Check whether the fuse is present. If not, then insert it. Code this option back, put new sensors into the wheels and they will pair automatically and calibrate after a drive. I think I had to make around 10km or so. The car will tell you what to do.
⚙️ Spare parts used:
🔹Control unit: 36 10 6 881 433 - 1pcs
🔹Control unit's bracket: 36 13 6 796 534 - 1pcs
🔹Plastic nut M6: 1 61 31 176 747 - 2 pcs
🔹Wheel electronic sensor: 36 10 6 890 964 - 4pcs
🔹Screw-in valve: 36 14 6 792 829 - 4pcs
🔹Connector plug: 6 11 38 365 356 - 1pcs
🔹Plug pins MQS 0.5mm: 61 13 1 393 724 - 4pcs
🔹Plug pin wire waterproof grommets 0.5mm: 61 13 8 366 245 - 4pcs
🔹Negative cable pin: 61 13 1 387 140 - 1pcs
🔹Positive cable pin: 61 13 6 937 069 - 1pcs
🔹5A mini fuse: 61 13 6 917 401 - 1pcs
🔹CAN wire cable connector: 61 13 8 353 746 - 2pcs
🔧 Tools used:
🔹Nitrile heavy duty gloves GRIPPAZ: geni.us/tc4XaYP (Amazon)
🔹BGS 2292 General rachet and socket set: geni.us/0Hhd (Amazon)
🔹BGS 5188 Torx and Hex socket set: geni.us/Zz55Akr (Amazon)
🔹Underhood LED light: geni.us/oUVLUpn (Amazon)
🔹Hazet 1979N-92 flashlight: geni.us/gTxEiHA (Amazon)
🔹Hazet 1979WP-1 magnetic charging pad: geni.us/abMfAS (Amazon)
🔹BGS 1327 plastic pry out tool set: geni.us/LG52lrm (Amazon)
🔹CTEK PRO25S Charger: geni.us/De6hEhl (Amazon)
🔹Amp Tyco crimp tool: geni.us/FQAP7 (Amazon)
🔹Tesa soft tape: geni.us/LvBcTa (Amazon)
Nice video bro
if car already have this box
I can install sensor and coding tpms open
no need to calibre the sensor pairing with car?
You had this option from the factory but the previous owner removed the sensors and un-coded this option?
Check whether the fuse is present. If not, then insert it. Code this option back, put new sensors into the wheels and they will pair automatically and calibrate after a drive. I think I had to make around 10km or so. The car will tell you what to do.
This is the difference between Pro and wannabe 😀