It's super cool although I have a (stupid) question... At the beginning you use a straw to make the hole in the base of the lamp. Then after you use clay to make a tube and put the wire. Why not use... the straw ?
Really cool! I wish you could have shown more detail about how you connected the led light and got it to work, but I really like this. Love the effect when the lights are out and the lamp is turned on. Is it operated by switch or you just have it hooked up to a battery all the time?
thanks for the info - yeah, i think for really smart people this wiring seems like a no brainer, but i haven't a clue what kind of resistor or where to buy and all that. i've never wired anything before, but willing to fail (aka learn). i really want to do lighting in my dollhouse for various things. i think i will need switches for all the lights i want to put in - then i can build a storage place under the house to keep all the battery packs and just use the switches to turn things on and off.
amazing I thought you were a professional with fimo and the hot glue is better than soldering accessible for everyone and cheap thanks for the tutorial
If you used a number 1 knitting needle and wrapped the polymer clay around it and baked it, while still warm slip the knitting needle out and you will have a tube in which to slide the wires down just a thought I have the Sculpy clay tube makers for the extruder and they come in 3 hole tube sizes I think the smallest is 1mm while the largest is either 3 or 3.5 mm I can not remember but as to the tube size that depends on the hole disc that you use from the extruder kit or you could use the square or triangle rather than the round one just to give it a different look 🤗😹 I loved the fact that you added in how you made the bulb I have been wondering how this was done thank you will have to look at where I can buy the led light and resisters for it 😹🤗
***** thanks 🤗 I was lucky enough to find a company in the next town from me who had what I need and they even have a guy who will help me learn how to wire up a doll house along with the lamps and putting in little power points for everything so I am really pleased 😹 considering I went in there for batteries for my power out lamp 😹😹
Wooow mega! Das sieht am Ende ja richtig gemütlich aus! :D Nur eine Frage hätte ich: wo kann man so einen Miniresitor kaufen? Oder wurde der einfach von wo entnommen?
Wahsinns Fummelarbeit - Meinen Respekt dafür :O Kleiner Tipp: Ab 4:16 Min überschneidet sich die Musik etwas - ist aber nicht weiter tragisch :P Aber klasse, dass ihr bald auf die 1000 Abos kommt - ich weiß noch wie die ganze Idee hier gestartet ist. Weiter so & liebe Grüße
Love this can I get the supplies list for making the shade please?
I guess the ignoramus never responded! These people who do poor tutorials should be...well...punished for this crap!
It's super cool although I have a (stupid) question... At the beginning you use a straw to make the hole in the base of the lamp. Then after you use clay to make a tube and put the wire. Why not use... the straw ?
Because you can change the size and it looks better
Really cool! I wish you could have shown more detail about how you connected the led light and got it to work, but I really like this. Love the effect when the lights are out and the lamp is turned on. Is it operated by switch or you just have it hooked up to a battery all the time?
thanks for the info - yeah, i think for really smart people this wiring seems like a no brainer, but i haven't a clue what kind of resistor or where to buy and all that. i've never wired anything before, but willing to fail (aka learn). i really want to do lighting in my dollhouse for various things. i think i will need switches for all the lights i want to put in - then i can build a storage place under the house to keep all the battery packs and just use the switches to turn things on and off.
amazing I thought you were a professional with fimo and the hot glue is better than soldering accessible for everyone and cheap thanks for the tutorial
Yes please make a video about the wiring of the led. Do you have one i have been looking everywhere.
If you used a number 1 knitting needle and wrapped the polymer clay around it and baked it, while still warm slip the knitting needle out and you will have a tube in which to slide the wires down just a thought I have the Sculpy clay tube makers for the extruder and they come in 3 hole tube sizes I think the smallest is 1mm while the largest is either 3 or 3.5 mm I can not remember but as to the tube size that depends on the hole disc that you use from the extruder kit or you could use the square or triangle rather than the round one just to give it a different look 🤗😹
I loved the fact that you added in how you made the bulb I have been wondering how this was done thank you will have to look at where I can buy the led light and resisters for it 😹🤗
***** thanks 🤗 I was lucky enough to find a company in the next town from me who had what I need and they even have a guy who will help me learn how to wire up a doll house along with the lamps and putting in little power points for everything so I am really pleased 😹 considering I went in there for batteries for my power out lamp 😹😹
***** your welcome just glad I was able to contribute something that was helpful🤗
Just found the channel. Great tutorial!
how to buy that little led lamp?
Hi mini diy I was wondering, do you do stopmotions with all these mini doll rooms and furniture?
Can you list the supplies for the electrical part of the lamp please and thank you
I Love your lamp! Thanks. Now to seek if his works for an ametuer.
I try but it's not working
i love anything like this !!!!!!😱😱😱😱😱😱😍😍😍😍
Your videos are the best dude
Soooooooooooooooooooooooooooooooooooooooooooooooooooooooooo cute I love it
love this idea
What's the thing you use to connect to the wire at 3:52?
What how did you do that that's so creative
SOOOOO COOL YOU ARE A GENIUS
Plz can you tell what ingredients is used in ..?
Me
What size is the SMD RESISTOR?
Wooow mega! Das sieht am Ende ja richtig gemütlich aus! :D Nur eine Frage hätte ich: wo kann man so einen Miniresitor kaufen? Oder wurde der einfach von wo entnommen?
Okay danke für die Info ^^
Cool
Your work is awesome niceeeeeeeeeee
So smart 😚😚
Ótima idéia
Thank you! This is just what I needed.
Geil! Du kannst Lichter machen 😍!
Wahsinns Fummelarbeit - Meinen Respekt dafür :O
Kleiner Tipp: Ab 4:16 Min überschneidet sich die Musik etwas - ist aber nicht weiter tragisch :P
Aber klasse, dass ihr bald auf die 1000 Abos kommt - ich weiß noch wie die ganze Idee hier gestartet ist.
Weiter so & liebe Grüße
What's the name of the song?
Wowwww😲
Прикольно придумано! )))
русский !!
Omg!
wow
👍👍👍👍😍😍😍
wow dis ist gut! ich liebe dich!!!!😚😚😚😚😚😚😚😚😚
miniDIY
Hey kein problem ich liebe deine vids
miniDIY kein Problem!!!!!❤❤❤
I just subscribed to you. 👍❤
legal
ich packe schon mal mein koffer und fahre los und ziehe den dort ein
hammer mäßige arbeit
miniDIY oh ja bitte mit kuschliger decke
miniDIY uiii klasse idee
this is so cool but i wan you to make chair please
miniDIY yes, can it?
miniDIY okey thankyou minidiy , the best chnnel of miniatures :D
тут не понятнр
Check out Aira tran
I heard about woodprix good opinions.
Get rid of that annoying music and tell us what you are doing - it goes to fast.
You must be crazy! I'm just a kid and you're using these materials please tell me your joking.
Geil! Du kannst Lichter machen 😍!