect x
Please comment in English, I don't understand what you are saying.
About what scale should the excavator driver be?
10cm is good
Nice video
Thanks
i have a huina 1550. but the receiver is broken. if i just change the receiver without changing the remote, can it turn on or connect the old remote to the new receiver?
it should work
Interesting to look inside and see metal gears but the rest is made out of cheese
That's right
Great job!
Have you understood what causes some "crick" noise when you force the two piston to the maximum strength?
I fear is some teeth of some pinion/gear... and is not safe for overall durability...
Can you tell us something?
Thanks
The crick sound only existed on HUINA 1592, this HUINA 1593 fixed this problem.
I think HUINA 1593 is durable except motors, they using all 3-6v small DC motor but replace them is easy job.
@@HMGCreative I have recently bought 2 of 1593 and all of them have this problem, that is NOT the same of previous 1592 (I have two of them, even with changed pistonso from bangood).
In 1593 the "crick" is really smoother, but unfortunately I fear is some gear jumping few teeths and happens in each piston of each model as you reach the the maximum strength during excavation.
I will do a hard digging on tomorrow to find the problem you mention, I will reply you soon.
@@HMGCreative Could you please tell the problem is fixed or not? If yes, how?
Mst bro 👌
Thanks 🤗
Thanks.
Nice
Good video 😊
Thanks 😁
Nice amazing
Thank you so much 😀
See eska kit lie mileage nam kya hai
My haiuna dont go on atfer this pls help
after what friend?
@@HMGCreative its ok it works now 👍thanks
Orr jg sos🥰🤣
Can you make a video for 592 disassembly ?
I don't own HUINA 592
@@HMGCreative can you buy it ? Because I've been looking for an upgrade version it's all in mandarin and india language which is I not understand because not have any English subtitles
@@arulacik4317 I think it almost same as this HUINA 1593 except arm driving motor.
Вовсе не хуйня, нормальный экскаватор)
С пластиковыми шестернями в редукторе гусениц всё-же хуйня.
Voshe huynya.Shinema huynya.
Circuit diagram of receiver and transmitter please
Goods
Great job
Thank you
Now this controller set up has been though through, by someone who knows how to operate an excavator.
I have the 1580, anyone know if I can change the controls ?????
If you want to control this excavator with another Transmiter, so you need to change all electronics on it (new esc,new receiver, ...)
@@HMGCreative thank you.
Review Upgrade track metal
ok, thats a must upgrade
Is The 1593 the same as the 1592?
A lot of differents, wish I have 1592 so I can dissasembly them to compare, but I saw a lot of differents, HUINA 1593 more better.
Now is it possible to run metal tracks
Yes, It can.
Superbe 😃😉
THANK YOU ^_^
Uuuo
only 4 rollers on the bottom tracks are far from enough.
Sensacional
Amazing
Thanks
😍😍😍😍
The gear is METAL on the bottom of the main arm....that is the most stressed part, impossible to make it out of plastic.
👍👍👍👍👍👍
I managed to mount the driver and lights on the excavator! Thanks! youtube.com/@cataere5012
Dissasembly huina 1580 please
I don't own huina 1580, will take apart it if I got one later, welcome to my channel.
ATA ki Bangladesh's pawajabe
Wow
1:14
Price Kiti aahe hi chi
Buy link in the description.
bang coba reviu rc jutaan bang nanti ti saya like dan suskereb
ok, saya akan mencoba yang terbaik
Brasil🚜👏👍
😘😘😘😘☺️🥰🥰🥰🥰
👍👍👍👍🥰👍🥰
Thank you
Worth to buy or not?
It worth the money, really cheap.
@@HMGCreative Thank you Sir. Easier for me to make a decision for this very nice machine that I could categorize it semi hobby level.
Price?
Check description
regalarme la bocina que sacaste de la excavadora
Price
Check description
disasembry 1594 1980 1583 1569 1582 all
Bro Kitna price hai iska
👍👍👍👍👍👍👍✈✈✈✈✈✈
Знали бы вы как это звучит на русском...