RG Full Armor Unicorn Gundam Review Time Stamp :D Intro: 0:00 Initial Thoughts: 00:34 Details 1:46 Articulation 6:43 Destroy Mode Details 10:27 Weapons 13:24 Final Thoughts 18:47 ps Great Video loved the in between pose transitions and i praise that you gave your all into this review and your full on opinion on this kit
You may have noticed I skipped some things near the end of the video like putting all the equipment on the Unicorn. To be frank, I was fed up with messing with the kit. After two days of filming, getting everything right, I just wanted to be done. So after I filmed the weapons, I just jumped to my final thoughts. I hope you all still enjoyed it and don't worry. The quality will go up.
@@goro5479 Gundam Meli is still starting out in the review game. as a reviewer I think Krow is still better. i'd say they are pretty even on building skill though but I think Krow has a few years on her in that regard
That's fair enough, I have the banshee and I find keeping the armed armor XC(the back pakc main like thing to replace beam sabers) thing is super loose, so I have to keep pushing them down, coudln't imagine that same thing, except for literally every part of the kit
@@TheKrowSama One of the reasons why I think the HG Full armor is better because it has the ability for the shields be on a base and has the ability to combine into the giant shield while the rg is the only full armor that cant combine the shields for some reason.
you're not wrong for pointing out all those "issues" though I feel when compared to all the other Unicorn kits, this one is the "sturdiest" and can hold its poses well. for the shoulder joint, you gotta mess with that lil section on the edge that rotates to fully close the shoulder bits or to have 'em opened properly. same goes for the chest, you gotta mess with the shoulder connection a bit to close the chest section fully flush. It IS a marathon build so i can see why you feel this way. overall, apart from the shoulder joint, everything else seems fine to me and hey, a lil bit of glue goes a long way too lol. Now, If you'd excuse me, There's diarrhea to clean up.
I have to admit the RG Unicorn in itself, upon seeing just how gorgeous it is, is what made me want to dive in to the RG line; despite my fears due to the various horror stories from other builders. I can only wonder, though, if the stability issue would be a different story had it had the mini-MG frame the RG Crossbone had instead of the pre-built ones the RG line is (in)famous for. Nevertheless, once I have built a few more RG’s, I’m getting just the regular Unicorn.
For me the RG Unicorn is by and far the best RG I've built. It's sturdy, never falls apart, joints are tight but not too tight, poses really well transforms smoothly. So maybe it's just me, or maybe you've just gotten really bad luck. The RG Unicorn was my first kit but I don't think that I have rose tinted glasses for it. The thing has fallon off my display shelf multiple times and the worst thing thats happened is the beam magnum magazine falls off.
ForgedHorizons I’m thinking of buying this kit, do you still have yours? Does it still hold up after 9 months? It will be my 4th kit but my first real grade.
Very nice and honest review! Was considering getting this kit in a while and now finally I can decide. For me enjoying the build process is important so thanks a lot for sharing out how it is!
I totally understand your tireness. Usually I just care for the MS, once I get to the extras I start to get bored and try to rush it. I would by this one just for the green psycho-frame. (I do realize that I just left 3 comments. I'll finish watching the video before commenting next time.)
Kept this hobby for 10 years now, actually stopped for some time, but the fucking RG sazabi just had to bring me back the gunpla rabbit hole. I'll probably get this at one point, but saving for the Nu Gundam now after buying the RG crossbone. Well, guess this is better than buying drugs and clubbing like other college scrubs my age.
I don't know what you're talking about. aside from the one joint in the shoulders being prone to breaking, (i broke 3 over 2 kits) and the bazzuka ammo clip falling out, this is one of the most stable rg there is. though gotta agree about the build, on the fa the weapons just seemed to take bloody forever, the mg was so much more of a grind to do tho so maybe having built that made this build more bearable
I'm not sure if it would work but it should help. If u glue around the joints to thicken them and then re attach them so there is a stronger connection it will stop stuff falling off. Sorry if that was what u were on about when u said glue it
Might build the weapons first then the unicorn to not experience any anti climatic of building it. This will be my 3rd RG unicorn if I manage to get one.
Great video! May I know what that stand is? I'm new to Gunpla and I finished my first build (standard RG Unicorn) a few weeks back. Mine was pretty solid. The shoulders closed properly and no loose parts on the figure itself. The only loose items would be the Bazooka's clip and shield attachment to the arm. Nothing a tiny dab of Blue Tack didn't fix. Overall I enjoyed the build enough to buy the RG FA Unicorn and Banshee Norn. I'm starting the Norn first when my weather clears up. Cheers!
Due to lack of availability at the time, the only full armor unicorn I could get was the assault kingdom version. Although not as beautiful or as gimmicky as the rg, it is very fun to play with and pose. Nice review though!
i think almost all unicorns rg and mg is really a pain in the arse to build (unicorn, banshee, i havent build phenex yet i want that gold plate tho), some are stable and some aren't. I have an MG Banshee ver Ka, and it took me almost 3 months to build because i'm busy and my skills are still lacking, it is a pain in the arse up until the point of top coating it. especially transforming it is really frustrating, that vents on the shoulder in my kits were really loose and i have to unplug it from there and just leave it hollow. But dont get me wrong, Unicorn kits are godamn awesome and are really really beautiful if you finished it, and i can fairly say it's an okay if you're not messing with the kit too much and just leave it be as a model kit (doesn't moving it that much). loving your reviews btw!
@@TheKrowSama thanks and also how did you apply that green glitter to the green pyscho frame. I got the same one as you but just dont know how to apply it
The building process is similar to the mg so I was kind of confused when people say its really good barely any flaws. Thanks for pointing that out, you're the only one saying it out loud about the issues
I just started this, and I can already feel the "not fun" aspect. My personal problem is if I don't finish a kit fast enough, I start to get tired of it. I need that sense of accomplishment, a finish line every so often. I tend to hop onto an hg build when that feeling starts to set in. Quick snap, panel line, top coat, and I get my dopamine along with knocking a box off the backlog.
Badass review, mighty ambitious to pose with each weapon after talking about it I could definitely see getting burnt out after doing that but as a UA-camr I really enjoyed it. But seriously what stand is that!? That final pose was phenomenal
hmm, I have the hg version, should I get this? I always regret my decision of getting the HG version of this kit and the psycho zaku (I bought both on sale, buy one get one free). I am thinking to buy rg unicorn full armor and mg psycho zaku, but I don't want duplicate in my shelf..
I'd say personally if you don't care much for the fa pack buy the og one but the rg unicorn is much better than the mg or the hg so I'd say go for it if you like the design
Just use a little bluetak, as with my experience with framearms, which some are also hand grenades, a little bluetak can be a great alternative to gluing things together and ruining the customizablity of the kit
@@TheKrowSama yeah. I kinda wanted to hear your thoughts about it before I go ahead and build mine, but going by this review I figured you probably got tired of the Unicorn RG, you just skipped it.
@@DarkROSkull013 I'm a firm believer on taking reviewers opinions with a grain of salt. I may not have had a great experience with the RG Unicorn, but dont let that stop you from picking up any variant. You may have the best build experience of a lifetime. As for me, I learned my lesson with the shoulder joint, so I can go into the banshee with a better outlook.
@@TheKrowSama You know, I was debating on which version to pick, or if I had to get one at all. I figured since I had both the Sinanju and the Norn, I should get a Unicorn too. The FA looks cool, but I dont really want to build the same parts thrice. The regular version is a bit vanilla, so I'll probably get the Bandee Desinee. I'll end up having 2 of the large shields, but I'll probably just scratch build something to make it unique. Don't worry about your opinions offending anybody; that's the point of reviews in the first place. At least people know what they're getting into beforehand. I personally like it, since its very informative.
Yes, but I don't think you can use any of the weapons, if you have the FA unicorn HG you can mix mashed it but some of the plug or connectors need to be change or modified
well,tbh shoulders have always been the Achilles' knees for Real grades. You should definitely check out the RG 00 kits though. maybe start with the Qan T, because i've heard a lot of people say it's one of the simplest RG to build.
I had the same problem with this kit's shoulder. It broke at the point where you connect the pre-made shoulder arm with the socket (it was those v-shaped sockets on runner B i think). The other part that often fell off were the knee armor and feet armor plating. I had to glue some of those parts. But, overall. it was a bit stable for me.
When a model kit has so many accessories with multiples of the same piece, build the accessories first! Once you've done this tedious portion of the build the actual model itself will be refreshing and so much more fun. We've all been there. It's too bad this version left a bit of a sour taste in your mouth but it is a good kit. So when the RG Nu Gundam releases try building the accessories first cause those funnels are gonna be a chore [well maybe not as much as the FA Unicorn but it's up there]. Great review.
Funny thing is, I've built the MG FA Unicorn and I didn't feel the same way as I did with the RG. You don't have to worry about me and the RG Nu though. I've built two Nu Gundams already and I LOVE dem funnels.
This must have took a looooong time to complete, especially if you smooth out nubmarks and paint parts. I really want this but thinking about the build time makes want to forego this kit.
Building same multiple weapons made you worn out huh? That aside, very good decal placement, plus minor paint-touches, and huge weapons. Very beautiful kit! Great Job.
@@TheKrowSama My guess is, it has to do when building smaller parts and causes eye-fatigue might drain down your energy. Happens to my experience in reading small letters sometimes strain abit of the eye-muscles. It's best to take a break when feeling tired.
I'm glad it's not just me, I got the banshee, and the crotch piece, the cheeks, the thighs, and the big mane attached where the bean sabers to be, all fall apart whenever I try to change poses, but once the pose is set, its stable.
I feel that most of us praise this kit because we compare it to the mg, which is an absolute piece of shit, I love it, it was my first kit, but goddamn compared to the mg, the rg is perfection
Can this kit hold a pose and look spectacular? Yes Do I want to pose it? No That sums up the RG Unicorn line. They're hand grenades and desperately want to blow up especially anything to do with the shoulders and arms. I find that you pretty much have to work out a pose with all the Shields and backpack off and then reassemble the FA. There's no way to safely move the arms with the huge shield and gatling guns on them
RG Banshee Norn is garbage too, the head falls off, the shoulders explode, skirt pieces pop off by breathing on them, the inner shin psycho plates dont deploy without the thruster bell section popping out. Worst $45 I've spent on Gunpla.
RG Full Armor Unicorn Gundam Review Time Stamp :D
Intro: 0:00
Initial Thoughts: 00:34
Details 1:46
Articulation 6:43
Destroy Mode Details 10:27
Weapons 13:24
Final Thoughts 18:47
ps Great Video loved the in between pose transitions and i praise that you gave your all into this review and your full on opinion on this kit
I need to start doing these time stamps lol. Thanks for that.
You may have noticed I skipped some things near the end of the video like putting all the equipment on the Unicorn. To be frank, I was fed up with messing with the kit. After two days of filming, getting everything right, I just wanted to be done. So after I filmed the weapons, I just jumped to my final thoughts. I hope you all still enjoyed it and don't worry. The quality will go up.
Unless you can grow a wicked pair of funbags you'll never top Gundam Meli aka Gundam MELONS!!!! She has 6 times your subs
@@maxaryan100 ok, I don't know how that's relevant to what I said.
Ben Dover not sure if you know the difference between quality content, and plain ol sex appeal.
@@goro5479 Gundam Meli is still starting out in the review game. as a reviewer I think Krow is still better. i'd say they are pretty even on building skill though but I think Krow has a few years on her in that regard
That's fair enough, I have the banshee and I find keeping the armed armor XC(the back pakc main like thing to replace beam sabers) thing is super loose, so I have to keep pushing them down, coudln't imagine that same thing, except for literally every part of the kit
With rewatching my video, I say "good" way too much. I'll post more adjectives next to my review station for reference from now on lol.
TheKrowSama I like to make a drinking game every time mechagaiketsu says “Absolutely” and “amazing” respectively
@@101amuro and "utterly"
Oh man o would be silly after just one video lol . Mad love krow-sama
@@TheKrowSama One of the reasons why I think the HG Full armor is better because it has the ability for the shields be on a base and has the ability to combine into the giant shield while the rg is the only full armor that cant combine the shields for some reason.
This review started to make me wanna start posing my rg unicorn cause of all those poses look better than any of mine
you're not wrong for pointing out all those "issues" though I feel when compared to all the other Unicorn kits, this one is the "sturdiest" and can hold its poses well. for the shoulder joint, you gotta mess with that lil section on the edge that rotates to fully close the shoulder bits or to have 'em opened properly. same goes for the chest, you gotta mess with the shoulder connection a bit to close the chest section fully flush. It IS a marathon build so i can see why you feel this way. overall, apart from the shoulder joint, everything else seems fine to me and hey, a lil bit of glue goes a long way too lol.
Now, If you'd excuse me, There's diarrhea to clean up.
I have to admit the RG Unicorn in itself, upon seeing just how gorgeous it is, is what made me want to dive in to the RG line; despite my fears due to the various horror stories from other builders.
I can only wonder, though, if the stability issue would be a different story had it had the mini-MG frame the RG Crossbone had instead of the pre-built ones the RG line is (in)famous for.
Nevertheless, once I have built a few more RG’s, I’m getting just the regular Unicorn.
For me the RG Unicorn is by and far the best RG I've built. It's sturdy, never falls apart, joints are tight but not too tight, poses really well transforms smoothly. So maybe it's just me, or maybe you've just gotten really bad luck. The RG Unicorn was my first kit but I don't think that I have rose tinted glasses for it. The thing has fallon off my display shelf multiple times and the worst thing thats happened is the beam magnum magazine falls off.
ForgedHorizons I’m thinking of buying this kit, do you still have yours? Does it still hold up after 9 months? It will be my 4th kit but my first real grade.
Get some rest Krowsama, sometimes some kits can make a person feel or have a bit of a burnout. Enjoy your rest good sir.
Where did you buy the stand because I wanna do the thing where the shields are flying
Really liking that green psycho-frame. Nice work!
I built the same Gundam, and I enjoyed building it . I loved it.
Very nice and honest review! Was considering getting this kit in a while and now finally I can decide. For me enjoying the build process is important so thanks a lot for sharing out how it is!
I totally understand your tireness. Usually I just care for the MS, once I get to the extras I start to get bored and try to rush it. I would by this one just for the green psycho-frame.
(I do realize that I just left 3 comments. I'll finish watching the video before commenting next time.)
Kept this hobby for 10 years now, actually stopped for some time, but the fucking RG sazabi just had to bring me back the gunpla rabbit hole. I'll probably get this at one point, but saving for the Nu Gundam now after buying the RG crossbone. Well, guess this is better than buying drugs and clubbing like other college scrubs my age.
Looks definitely better than the universe unicorn gundam.
Great Job!!
I don't know what you're talking about. aside from the one joint in the shoulders being prone to breaking, (i broke 3 over 2 kits) and the bazzuka ammo clip falling out, this is one of the most stable rg there is. though gotta agree about the build, on the fa the weapons just seemed to take bloody forever, the mg was so much more of a grind to do tho so maybe having built that made this build more bearable
Will i have issues during transformation if i paint the clear parts?
Planning to paint the white and grey parts for sure
I'm not sure if it would work but it should help. If u glue around the joints to thicken them and then re attach them so there is a stronger connection it will stop stuff falling off. Sorry if that was what u were on about when u said glue it
Might build the weapons first then the unicorn to not experience any anti climatic of building it. This will be my 3rd RG unicorn if I manage to get one.
Great video!
May I know what that stand is?
I'm new to Gunpla and I finished my first build (standard RG Unicorn) a few weeks back. Mine was pretty solid. The shoulders closed properly and no loose parts on the figure itself. The only loose items would be the Bazooka's clip and shield attachment to the arm. Nothing a tiny dab of Blue Tack didn't fix.
Overall I enjoyed the build enough to buy the RG FA Unicorn and Banshee Norn. I'm starting the Norn first when my weather clears up.
Cheers!
Kotobukiya flying stand
how much do you apply on it ?
Where'd you get the stand and the pieces to it!?
where did you buy the shield stand？
Where do you get the stand with shield looks like flying in the final pose?
Due to lack of availability at the time, the only full armor unicorn I could get was the assault kingdom version. Although not as beautiful or as gimmicky as the rg, it is very fun to play with and pose. Nice review though!
i think almost all unicorns rg and mg is really a pain in the arse to build (unicorn, banshee, i havent build phenex yet i want that gold plate tho), some are stable and some aren't. I have an MG Banshee ver Ka, and it took me almost 3 months to build because i'm busy and my skills are still lacking, it is a pain in the arse up until the point of top coating it. especially transforming it is really frustrating, that vents on the shoulder in my kits were really loose and i have to unplug it from there and just leave it hollow. But dont get me wrong, Unicorn kits are godamn awesome and are really really beautiful if you finished it, and i can fairly say it's an okay if you're not messing with the kit too much and just leave it be as a model kit (doesn't moving it that much). loving your reviews btw!
I personally have 5 MG unicorns built and the only real problem is the stability in destroy mode and posing. Everything else is fine.
@@TheKrowSama yup, you just gotta be really careful with those kits.
Great review, thanks Crow for your honesty keep it up
Man, really enjoy the transition stamp, really helpfull
Where did you get that action base for shields flying love it
It's a Kotobukiya flying base
@@TheKrowSama thanks and also how did you apply that green glitter to the green pyscho frame. I got the same one as you but just dont know how to apply it
Hi, where did you buy the effect parts for the base? Do you have a link where I can get one of those? Thanks Krowsama!
I dont have a link, but it's the Kotobukiya type a stand
The building process is similar to the mg so I was kind of confused when people say its really good barely any flaws.
Thanks for pointing that out, you're the only one saying it out loud about the issues
I don't sugarcoat. That's evident in the amount of dislikes on the video lol
anyone know what base he is using?
I can't find anything on the net
Finally this kit looks so good
I just started this, and I can already feel the "not fun" aspect. My personal problem is if I don't finish a kit fast enough, I start to get tired of it. I need that sense of accomplishment, a finish line every so often. I tend to hop onto an hg build when that feeling starts to set in. Quick snap, panel line, top coat, and I get my dopamine along with knocking a box off the backlog.
Wow ... I've just seen this VDO.
Ahhhh.. I love that action base. I've tried a lot to find it. Finally, I've found it in ebay.
Where do you get the base that the unicorn is on at 20:00? And what is it called?
The playing base from kotobukiya.
TheKrowSama great, thank you krow, also love your channel, I know I’ve said this before but I’ll say it again, keep up the good work 👍
Badass review, mighty ambitious to pose with each weapon after talking about it I could definitely see getting burnt out after doing that but as a UA-camr I really enjoyed it. But seriously what stand is that!? That final pose was phenomenal
The stand is playing base by kotobukiya
Thank you krowsama for this
hmm, I have the hg version, should I get this? I always regret my decision of getting the HG version of this kit and the psycho zaku (I bought both on sale, buy one get one free). I am thinking to buy rg unicorn full armor and mg psycho zaku, but I don't want duplicate in my shelf..
I'd say personally if you don't care much for the fa pack buy the og one but the rg unicorn is much better than the mg or the hg so I'd say go for it if you like the design
Just use a little bluetak, as with my experience with framearms, which some are also hand grenades, a little bluetak can be a great alternative to gluing things together and ruining the customizablity of the kit
HOLY-- this is the 2nd model kit I made and yeah.. It's really hard. Sooo many runners 😳
I cant find your RG Norn review, only the unboxing. Did you get to build it?
Nah, I never got around to it. I was going to paint it and just got lazy.
@@TheKrowSama yeah. I kinda wanted to hear your thoughts about it before I go ahead and build mine, but going by this review I figured you probably got tired of the Unicorn RG, you just skipped it.
@@DarkROSkull013 I'm a firm believer on taking reviewers opinions with a grain of salt. I may not have had a great experience with the RG Unicorn, but dont let that stop you from picking up any variant. You may have the best build experience of a lifetime. As for me, I learned my lesson with the shoulder joint, so I can go into the banshee with a better outlook.
@@TheKrowSama You know, I was debating on which version to pick, or if I had to get one at all. I figured since I had both the Sinanju and the Norn, I should get a Unicorn too. The FA looks cool, but I dont really want to build the same parts thrice. The regular version is a bit vanilla, so I'll probably get the Bandee Desinee. I'll end up having 2 of the large shields, but I'll probably just scratch build something to make it unique.
Don't worry about your opinions offending anybody; that's the point of reviews in the first place. At least people know what they're getting into beforehand. I personally like it, since its very informative.
then. can you modify it with the hg version?
just plug the joint part to hg
Yes, but I don't think you can use any of the weapons, if you have the FA unicorn HG you can mix mashed it but some of the plug or connectors need to be change or modified
where do you find an action base like that? for weapon shield
I also wanted to know that.
well,tbh shoulders have always been the Achilles' knees for Real grades. You should definitely check out the RG 00 kits though. maybe start with the Qan T, because i've heard a lot of people say it's one of the simplest RG to build.
I do have the rg full saber I can build. Maybe next month?
@@TheKrowSama ooh.nice. I've been looking for reviews on the full saber version of the Qan T.
I had the same problem with this kit's shoulder. It broke at the point where you connect the pre-made shoulder arm with the socket (it was those v-shaped sockets on runner B i think). The other part that often fell off were the knee armor and feet armor plating. I had to glue some of those parts. But, overall. it was a bit stable for me.
What's your Action base you use
My RG is already all loose and and I broke the 3 circle piece that connecting the arm and the body for transformation.
What’s the name action base that’s cool I want one
Sounds a lot like the MG. I also plan to glue the panels fixes open and the super loose pieces(non transforming) that just fall off for no reason.
i love the RG unicorn but yeah the shoulders are a pain in the ass
When a model kit has so many accessories with multiples of the same piece, build the accessories first! Once you've done this tedious portion of the build the actual model itself will be refreshing and so much more fun. We've all been there. It's too bad this version left a bit of a sour taste in your mouth but it is a good kit. So when the RG Nu Gundam releases try building the accessories first cause those funnels are gonna be a chore [well maybe not as much as the FA Unicorn but it's up there]. Great review.
Funny thing is, I've built the MG FA Unicorn and I didn't feel the same way as I did with the RG. You don't have to worry about me and the RG Nu though. I've built two Nu Gundams already and I LOVE dem funnels.
What's the action base you used in? 19:09
Playing base
totally agree, got the banshee and the finish product is amazing. But the building process is a chore. Totally not enjoying it
How you get that action base
what kind of base is the one used at the end? looks amazing
Playing base by kotobukiya
@@TheKrowSama thanks, and the claws grabbing the shield are part of the playing base as well?
This must have took a looooong time to complete, especially if you smooth out nubmarks and paint parts. I really want this but thinking about the build time makes want to forego this kit.
Building same multiple weapons made you worn out huh?
That aside, very good decal placement, plus minor paint-touches, and huge weapons. Very beautiful kit! Great Job.
I've built the MG FA Unicorn and didn't feel the same I did with this kit. Maybe my mind wasn't in the right place?
@@TheKrowSama My guess is, it has to do when building smaller parts and causes eye-fatigue might drain down your energy. Happens to my experience in reading small letters sometimes strain abit of the eye-muscles. It's best to take a break when feeling tired.
Tell me, are the horror stories about the shoulder and other parts of the frame true?
100%
Loved the action base in 18:48! Is it custom made?
It's the playing base from kotobukiya
Where did I u buy the stand?
Edion in Japan
I'm glad it's not just me, I got the banshee, and the crotch piece, the cheeks, the thighs, and the big mane attached where the bean sabers to be, all fall apart whenever I try to change poses, but once the pose is set, its stable.
I also broke the arm, specifically the right arm bicep cut
Its too tight for me,broke the psycho frame on the shield
I have to say the same I’ve built this kit along with the banshees they’re so finicky and while they’re gorgeous they do have some issues
What base u use?
Anywhere from bandai stage, figma, and Kotobukiya playing base.
lololol "hand-grenade" is certainly a right term for it (thanks a lot banshee for giving me a pain in the ass)
what action base is that ?
Playing base
thanks krow!
Thanks Krow :)
does it come with this base?
It does not
Ill just wait for the Red Psychoframe release of this so I can use it alongside the Bande Desinee.
You missed out a spot on the backpack. Theres a tiny tab that flips out
Yeah, I flipped it out later in the review
Cool
THIS KIT IS G O O D
Is it just me, or do the RG Unicorn mold's shoulders look WAY too disproportionately large?
8:17 Ooooooooaaaaaagh....did anyone else get super nervous looking at that? >.
my opinion of this kit plummets when the leg pegs broke on me twice
Oof
Pain in the ass to build but over all an awesome kit if not a little to tight
I feel that most of us praise this kit because we compare it to the mg, which is an absolute piece of shit, I love it, it was my first kit, but goddamn compared to the mg, the rg is perfection
Since this was my first ever Unicorn, I had an absolute blast building it.
HATED the FA weapons though. Like, six gatling guns, really? SIX???
Yeas
Can this kit hold a pose and look spectacular? Yes
Do I want to pose it? No
That sums up the RG Unicorn line. They're hand grenades and desperately want to blow up especially anything to do with the shoulders and arms. I find that you pretty much have to work out a pose with all the Shields and backpack off and then reassemble the FA. There's no way to safely move the arms with the huge shield and gatling guns on them
And yes.. I broke the arms
Of thats rough buddy
Still it's a beautiful kit
Definitely
RG Banshee Norn is garbage too, the head falls off, the shoulders explode, skirt pieces pop off by breathing on them, the inner shin psycho plates dont deploy without the thruster bell section popping out. Worst $45 I've spent on Gunpla.
still，stable than MG
Pilot-less unicorn more like rider-less unicorn am I rite?