Nice engine half covers looks awesome nice job....I contacted Steve white they sent me a link to order from with all the "5.7" half covers they have available....going to order them appreciate the vid....subbed 👍👍
You clearly care a lot about your engine bay, and that's awsome I won't be getting this as I already have a dress up kit but none the less it does look nice!
Looks great man. I agree about the Volant intake and the stock I take being a good system. Like the way those are doctored up. Good to see a video from ya. Hope all is well.
Hey bud I bought the same covers for my 2015 Chrysler 300s and my covers fit perfectly flush with a tiny bit of tweaking the diver side I had to grind the front plastic nipple and it all looks factory now 👍🏽 if you have any questions reach out and I’ll tell you what I did to make them a secure fit and factory look ... once again thank you for your video 👍🏽
I'm thinking the setup is similar. Check out www.stevewhiteparts.com They have different parts for all the different models. I dont want to mislead you.
New subscriber here, so I have a stock R/T mostly (nothing mechanically done) but if I have and continue to use the stock air intake would the half covers work? I plan on getting a catch soon also
@@RydinNStyle awesome thanks man! Loved the video! Very informative and instructional. I want to do the half covers on my 2020 R/T I think it will look great alike yours! And thanks for the speedy reply on such an old video
Rydin N Style... Your makeshift breather filter does not "work better"....It was designed to be connected to the airbox...therefore it was designed to work properly under vacuum....The way you now have it set up there is nothing pulling the air out of the engine and it will just slowly clog up ....The smarter option would be to connect it to the new airbox...restoring the vacuum needed to operate the Positive Crankcase Ventilation the way Chrysler (and all other car makers) designed it....
I want to put a sniper hood on my charger but they have all the vent holes open to engine compartment anyone have any suggestions on how to not water damage the engine but still keep the look
That hose suppose to go in the attachment clearly next to the breather filter you used maybe you knew that and the hose couldn't go in there with the cover on
Nice set up! Looking great man! Keep the videos rolling, inspiration for all R/T owners!
Thanks Zane, we could meet up soon
Alright sounds good, let me know when’s a good time for you, I need some advice and opinions on my build, just lmk
Nice engine half covers looks awesome nice job....I contacted Steve white they sent me a link to order from with all the "5.7" half covers they have available....going to order them appreciate the vid....subbed 👍👍
Awesome, thank you
Where can I purchase the half covers
You clearly care a lot about your engine bay, and that's awsome I won't be getting this as I already have a dress up kit but none the less it does look nice!
Thanks Derek!
You should do voices for a Home Depot commercial or something 😂
Haha, maybe I'll look into it 🤔
I'm fuggen dead lol
Looks great man. I agree about the Volant intake and the stock I take being a good system. Like the way those are doctored up. Good to see a video from ya. Hope all is well.
Thank you burnsey's, all is well here on this side of the pond. Hope you're doing well there in that winter wonderland
I have a JLT intake series 2 on my rt and for some reason my covers won’t fit !
Great video by the way.
Thank you
Nice man! Good to see you!
Thanks, I need to start recording again
John Cena called and what's his voice back!
Hey from New Orleans.....We own a 2010 SRT8 Challenger and a 2014 SXT Challenger...any ideas where I can find some goodies for same?
Www.stevewhiteparts.com or billetechnology could be a Start. Be careful, it gets addicting lol
Where did you buy the red stripes?
A kit on ebay or Amazon
where’d you buy these half covers ? know this videos so old i just got my first charger🤣
Check out www.stevewhiteparts.com
What's up Rydin always looking good.
Thanks Orlando, much appreciated brother
Car looking good 👍🏼😍😍
Thank you
Instead of using the 18mm crankcase breather will a 12mm work the same?
Yes, that should work, it'll just be a bit smaller and possibly more restricted
where can i buy the half cover ??
Check out www.stevewhiteparts.com
Hey bud I bought the same covers for my 2015 Chrysler 300s and my covers fit perfectly flush with a tiny bit of tweaking the diver side I had to grind the front plastic nipple and it all looks factory now 👍🏽 if you have any questions reach out and I’ll tell you what I did to make them a secure fit and factory look ... once again thank you for your video 👍🏽
Jr Seda I just ordered my covers. What areas did you have to grind down
The tab on the front of the drivers side
Bumper front? Or firewall front?
Bumper front
@@CrunchTyme if you like i can send you pictures or video if you like
Do you have any idea if these would fit on my 2012 durango 5.7 hemi? Same motor so I'm assuming. Just not sure.
I'm thinking the setup is similar. Check out www.stevewhiteparts.com
They have different parts for all the different models. I dont want to mislead you.
@@RydinNStyle appreciate the response. Thank you
where did you get your filter from? I am trying to find one
in blue?
18mm breather filter bought on ebay
3/4" heater hose will work. A couple dollars a foot.
where did you buy this at
www.stevewhiteparts.com
New subscriber here, so I have a stock R/T mostly (nothing mechanically done) but if I have and continue to use the stock air intake would the half covers work? I plan on getting a catch soon also
Yes, it should work, I regret putting an after market closed box since the stock one is already a closed box
@@RydinNStyle awesome thanks man! Loved the video! Very informative and instructional. I want to do the half covers on my 2020 R/T I think it will look great alike yours! And thanks for the speedy reply on such an old video
This video helped alot! one question, where did you get your oil catch can in front? does it come with the bracket?
I got it from billet technologies, the z bracket was an extra cost but necessary with the engine half covers
You seem like you would be a cop😂
Haha, very interesting
😂😂😂 or at least military
Rydin N Style...
Your makeshift breather filter does not "work better"....It was designed to be connected to the airbox...therefore it was designed to work properly under vacuum....The way you now have it set up there is nothing pulling the air out of the engine and it will just slowly clog up ....The smarter option would be to connect it to the new airbox...restoring the vacuum needed to operate the Positive Crankcase Ventilation the way Chrysler (and all other car makers) designed it....
Ok
Those half covers look great on your Challenger. Will they work with a Shaker? if so I wonder what problems I would run into during installation.
Ooh great question, I'm not sure on the configuration of the shaker
@@RydinNStyle same as 5.7 just a big snout on top of engine lol
Where did you get those from ?
Here's the link on where to go and how to buy them, I got the red decals on Amazon or Ebay
ua-cam.com/video/tlDL4EtG6OA/v-deo.html
Will these work on a 2006 charger r/t?
I'm not 100% sure, check out www.stevewhiteparts.com to see
I want to put a sniper hood on my charger but they have all the vent holes open to engine compartment anyone have any suggestions on how to not water damage the engine but still keep the look
did you mean viper hood? If so, I have an aftermarket viper style hood from BMC on my charger and there's no water damage.
So where do we buy it
I found it on ebay
Nice
Thank you sir
Hey bro will this work on my 6.1 ?
Yes it will
Rydin N Style thank you I’ll look in to it , want to spruce up my Jeep
Hi, What year is your Charger ?
2015
Where did you buy them from
www.stevewhiteparts.com
Will this fit 2019 hemi engine?
Yes it will, I might be selling my engine half covers too
I’m about to order some, why are going to sell yours
Trading in my car and put the stock cover back on
I'm going to make a video soon on how and where to order them from
Rydin N Style from Steve white the place in NC
That hose suppose to go in the attachment clearly next to the breather filter you used maybe you knew that and the hose couldn't go in there with the cover on
Yes, I put a different air box and the hose wouldnt work with it or the half covers
YOU SERIOUSLY DON'T SEE THE BREATHER TUBE FITTING COMING OUT OF YOUR CAI? IT'S LITERALLY RIGHT NEXT TO YOUR BREATHER TUBE.
Hmmm, did I miss it
Will work for 2017 Dodge Durango r/ t
It should, I think the engines are the same
I cut those pegs off on both of them and it set completely flush.
Such a cleaner look
Haven't I seen this video posted before? Like three times.
I've posted an installation video before, but I get a ton of questions from new viewers/subscribers who havent seen that older video.
I love the first cover you had on!! Where did you get it??
How’s it going brotha
Pretty good bro, there's another local brotha on this comment thread. We gotta schedule a meet up
Rydin N Style hell yeah man! Sounds good hope everything’s going well!
Can I get it at Dodge
The parts department should be able to help you out, but some aren't so helpful.
www.stevewhiteparts.com
This work Dodge Durango r/t
Im.pretty sure it's the same engine components for the R/T or 392, so it should fit
@@RydinNStyle finally got it work for my Dodge Durango
@@sarahromero7376 are you happy with the new look?
@@RydinNStyle yes for being one first do it I can send you picture if I can get email
@@sarahromero7376 nice, t2zaq@yahoo.com
I like the original better
They both have their appeals
We’re did you get these?
Check out www.stevewhiteparts.com