Should have 100V FETs and 100V capacitors. 84V = 100.8V (12V charging at 14.4v each battery, or 24S lithium @ 4.2V max each) hot off the charge. And probably 2 little skinny copper bus-bars on the top of the board, rather than fat lines of solder on the bottom...or as well as. Have a look while you're inside and see if there's anything you can jumper to enable regen braking. I've done that successfully on a few controllers.
still that doesnt mean that your bike is the fastest ive seen quite a few at the ebike drags that are faster than most cars and using 120 voltwith 20p of 45 amp molie cells ..they accessing up to 900 dc amps those cells youve using have a very high weight compared to the power they are able to supply
keep your eyes out soon for alot of new motor technology comming through too ,they are making combined axial flux and radial flux motors with focused cpi; halbach arrays for bikes
👀👌🏴
Right on, dang, it's powerful. Thanks for sharing.
will be half the weight and 20 times the power
Should have 100V FETs and 100V capacitors. 84V = 100.8V (12V charging at 14.4v each battery, or 24S lithium @ 4.2V max each) hot off the charge. And probably 2 little skinny copper bus-bars on the top of the board, rather than fat lines of solder on the bottom...or as well as.
Have a look while you're inside and see if there's anything you can jumper to enable regen braking. I've done that successfully on a few controllers.
@@stubby7934 hi buddy wow allsome stuff yip I'll do that and I'll try make a video . biggest thanks 😊👍🦇🌟🎉 from cruzermans inventions 😁🎉
Did you use any sensor to this alternator
How do you know its the fastest ever bike with an altinator conversion for a motor,
Because no is faster than me on you tube 😂
still that doesnt mean that your bike is the fastest ive seen quite a few at the ebike drags that are faster than most cars and using 120 voltwith 20p of 45 amp molie cells ..they accessing up to 900 dc amps those cells youve using have a very high weight compared to the power they are able to supply
keep your eyes out soon for alot of new motor technology comming through too ,they are making combined axial flux and radial flux motors with focused cpi; halbach arrays for bikes