*Construction seemed sturdier than other units I considered **MyBest.Tools** Noise level was reasonable. Good pressure and cfm capacity for a small reasonably light compressor.*
@@galaxyman9941 True... But as I learned today, you definitely want to relieve as much of the pressure as you can from the actual pressure relief valve at the top of the unit...first. Why you ask? Water. Everywhere...
*This does exactly what I was wanting **MyBest.Tools** Price was fantastic, lower than Harbor Freight-and it included hose and attachments, and IT IS MADE IN AMERICA, unlike Harbor Freight*
Great video. I bought this compressor after seeing your other video. I don't like the regulator either, because it seems to have a significant pressure drop when using a higher volume tool. When I use my impact it drops ~20 psig. I've seen some people connect different regulators and connectors right off the other side of the pressure switch (there is a plug in it right now). Keep up the good work.
Glad you enjoyed the video and thanks for subscribing! You're spot on about the pressure drop. The whole idea is that a pressure regulator *maintains* pressure while the compressor is off with an open line and when the compressor is on and recovering- right? Well this setup is registering a drop *while running,* so your first instinct is to adjust the regulator while the line is open, right? Doing this has still produced inconsistent / sometimes scattered output. There's some great information on forums out there, will put something else on (higher CFM rated regulator) and see how it goes. Hopefully it solves both of our problems! Cheers Bill
Bought one today its ridiculously quiet. Only downfall is no shut off valve to the lines. The lines are always pressurized if you leave them connected. Its definitely worth the $249. If I get 2 years out of it for that price I'd be a happy camper.
Its $379 at lowes. I bought mine for $240 from a friend who had only used it twice so its basically brand new. Still had the plastic cover it came with out of the box.
I have this model. Having trouble with it not re-pressurizing after it empties. Have to open bottom valve to release ALL pressure, then unplug/plug electrical to get it to put pressure back in... EVERY TIME.
Ok, I think I have a work-around. When the compressor reaches full pressure and automatically shuts off, within a minute or two walk over and cycle the on off switch to off until all of the pressure is relieved. Then place it back to the on position. Now when you hit your low pressure threshold it will automatically kick back on again. It worked for me today like that all day.
Same here. I returned the first one I got because the motor would stall when the tank was partially pressurized. The second one seemed better at first, for about a month, and now it's doing the same stupid thing. Too late to return it, and since other people are having the same problem, I bet there isn't an easy fix. And yes, it's a 20A outlet without other loads running.
I bought this compressor maybe about six months ago and all of a sudden I try to click it on and it won’t run it’s like a hit or miss sometimes it runs and sometimes it doesn’t it was a waste of $250
Hello, I need some help. So when I turn the tank on, the air will build up in the tank just fine. But I’m having a problem with not having any tool pressure. Is there something that I’m not doing right? How do I fix this?
Hey just wanted to say i think this was a really great video and well worth it. Thank you so much.. i am in the market for purchase and was just wondering any updates? Any additional pros or cons regarding this unit? For me, I was looking at this unit, and the HF Fortress 27gal high performance, and the HF Fortress 26 ultra quiet version for comparisons. I see that the HF 27gal is in the upwards of 459.00 in my area, the HF 26gal is 299.99, and right now the Kobalt is 339.00. In addition though, the kobalt by default has a 3yr warranty where as the HF has 90 days before spending extra on extended warranty. As for my usage. Im looking to do some paint spraying HLVP for some woodworking. My husky gun advises 27gal minimum 4.5 SCFM at 90psi. Whats your opinion on compressor ? And do you have a link for that air filtration M30 ? All advise is greatly appreciated.
Thanks for the excellent video and sharing your experiences with the compressor. This is on my short list for purchase. I'm also considering the Husky 30 gallon oil-free compressor and looking at a few California Air Tools models. I've had variable experiences with both Kobalt and Husky power tools over the years - mostly QC issues or a sub-standard component. Seems that there's always some cost cutting that isn't obvious - like the regulator.
Kenneth Shaw Hello did you purchase a compressor? I was looking at those California Air type units. One that had a bigger tank and 2 horsepower motor with 6 cfm. I checked Silent Air out. It looks cheesy compared to the Husky unit. Did you purchase anyone of those. Thanks Joe
Did you have an issue with getting the air hose fitting into the quick connect coupler on the compressor? I purchased 1/4" fittings and they seem like they're too large to go into the couplers. The outer sleeve on the coupler is stuck in the down position which I'm used to them being in the up position.
I took close looks at the display models of this compressor, a Dewalt, and the Husky 30 gallon C303H. I bought the Husky at Home Depot for $289 and am very pleased with it. I posted a 4/5 star review on the HD site due to a few out of the box minor issues. The Kobalt was a very close second. The deal breaker was what looks like a 1/8" inlet/supply into the bottom of the pressure regulator. There is a short piece of 1/4" ID pipe from the tank that tapers to 1/8" ID just as it enters the regulator. Could you confirm this? This may be the restriction that limits the air volume and causes a pressure drop as demand exceeds the restricted supply. The regulator looks typical of those on this size compressor. However, the internals are hidden. It is an integral part of the metal manifold, and I didn't observe that the rear of the regulator was plastic. Build quality on the Kobalt was impressive. The Husky has a 1/4" ID supply into the regulator and operates at 175 PSi. This tipped the scales for me. Also, repair parts availability for the Kobalt may be a challenge if you need parts for the compressor, motor or regulator. Opinions? Source? The Lowes approach seems to be to buy the extended warranty, and they will replace the whole unit. Parts for the Husky are readily available from several sources. Same motor, regulator and motor components as the 33 gallon Craftsman and Campbell Hausfeld models. I did buy the extended warranty from HD, but it is a repair plan rather than replacement. Hopefully, we both have good luck with longevity of our compressors. Again, thanks for your review.
I bought the Husky one yesterday at Home Depot for $309 because my Lowes didn't have the Kobalt one in stock. When I got the Husky home and took it out of the box, the bracket holding one of the wheels was bent causing it to hit the tank. I probably could have straightened it out but I knew they had another in stock so I exchanged it this morning. At lunch, I drove by the Lowes and they actually did have one in stock and a sign saying it was on sale for $279. So I bought that one too. Now I can compare them side by side. Each has advantages in the specs over the other. I didn't buy an extended warranty on either. The Husky has a 2 year warranty and the Kobalt has a 3 year. I'm really interested in the sound level as the videos online are all over the place.
@@Lankston21 Here is a short video comparison of the sound of them. ua-cam.com/video/1u23m7QhTUE/v-deo.html I ended up keeping the Kobalt and it has been great. It recovered faster and it was quieter with a less harsh sound. Even more of a difference than my phone camera produced in the video. I know it's a smaller capacity and lower pressure and that helps with the recovery time, but it seemed more efficient at running. The smaller diameter also fit the spot it was going much better. It was $40 cheaper than the Husky with a longer warranty. I piped air around my shop using Rapid Air 1/2 tubing.
Ive had mine for a little over 2 years. Something is wrong with the regulator and it keeps bleeding off air if the tool pressure is set to over 75 psi. Trying to see about warranty but keep getting run around. EDIT............Spoke with Kobalt Customer Service they are going to send me a replacement regulator but I had to pay $23 for it. Part # is TAVA01.RE.22
Mine did the same. Wouldn't come on after the air ran down. I returned it for a replacement thinking it was defective. Now the second one is doing the same thing. Used both of them exactly once.
@@maxgilbert18i think i figured out what it is. the wall outlet we are using doesn't have enuf amperage. After connecting mine to a outlet closer to the main breaker box its fine.
@@MrRickTic Maybe so but I plugged mine in about 3 or 4 different outlets and it didn't work. The idiots that wired my buddies garage put the outlets on 30 amp breakers so I don't think mine was a power problem. I doubt they are on 10ga wires though.
You should warn your viewers that you are using occasional profanity throughout your review. I stopped listening about halfway through. Simply no need for the foul language.
*After years of hauling around a large,💫 **allabout.wiki/PORTER** heavy, loud dewalt air compressor (that ironically was advertised as quiet, supposedly 78dB), I bought this. Facepalm. While it is not ‘silent’, I find myself chuckling every time I use it, sparing all my neighbors the terror of my former compressor. I use for inflating tires, impact wrench, finish nailers. Absolutely love it. And I store it under the garage sink in a 24” cabinet. I paired with a coil 1/2”, instead of a my former 50’ 5/8” hose that I had to lug across the yard from the shed, unpleasantly uncoil.... this little guy is light and portable; just a joy. Impact wrench is still capable of easing lug bolts, flywheel bolts, crank pulleys... just allow for a tiny bit of recovery now and then.*
*Construction seemed sturdier than other units I considered **MyBest.Tools** Noise level was reasonable. Good pressure and cfm capacity for a small reasonably light compressor.*
@0:58 The ball valve on the bottom is not to "relieve pressure" it is your moisture removal valve. Just an FYI there...
Can be used to relieve pressure
It's a drain valve, for air and water lol.
@@galaxyman9941 True... But as I learned today, you definitely want to relieve as much of the pressure as you can from the actual pressure relief valve at the top of the unit...first. Why you ask? Water. Everywhere...
*This does exactly what I was wanting **MyBest.Tools** Price was fantastic, lower than Harbor Freight-and it included hose and attachments, and IT IS MADE IN AMERICA, unlike Harbor Freight*
Great video. I bought this compressor after seeing your other video.
I don't like the regulator either, because it seems to have a significant pressure drop when using a higher volume tool. When I use my impact it drops ~20 psig.
I've seen some people connect different regulators and connectors right off the other side of the pressure switch (there is a plug in it right now).
Keep up the good work.
Glad you enjoyed the video and thanks for subscribing! You're spot on about the pressure drop. The whole idea is that a pressure regulator *maintains* pressure while the compressor is off with an open line and when the compressor is on and recovering- right? Well this setup is registering a drop *while running,* so your first instinct is to adjust the regulator while the line is open, right? Doing this has still produced inconsistent / sometimes scattered output.
There's some great information on forums out there, will put something else on (higher CFM rated regulator) and see how it goes. Hopefully it solves both of our problems!
Cheers Bill
Shop Talk thanks for the video, can you send the link please
Bought one today its ridiculously quiet. Only downfall is no shut off valve to the lines. The lines are always pressurized if you leave them connected. Its definitely worth the $249. If I get 2 years out of it for that price I'd be a happy camper.
I added an air drier/filter between the pressure manifold and the switch unit, and also added a ball valve there.
any word on the regulator holding up or an upgrade?
Its $379 at lowes. I bought mine for $240 from a friend who had only used it twice so its basically brand new. Still had the plastic cover it came with out of the box.
Is there special air fittings i need to attach my lines to the quick connect fittings? The ones im using on my other compressor wont work
Good honest review 👍🏽
I have this model. Having trouble with it not re-pressurizing after it empties. Have to open bottom valve to release ALL pressure, then unplug/plug electrical to get it to put pressure back in... EVERY TIME.
Mine is the same...
Thanks for your comments...
Mine too
Ok, I think I have a work-around. When the compressor reaches full pressure and automatically shuts off, within a minute or two walk over and cycle the on off switch to off until all of the pressure is relieved. Then place it back to the on position. Now when you hit your low pressure threshold it will automatically kick back on again. It worked for me today like that all day.
Do you have it in a 20amp circuit?
Same here. I returned the first one I got because the motor would stall when the tank was partially pressurized. The second one seemed better at first, for about a month, and now it's doing the same stupid thing. Too late to return it, and since other people are having the same problem, I bet there isn't an easy fix. And yes, it's a 20A outlet without other loads running.
do you have to let all the air out of the tank before you can turn it back on after it sits for a day? thanks
I bought this compressor maybe about six months ago and all of a sudden I try to click it on and it won’t run it’s like a hit or miss sometimes it runs and sometimes it doesn’t it was a waste of $250
The motor needs a better outlet. It is high amperage.
Hello, I need some help. So when I turn the tank on, the air will build up in the tank just fine. But I’m having a problem with not having any tool pressure. Is there something that I’m not doing right? How do I fix this?
how long does this motorguard filter last? How do you know that it does not remove moisture from the air anymore?
They have this one for $298 and lowes...they have a 20 gal for $179. That's the one im leaning to buy
Did you find a regulator for this compressor? Have you had any trouble out of it?
What is the duty cycle of this compressor? I can’t find it anywhere. How long should you wait between cycling?
I usually feel it, I wanna say 60% any more than 6 minutes every 10 minutes it starts to get hot enough to make a guy worry
Prefect fucking video 🚀🚀
I am interested in how you mounted that M30 filter. Would you please share that?
Would you know where the serial number on kobalt 26 gal. quiet tech air compressor are?
Marvelous !
What size motor guard m30 did you attach? I'm seeing 3 sizes available on Amazon. Great video! Thanks for sharing your insight.
I had the same question. The specifications on the machine show a 1/4" fitting size so I'm just ordering the 1/4" M30... and hope it works.
@@Wil_Bloodworth is it the right size? 1/4" fitting size?
Thinking about buying one. Is it still holding up well?
Have you ever had to replace the capacitor?
nice review but sticking with oil lubricated, cant brung myself to electrical
How does it handle a brake bleeder?
Hey just wanted to say i think this was a really great video and well worth it. Thank you so much.. i am in the market for purchase and was just wondering any updates? Any additional pros or cons regarding this unit? For me, I was looking at this unit, and the HF Fortress 27gal high performance, and the HF Fortress 26 ultra quiet version for comparisons. I see that the HF 27gal is in the upwards of 459.00 in my area, the HF 26gal is 299.99, and right now the Kobalt is 339.00. In addition though, the kobalt by default has a 3yr warranty where as the HF has 90 days before spending extra on extended warranty. As for my usage. Im looking to do some paint spraying HLVP for some woodworking. My husky gun advises 27gal minimum 4.5 SCFM at 90psi. Whats your opinion on compressor ? And do you have a link for that air filtration M30 ? All advise is greatly appreciated.
Does your tank stay at 150? Mine stops at 145 then drops and settles on 140. Is this normal?
Air is heated when it's ran through the compressor, as it cools the pressure drops.
did you ever find that regulator? mine went bad and I need another.
Part # is TAVA01.RE.22
Nice house bro
Thanks for the excellent video and sharing your experiences with the compressor. This is on my short list for purchase. I'm also considering the Husky 30 gallon oil-free compressor and looking at a few California Air Tools models. I've had variable experiences with both Kobalt and Husky power tools over the years - mostly QC issues or a sub-standard component. Seems that there's always some cost cutting that isn't obvious - like the regulator.
Kenneth Shaw Hello did you purchase a compressor? I was looking at those California Air type units. One that had a bigger tank and 2 horsepower motor with 6 cfm. I checked Silent Air out. It looks cheesy compared to the Husky unit. Did you purchase anyone of those. Thanks Joe
Did you have an issue with getting the air hose fitting into the quick connect coupler on the compressor? I purchased 1/4" fittings and they seem like they're too large to go into the couplers. The outer sleeve on the coupler is stuck in the down position which I'm used to them being in the up position.
Have you used a HVLP spray gun on this yet. Looking for one that can handle this but about this size
me too have you found one?
Rodder Files I have not really looked yet. I have my buddies 60 gallon right now but once he gets back from Kuwait next year it will be gone.
HVLP use almost 15CFM. This tank only make 5CFM. You do the math.
I took close looks at the display models of this compressor, a Dewalt, and the Husky 30 gallon C303H. I bought the Husky at Home Depot for $289 and am very pleased with it. I posted a 4/5 star review on the HD site due to a few out of the box minor issues. The Kobalt was a very close second. The deal breaker was what looks like a 1/8" inlet/supply into the bottom of the pressure regulator. There is a short piece of 1/4" ID pipe from the tank that tapers to 1/8" ID just as it enters the regulator. Could you confirm this? This may be the restriction that limits the air volume and causes a pressure drop as demand exceeds the restricted supply. The regulator looks typical of those on this size compressor. However, the internals are hidden. It is an integral part of the metal manifold, and I didn't observe that the rear of the regulator was plastic. Build quality on the Kobalt was impressive. The Husky has a 1/4" ID supply into the regulator and operates at 175 PSi. This tipped the scales for me.
Also, repair parts availability for the Kobalt may be a challenge if you need parts for the compressor, motor or regulator. Opinions? Source? The Lowes approach seems to be to buy the extended warranty, and they will replace the whole unit. Parts for the Husky are readily available from several sources. Same motor, regulator and motor components as the 33 gallon Craftsman and Campbell Hausfeld models. I did buy the extended warranty from HD, but it is a repair plan rather than replacement. Hopefully, we both have good luck with longevity of our compressors. Again, thanks for your review.
I bought the Husky one yesterday at Home Depot for $309 because my Lowes didn't have the Kobalt one in stock. When I got the Husky home and took it out of the box, the bracket holding one of the wheels was bent causing it to hit the tank. I probably could have straightened it out but I knew they had another in stock so I exchanged it this morning. At lunch, I drove by the Lowes and they actually did have one in stock and a sign saying it was on sale for $279. So I bought that one too. Now I can compare them side by side. Each has advantages in the specs over the other. I didn't buy an extended warranty on either. The Husky has a 2 year warranty and the Kobalt has a 3 year. I'm really interested in the sound level as the videos online are all over the place.
@@nicksgarage2 Nick, would you do a video comparing both those models? I'm also stuck on which to buy between the Husky and Kobalt. Thanks!
@@Lankston21 Here is a short video comparison of the sound of them.
ua-cam.com/video/1u23m7QhTUE/v-deo.html
I ended up keeping the Kobalt and it has been great. It recovered faster and it was quieter with a less harsh sound. Even more of a difference than my phone camera produced in the video. I know it's a smaller capacity and lower pressure and that helps with the recovery time, but it seemed more efficient at running. The smaller diameter also fit the spot it was going much better. It was $40 cheaper than the Husky with a longer warranty. I piped air around my shop using Rapid Air 1/2 tubing.
Ive had mine for a little over 2 years. Something is wrong with the regulator and it keeps bleeding off air if the tool pressure is set to over 75 psi. Trying to see about warranty but keep getting run around. EDIT............Spoke with Kobalt Customer Service they are going to send me a replacement regulator but I had to pay $23 for it. Part # is TAVA01.RE.22
Mine is doing the same thing. Tryin to find a replacement
@@BradFizer I was able to get a hold of Kobalt support and they are sending me a regulator assembly but I had to pay $23 for it.
@@atxjax1 do you have a part number? My just started leaking last night. I’ve had it for a few years now.
@@BradFizer Don't have the part number just yet but once I get my package I will see what the paperwork has and share it here.
@@atxjax1 if you would please. I need to order one and can’t find it anywhere
If anyone here has the compressor can you please tell me what the specs are on the original capacitor
It sounds like a louder version of a refrigerator compressor. I'm sure they are using similar technology.
I just bought one and its already acting up. It struggles to startup even when at low PSI and sometimes not at all. Sometimes it wont do anything.
Mine did the same. Wouldn't come on after the air ran down. I returned it for a replacement thinking it was defective. Now the second one is doing the same thing. Used both of them exactly once.
Mine is doing the same I just got mine yesterday and it already stopped working
@@jonathanscottpenny I took mine back and got my money back after leaving it plugged up for multiple days and it still not recharging.
@@maxgilbert18i think i figured out what it is. the wall outlet we are using doesn't have enuf amperage. After connecting mine to a outlet closer to the main breaker box its fine.
@@MrRickTic Maybe so but I plugged mine in about 3 or 4 different outlets and it didn't work. The idiots that wired my buddies garage put the outlets on 30 amp breakers so I don't think mine was a power problem. I doubt they are on 10ga wires though.
awesome video, what's the dimensions on this unit?
Man, this compressor is $349.99 at Lowes now.
That's what ijust paid an hour ago
@@MrRedex88 379 at lowes right now
@@chrisl9529
Ridiculous how things are going up, by a lot too.
I wonder how this compressor is doing?
same, I want to buy but also want to see a long term review
anything on that
regulator yet ?
regulator on mine is leaking air now. unit is 3 months old
good thing it has a 3 year warranty
Love your vids. Also have a youtube channel
your house is messy af
You mean it’s quieter when you go in the house and shut the door?
mannnnnnn that is NOT quiet... my doggy, jumped of the mat and started to bark up a storm!
First words out of your mouth with the foul language. Bye
California air tools cheap knockoff
Maybe. But it comes with a 3 year warranty vs 1 year from CAT.
a knock off of a good brand and cheaper? will work for me
You should warn your viewers that you are using occasional profanity throughout your review. I stopped listening about halfway through. Simply no need for the foul language.
That was the first word out of his mouth.
If you dont cuss in a garage you're not using it right
Snowflake.
Gonna cry?
Lmao!!! Snowflake
*After years of hauling around a large,💫 **allabout.wiki/PORTER** heavy, loud dewalt air compressor (that ironically was advertised as quiet, supposedly 78dB), I bought this. Facepalm. While it is not ‘silent’, I find myself chuckling every time I use it, sparing all my neighbors the terror of my former compressor. I use for inflating tires, impact wrench, finish nailers. Absolutely love it. And I store it under the garage sink in a 24” cabinet. I paired with a coil 1/2”, instead of a my former 50’ 5/8” hose that I had to lug across the yard from the shed, unpleasantly uncoil.... this little guy is light and portable; just a joy. Impact wrench is still capable of easing lug bolts, flywheel bolts, crank pulleys... just allow for a tiny bit of recovery now and then.*