G30 - Return to second reference position G30 is an optional feature and may not be included on your machines. It works much like G28, except the ending position is now definable through parameter settings. G30 is often used when a machine tool builder must define a special position in each axis, such as with pallet changers on machining centers. The zero return position may not make a good pallet-change position, so the builder may incorporate a second reference position for X and Y. Then, a G30 command is given when a pallet change is required:
Sir aap bhut aacha smjhta hai vmc mai offset kysa li jti dekhya
Bahut bahut achhi jankari diye sir ji 🙏
Thank u 😊
In Fanuc you can use M99 with Sequence number.
Like Sequence number is N2 thn just type M99 P2 (for N2)... wherevr you want to skip your program.
Sir fanuc controler me hum line par kaise jaye kya hame edit mode me jane ke bad line par jaye
G30 - Return to second reference position
G30 is an optional feature and may not be included on your machines. It works much like G28, except the ending position is now definable through parameter settings. G30 is often used when a machine tool builder must define a special position in each axis, such as with pallet changers on machining centers. The zero return position may not make a good pallet-change position, so the builder may incorporate a second reference position for X and Y. Then, a G30 command is given when a pallet change is required:
Right
Sir mitsubishi control me bataye
Hii fanus or haas controller may difference kya hai aur konsa better hai
G30-Long circular interpolation -CCW
Nice 🤣
Paractical video banaao sir
Ye practical video hi to h😂
@@cnctalks 😂😂😅
G30 - 2nd,3rd,4th axis reference returns
Siemens controller but how in fanuc cintrol
Simply go to that line, press auto and press cycle start.
Machine will automatically run from that line.
G30 2nd, 3rd, 4th reference point return
Right
Are you taking online classes
No.. Sorry
Kaise pata karenge Kahan Tak chal chuka hai?
Vmc me beech se kaise chalate hai
Bro... Vdo ko poora dekho... Isme yhi smjhaya h ki vmc program beech m se kaise chlana.
Block no bhul gye to?