i used it to charge a 36v lithion battery, so at 42v and 2 Ampere out , i was using 18v and 6 amps on input. Problems begin if you set the boost converter to charge with more amps 3-4 for example at 42v ..it will draw like 8-10 amps out of the power supply, and if the power supply cant take it it will drop voltage under 8v and go maximum amps..the the buck coverter will spike at 100v. is a good converter but be carefull so the power supply doesnt go below 8v. I recomend a PC psu as it has lots o power
Sir is it advisable po ba? Meron kasi akong 12v 400w in 30m run sa load pero nag drop to 8v.. Thinking ko po kung pwd to gamitin to boost the end before load
i used it to charge a 36v lithion battery, so at 42v and 2 Ampere out , i was using 18v and 6 amps on input. Problems begin if you set the boost converter to charge with more amps 3-4 for example at 42v ..it will draw like 8-10 amps out of the power supply, and if the power supply cant take it it will drop voltage under 8v and go maximum amps..the the buck coverter will spike at 100v. is a good converter but be carefull so the power supply doesnt go below 8v. I recomend a PC psu as it has lots o power
You put digital Voltage indicator only. Better if dual ammeter+voltage reader.
They say the voltage comes out was spiky. Or not clean dc
I added this to the psu, the psu turned off for battery charging. 14.4v 8a needed for battery , why did this happen
Can i use 5 volt in input
QUE MODELO ES EL MODULO STEP UP
Ambil inputnya dari psu trafo rakitan bisa itu ya gan?..
Dan apakah tetap setabil?
Hi which ic used for this controller
uc3843a and strs204sct
Kannst du auch schpreschen???
Whats value of Potentiometers
Pwede poba jan 5 volts input at 12 volts output?
no min 8 v
kahit ilang ampere yung 12v adapter kkayanin?
automatic cut off ?
gagana na ang 48v poe comfast access point?
Good
thank you
@@nerzaelectronics7474 भाई कोई ऐसा बुस्ट कनवर्टर है जो एम्पेयर भी बढाये
Sir tanong ko lna kung hindi ba maaapektuhan Yong comfast pag sinet sa 50 plus ung voltage ng converter?
hindi naman po kasi sa loob ng poe injector may regulator pa po yan..
@@nerzaelectronics7474 salamat sa sagot sir..
Sir is it advisable po ba? Meron kasi akong 12v 400w in 30m run sa load pero nag drop to 8v.. Thinking ko po kung pwd to gamitin to boost the end before load
Itne zyada voltages?
ini video maksudnya apa ?
Dragging video
Halo
??
a nao vei vsfd o cara soldando o fio ao inves de colocar nos bornes
Hindi maintindihan