Not really crazy about the breakneck speed demo for the J7 Sky Pro. A little voice over would be nice as well. The update, is that for the J7 cause I see you demo several models???
I would like to change the front digitizer from the stock white one to the black one and order it from your site. Did you change the glass screen as well? As I would like the logo, back arrow (on bottom right) and windows viewer (bottom left) to appear.
I haven't gotten an answer back yet but I suspect the circuit board it temp sensitive, I know the battery is. I'm wondering if. Elmers clear glue is safe to use in place of LOCA glue.
Upon a second look, it looks like you left the battery in, while heating the lens. Was that the case, if so why? Batteries are temperature sensitive and can be ruined with extreme temps.
Why do you have to take the whole back and guts out of the phone to heat and pry off the glass? Just seems to be a lot of work to not mess with other than take apart and put back together after the glass is back on the front. The only logical explanation of why is the heat to loosen the glue will mess with parts inside.
Can you always see the scratch marks of when you took off the last glass? Cause at the end when the phone is dark I see scratch like marks. Don't get me wrong this beats having to get another phone but if we were to watch movies that have lots of dark night time scenes I'm just going to be staring at the scratches going insane. But that being said thumbs up cause I don't think I have the patience to do it plus I always lose screws 😆
I have a question, I have a J7 2018 and recently I sent it to repair the display but the glass crashed and began to fall and I have a spare viewer, so I want to know if this process is the same for the J7 2018 and if not there is risk that the display will be damaged by the heat because the part is not original
digitizer is the glass and your not heating it enough so thats why your chipping it. Keep device on and if it gets to hot it will shut off automatically so you know its too hot...
dear jerry mobile, please tell me the alternative of hardening the LOCA glue instead of UV.. I don't have UV light. also which kind of thread you are using to separate glass from LCD?? reply soon please
se venden salen muy baratos $80 argentinos. pero vi que viene el táctil solo tambien... yo ya cambie 1 pero jamas lo volvería a hacer jaja.. ya me comi un j7 solo desarmando... la verdad perdi todo lo que venia ganando en varios que ya arregle...
question: I bought a new complete screen. I disassembled the phone and removed the broken screen. I assembled the new screen WITHOUT REMOVING THE PROTECTION AND WITHOUT ADDING GLUE ONLY TO CHECK IF THE NEW SCREEN WORKED OK. THE NEW SCREEN WORKED PERFECTLY. I disassembled everything again and assembled it, this time REMOVING THE PROTECTIONS. I DID NOT ADD ANY OTHER GLUE ON THE EDGES NOR ANYTHING ELSE. Now the screen isn't working. On the left everthying is white and it doesn't respond to touch. What is broken, the new screen or the motherboard or something else?
Jerry Mobile wow!!!! foreal? looks like a another thing!! if a change my digitizer I need put the liquid obligatory? or what is the use? Thanks for answer me
For best results, yes. But you need a UV light to make it harden correctly. If you are accident prone and drop the phone a bit, using 2 sided tape (in most kits) makes it much easier to remove any new screens in the future, but dust CAN get trapped underneath eventually. My wife tends to break her screens twice a year, so I don't bother with the LOCA glue, but that DOES give the best results, as you can see Jerry Mobile do.
It happened to my J6 galaxy phone a week ago. Never the phone had fallen or dropped. Not a single scratch on the body of the phone. Warranty period is upto December 23, 2019 but the authorised service center says it is out of warranty and phone has impact damage internally. I doubt it is manufacuring defect, my helplessness is exploited by the vendor in Kottayam i.e. QRS Retail Ltd supported by the service center and the Samsung manufacturer.
Hola q tsl sin el horno se agarra bien igual el vidrio m pasa lo mismo tengo un j7 q tiene vidrio roto pero finciona ,por lo q vi el tactil del j7 esta agregado al display no separado cpmo los demas modulos??
use either 90 percent IPA or go to Home depot and buy Orange Glo Wood Furniture 2 in one polish. It has an agent that really gets all the old glue residue off the LCD.
Ciao caro ho lo stesso j7 2016 come in foto stesso problema ha solo il vetro lesinato ma punziona perfettamente (lo uso ) quanto mi costa cambiarlo se te lo voglio spedire ?
I learned more of what I need in life in 10 min than all of college and public schooling combined
Brilliant, having never attempted anything like this.. I did it first time.. Excellent video, clear and concise. Thank you very much.
Excellent video, clear and concise. Thank you very OK
Not really crazy about the breakneck speed demo for the J7 Sky Pro.
A little voice over would be nice as well. The update, is that for the J7 cause I see you demo several models???
yes write
Great video. Convinced me that I should not try it myself. I found someone who can do it for $120. A bargain.
why so much not even the lcd cost that much.
@@bryanramirez3075 right !
yup its a burgain for who did it.
i did the same thing with note 2 and it works 100 percent :P
I also noticed you separator was set at 140 degrees C/F? I remember you saying something about 90 degrees C 194 F
I would like to change the front digitizer from the stock white one to the black one and order it from your site. Did you change the glass screen as well? As I would like the logo, back arrow (on bottom right) and windows viewer (bottom left) to appear.
Congrats mate 👏👏👏
I haven't gotten an answer back yet but I suspect the circuit board it temp sensitive, I know the battery is. I'm wondering if. Elmers clear glue is safe to use in place of LOCA glue.
Is it original display.s touch.?
The. Cleaning solution you used to clean the screen, is that specific or will any solution work?
Sos un capo todo los otros tecnicos de telefonos sacan el panel junto con el bidrio
Did You did that job for customer, or for Youre self?
What is the temperature used ?
Upon a second look, it looks like you left the battery in, while heating the lens. Was that the case, if so why? Batteries are temperature sensitive and can be ruined with extreme temps.
Hi there, whats the name for the bolt that u are using to hold the wire while u are separating the glass from the lcd.. the gold one in yor right hand
6:41 What product is this? What temperature shall I use to melt the glue?
That Is Rubbing Alcohol
Why do you have to take the whole back and guts out of the phone to heat and pry off the glass?
Just seems to be a lot of work to not mess with other than take apart and put back together after the glass is back on the front.
The only logical explanation of why is the heat to loosen the glue will mess with parts inside.
Answered your own question... Lol
@@CoffeeNo0b0514 hahah ikr!
@@CoffeeNo0b0514 : FJ Killer: This a wonderful example of self-mussitation and soliloquy.
eddyvideostar You could also call it 'talking just to hear yourself speak' or in this case typing.
What kind of glue do you use? Loca 2500 or Loca 1000?
How do you prevent the glue from covering the front facing camera? Or does it not matter?
Can you always see the scratch marks of when you took off the last glass? Cause at the end when the phone is dark I see scratch like marks. Don't get me wrong this beats having to get another phone but if we were to watch movies that have lots of dark night time scenes I'm just going to be staring at the scratches going insane. But that being said thumbs up cause I don't think I have the patience to do it plus I always lose screws 😆
hello sir give me the link of the wire and glue plz
1.2 million j7 users broke their screens lol
yes I did!!!
Colton: Or may have a premonition of such.
Yes ,me too
Lol
Thanks, where did you buy it? The separator, I mean?
What about the Elmer's clear glue question.???
What is LOCA.?
I updated video description, please check
Who else checked their volume 😂😂
I was restarting my laptop :)))))))))
haha
Hi Jerry mobile, please could you show how to replace only glass from Sony xperia XZ.
What glue do you use to glue the glass
Awesome job done well done keep it up
I have a question, I have a J7 2018 and recently I sent it to repair the display but the glass crashed and began to fall and I have a spare viewer, so I want to know if this process is the same for the J7 2018 and if not there is risk that the display will be damaged by the heat because the part is not original
What cleaner did you use after glass removal?
Do you not use the double sided tape to protect sensor and front camera?
Ññlb u
Nice sir ☺👍👍
digitizer is the glass and your not heating it enough so thats why your chipping it. Keep device on and if it gets to hot it will shut off automatically so you know its too hot...
Goog job ! How many milliliters of glue for this, please ?
1.5 ml
What wire did u used sir.
I can understand why, you'd remove the battery but why the circuit board? Is it also temperature sensitive?
I don't want to break the front camera, LOCA glue will destroy it so I removed all parts from inside
how much will it cost to replace the touch screen of j7 prime mobile
20-30$
What kind of gue u Use to glue the glass and the touch pad
dear jerry mobile,
please tell me the alternative of hardening the LOCA glue instead of UV.. I don't have UV light. also which kind of thread you are using to separate glass from LCD?? reply soon please
YuggY BoY Hi! There are no different way, UV light is necessary.
I am using molibdenum wire 0.08mm.
Best regards :)
Jerry Mobile thank you so much.. can u tell me where can I find this wire?? N do u repair the phone as well??
+Jerry Mobile liquide?
Can i use guitar string? The thin one?
Qué pegamento es el que usas para pegar el glas?
the last option was perfect.. wow thanks man...
Thanks! ☺
el protector metalico del parlante de llamada te olvidaste ! pero que gran trabajo te felicito!
diego lopez compa dónde puedo conseguir esos bodrios j7 j5
se venden salen muy baratos $80 argentinos. pero vi que viene el táctil solo tambien... yo ya cambie 1 pero jamas lo volvería a hacer jaja.. ya me comi un j7 solo desarmando... la verdad perdi todo lo que venia ganando en varios que ya arregle...
diego lopez canmuio
diego lopez hhgggyi
El J7 2016 no lleva el protector metálico! Saludos
Wonderful.
Does it fit with the glass with samsung galaxy j7 2017?
What's that tool he is using.. Heat air gun??
what water you used?
a cuantos grados trabajas para no quemar la pantalla??
question: I bought a new complete screen. I disassembled the phone and removed the broken screen. I assembled the new screen WITHOUT REMOVING THE PROTECTION AND WITHOUT ADDING GLUE ONLY TO CHECK IF THE NEW SCREEN WORKED OK. THE NEW SCREEN WORKED PERFECTLY. I disassembled everything again and assembled it, this time REMOVING THE PROTECTIONS. I DID NOT ADD ANY OTHER GLUE ON THE EDGES NOR ANYTHING ELSE. Now the screen isn't working. On the left everthying is white and it doesn't respond to touch. What is broken, the new screen or the motherboard or something else?
Sir mera on8 bhi same demej hai par vo upar sai girnai ke baad thoda bend ho gya hai sir kya vo theek ho payga
Can we do it without disconnecting the mother board?
buddy!!! what is the name of the liquid you use? please BLESS
jesus salvador galindo mulgado It's LOCA glue :)
Jerry Mobile wow!!!! foreal? looks like a another thing!!
if a change my digitizer I need put the liquid obligatory? or what is the use? Thanks for answer me
For best results, yes. But you need a UV light to make it harden correctly. If you are accident prone and drop the phone a bit, using 2 sided tape (in most kits) makes it much easier to remove any new screens in the future, but dust CAN get trapped underneath eventually. My wife tends to break her screens twice a year, so I don't bother with the LOCA glue, but that DOES give the best results, as you can see Jerry Mobile do.
dixielandfarm thanks a lot my friend you help me so much!!
B-7000
Hi bro my panasonic Eluga pulse x outer glass is broken so where can buy it please help me
aap ki shop kaha pe he me rajasthan se hu mere j5 prime ka glass dalna hai kitna kharchaa aayega
Sir any data loss?
Does this phone worth now?( Should i buy it?)
hi anh em ở việt nam muốn mua vật tư và dụng cụ thì nên ở website nào ?
glue name & last times white color which machine use or not
Lenovo p2 p2a42 mobile ka touch+display+LCD hai Keya ?
Where this type of replace ment done in india plz tell me
Does anyone know how to do this on the J7 Prime 2017? (J727T1)
It happened to my J6 galaxy phone a week ago. Never the phone had fallen or dropped. Not a single scratch on the body of the phone. Warranty period is upto December 23, 2019 but the authorised service center says it is out of warranty and phone has impact damage internally. I doubt it is manufacuring defect, my helplessness is exploited by the vendor in Kottayam i.e. QRS Retail Ltd supported by the service center and the Samsung manufacturer.
Price for replacement plzz tell me...😢😢 Iam broken
Perfect sir ji
bhai mere phone sony xperia R1 plus he uski display tut gai baki phone badiya chal raha he usme kitna khrcha lagega sahi karane me pleas help!!!☹️☹️☹️
What light you used to stick it in the end
It's UV light
Please also Include some sound in your Videos ...
Yourz Techy what exactly total reassembled?
Yourz Techy
hi Tamara loda
To: Yourz: He probably speaks no English.
Get some speakers and play music on them
*PROBLEM SOLVED!*
How much is that glass
How much repair modeal 2017 j 7 pro display??
Q likido le echaste cuando pegaste la pantalla?
Me pregunto lo mismo
Hola q tsl sin el horno se agarra bien igual el vidrio m pasa lo mismo tengo un j7 q tiene vidrio roto pero finciona ,por lo q vi el tactil del j7 esta agregado al display no separado cpmo los demas modulos??
En que momento conecto el flex del tactil?
Es un j7 neo? Xq es similar. Y quiero saber si lo podria acer en un neo
Just what I wanted to see. Can I just set the phone outside instead of having to purchase a UV light?
yes
Sir kitna paisa lageg j7 prime ka touch change karwane me
Please reply sir
And also my finger print scanner connection is also cutted. so how can i replace or repair
Hello sir j5 2016 ka glass ka kya price hai
Samsung Galaxy j7 next body replacement kidar milegi
Was that alcohol you used to clean the old glue?
not brother,it is clean agent ,we can supply this ,any need welcome to get whatsapp:+8613682503305
Eddie Salazar visit my channel for more information
This is call isopropyl alcohol
use either 90 percent IPA or go to Home depot and buy Orange Glo Wood Furniture 2 in one polish. It has an agent that really gets all the old glue residue off the LCD.
WARNING: use protection glasses , bcs small pieces of glass can damage your eyes! Thats my advice for everyone!
can we use hair dryer...??
Yes . Just be carefull of overheat it
helpful video.
I will also do the replacement but the marks of glue is left how to fix it
Hola amigo como se llama el líquido que le pones a lo último
Great buddy
super, thanks for your video
what glue is in wear
hola jerry q liquido le pones ?
I still am waiting for an answer to my question about the heating device you use and would a blow dryer work just as well?
It is named lcd separator, if You use dryer will be good too, but 90 degrees Celcius is needed
why's that you can still touch the screen without digitizer or the frontglass screen?
Becouse glass is just the glass, not digitizer
Nice video
thanks u sir .......i like this vedio
We repair this model with oca glue. You can see on our channel
Excellent!!!!
J3 Pr 2016? Glass?
kon sa kemikal tha lcd par jo lgaya tha
Ciao caro ho lo stesso j7 2016 come in foto stesso problema ha solo il vetro lesinato ma punziona perfettamente (lo uso ) quanto mi costa cambiarlo se te lo voglio spedire ?
CAN A DENTAL CURING LIGHT BE USED TO CURE LOCA
me salvaste de gastar plata en otro celu muchas gracias
Lo pudiste hacer?
Do u do glass only replacement for micromax canvas mega 4g q417
so so mfunny