Using a Hydraulic Swaging Tool for Copper Pipe, Line Set
Вставка
- Опубліковано 23 сер 2024
- How to Use the Hydraulic Copper Tube Expander- Used for Line Set, Soft Copper Pipe such as ACR, Annealed Tubing. I Explain How and When to use this Swaging tool over other Swages. Supervision is needed by a licensed HVACR Tech while doing this as Experience and Apprenticeship garners Wisdom and Safety.
Tools Used In The Video
Manual Copper Tube Swage/Expander - amzn.to/2WRPa1M
Ridgid Tubing Cutter - amzn.to/2DnjjR1
Wolverine Tube Reamer - amzn.to/2QGLyMV
Uniweld Hydraulic Swaging Tool - amzn.to/2MlrI8m
Uniweld Swage and Flare Kit - amzn.to/2T55jyn
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our Related Videos/Articles
• Copper Tube Bending To...
• Flaring a Copper Tube ...
• SPIN Swage and SPIN Fl...
• Using a Manual Swaging...
• Swaging Copper Tubing!...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Educational Books, E-Books, Workbooks, Cards, Posters, and PowerPoints:
All Our Educational Products on Our Site: www.acservicet...
All Our Educational Products on Amazon: amzn.to/48pDd82
Mini Split Book and E-Book on Our Site- www.acservicet...
Mini Split Paperback on Amazon- amzn.to/3ytHJSs
Mini Split Paperback on TruTech Tools- www.trutechtoo...
Refrigerant Charging Book and E-Book: www.acservicet...
Refrigerant Charging Paperback on Amazon: amzn.to/46xTeHf
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Online Resources!
Our HVAC Calculators: www.acservicet...
Our Newest Articles: www.acservicet...
Try our HVAC/R Quizzes! www.acservicet...
Our Other Resources: www.acservicet...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Tools Used in Our Videos!
Tool Links on Our Site: www.acservicet...
Our Tool List on Amazon: www.amazon.com...
Support the Channel by purchasing tools through TruTech Tools!
Use this link www.trutechtoo...
Save 8% at checkout using code "acservicetech"
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On Our Social Media & Podcasting Channels!
Patreon: / acservicetech
Facebook: / acservicetech
Instagram: / acservicetech
X: / acservicetech
LinkedIn: / ac-service-tech-llc
Tiktok: / acservicetech
Spotify: open.spotify.c...
Apple Podcasts: podcasts.apple...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
Information in this video is intended for educational purposes only. Any work related to the topics in this video should be performed by licensed technicians or by apprentices under the supervision of licensed technicians. AC Service Tech LLC is not responsible for any possible damages or injuries caused by the use or misuse of any information provided. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#hvacr #hvacr #hvactrainingvideos #hvactraining #hvactraining101 #acservice #acservicetech
#copper #tubing #expander #lineset #ACR #annealed #swages #swaging #swagingtool #tubeexpander
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Shop through Amazon! Your Purchases through Amazon provide a means for channels such as mine to earn advertising fees from all purchases after clicking through. Prices are the same as normal.
Support- www.patreon.com/acservicetech
Tool List- www.amazon.com/shop/acservicetech
For those that are looking for the tools used in the videos: (Linked Below)
Uniweld Hydraulic Swaging Tool- amzn.to/2MlrI8m
Uniweld Swage and Flare Kit- amzn.to/2T55jyn
Uniweld Hammer Swage kit- amzn.to/2CzWMMU
Uniweld 3/4" Hammer Swage- amzn.to/2CzXsSs
Uniweld 7/8" Hammer Swage- amzn.to/2Mja5WE
Uniweld Multi-Size Hammer Swage- amzn.to/2T3Cx1b
Ameriflame Oxy Acetylene Torch Setup- amzn.to/2SRm3JF
#2 Tip for Oxy Acetylene Torch- amzn.to/2SPDaeD
Cap-N-Hook Tip for Oxy Acetylene- amzn.to/2MbhpUk
Air Acetylene Torch Setup- amzn.to/2aQalsb
15% Silver Brazing Rods- amzn.to/2gVLyLc
Nitrogen Regulator- amzn.to/2bXdR5f
Nitrogen Flow Meter- amzn.to/2brvoBg
NitroVue Flow Reg- amzn.to/2MiulYv
Ultrasonic Leak Detector- amzn.to/2Lw4Zpr
UEI DL479 Multimeter with temp sensor amzn.to/2jtsUbJ
Magnet Jumpers- amzn.to/2PyKPQZ
Alligator Jumpers- amzn.to/2PxqJXn
Fieldpiece ST4 Dual Temp Meter amzn.to/2wc1ME3
Fieldpiece Bead K Type Temp Sensor amzn.to/2DBwKfs
Fieldpiece Wet Bulb Temp Sensor amzn.to/2RRI7Tw
Fieldpiece TC24 Temp Clamp amzn.to/2qHLyjZ
Yellow Jacket Refrigerant Gauge Set amzn.to/2aenwTq
Refrigerant hoses with valves amzn.to/2aBumVI
Yellow Jacket Gauge set & hoses amzn.to/2vLVkV9
Yellow Jacket 4 Port Manifold w Hoses amzn.to/2BkuGIq
FieldpieceSMAN360 Digital Manifold Set amzn.to/2BdoaD4
FieldpieceSMAN460 Digital Manifold Set amzn.to/2nB4Fe6
Compact Ball Valve for Refrigerant Hose amzn.to/2KUisW8
QuickDisconnect 90 for refrigerant hose amzn.to/2MMtVcg
JB 6 CFM Vacuum Pump amzn.to/2nqbvo8
Appion Blue 3/8" to 1/4" Vacuum Hose amzn.to/2uYlVyc
Appion Red 3/8" to 1/4" Vacuum Hose amzn.to/2uYg6Ro
Appion Valve Core Removal Tool amzn.to/2uYr8WL
Yellow Jacket 1/4" by 1/4" hose amzn.to/2umtcod
CPS Vacuum Micron Gauge amzn.to/2v1nM3O
Supco Vacuum Micron Gauge amzn.to/2v1JRiA
RectorSeal Bubble Gas Leak Detector amzn.to/2ckWACn
UEI DL389 Multimeter amzn.to/2xAdaJf
Other tool links can be found in the video description section.
Shop through Amazon! Your Purchases through Amazon provide a means for channels such as mine to earn advertising fees from all purchases after clicking through. Prices are the same as normal- www.amazon.com/shop/acservicetech
I have to comment on something here. Your swages are too tight, especially your 1-1/8" swage which is close to being a press-fit. According to Harris, the recommended clearance for Stay-Silv 15 is .002"-.006". Even at .002" the mating tube should slip in the swaged tube freely, and you should be able to very slightly wiggle it from side to side. With the tight fit you show the braze material won't adequately flow down into the joint.
I saw that you rotate the swaging tool about halfway through the swage, and this is the correct method to avoid a potential split tube. However, when you have swaged the tube out until the dies are against the stops, you need to rotate the tool again to the initial position and run it to the stops one final time. The reason for this is because the space between the six die segments will be flatter than the areas that the die segments contact. Those flat-sided areas in the copper are a few thousandths smaller than the radiused areas, which makes the fit tight. By running the dies out one final time in the original position you will get a fully round swage and the proper fit that the tool is designed to give.
Hope that helps!
I never thought about using a unibit as a reaming tool and I've never liked the big round style as it is very clunky.
I mostly use a plumber's pipe reaming tool but now I'll have to give it a try.
Thanks Craig!
That unibit was a cheap one but the smaller the steps, the better job the step bit will do, thanks Tomon8tor!
I couldn't find the right size tubing for my hvac without buying hard acr tubing. It won't expand without splitting and that will make it practically impossible to do where I need to without internal oxidation.
Great demonstration Craig in the usage of this tool. Great tip about rotating the tubing half-way in the process. Keep up the good work!
Thanks Stuzman!
i love the hilmor tool. worth every penny
Thanks Oscarbm1234!
100% Agreed! I do refrigeration, so I got the 5/16" and 1/4" dies as well. Still need to get the 1-3/8" and 1-5/8" dies to complete my kit, but in the 4 years I've had the Hilmor I haven't needed either of those sizes. I'm sure I will at one point though.
Love My Hilmor Swaging set ! Very fast , no cracking on 5/16 or 3/8 like lever benders . Ya just have to keep fresh Hyd / oil in these tools or it will go crazy when ya really need it .
Love that tool, easy to use and simple to make the correct swedge all the time.
Thanks a lot Ray Ray!
Thanks for the video Craig. I would like to ask you a general question. When you have to braze 2 pipes vertically, do you swage the one looking up or down?
Good info passed along Craig ... Next generation ...
Thanks Eddy!
I have a different brand hydraulic swagger, goes up to 1-5/8”, and it is very valuable when you need it. Nothing like using that instead of a coupler and having one more joint to braze.
Oh yeah, for sure, thanks TCPHVAC/R!
I can now complete my spaceship. Thanks
I wonder if these heads would fir the Milwaukee pex expansion tool?
Wow, i never thought about using a multi or uni bit to reaming the pipe. Brillant :)
Absolutely, save some time. When I do plumbing, I cut the wire brush and put the rod into the second drill too, thanks
Thata nice.. however I like the yellow jacket one. Yes this is more compact but the down falls is the hydraulic fluid. The yellow jacket is is pure muscle with one squeeze.Not much to make the swedge. So ultimately less parts to break or in cold climates seals to go bad.
Thanks I did another video on the manual swager too and I explain how i use that thanks
Please have video about ductwork installation
Does it work for PEX A?
Most of the leaks I fix are on expanded joints, better job using fittings.
do you sweat the swaged connection afterwards?
Hi. I was wondering if this tool would be good enough to swedge about 20 to maybe 200 wedges or run. I make copper kits for refrigeration systems and seeding by hand gets old. Please let me know
how do you expand a piece of metal tube where the depth in about depth of a washer 1/16th with out the tool your using slips off the very shallow rim edge? thats the issue i find my self in
Dewalt should do a Battery operated tool like this!!
Nice tool it make job easy
Question. Is it bad to install 90deg bent on refrigerant lines to make it look pretty clean installation? I wonder if this causes any restrictions or loose pressure?
My line size is
3/8 and 7/8 copper
You can use long turn 90, not short turn like what is used in water piping. However, the less the better. Sometimes we need to and we swage and bend line set to reduce the amount of field brazed joints, thanks!
This is a tool is my requirement what is this price where to your home delivery
Can we use this as a gun barrel plz reply bro
Has tried doing this for water lines?
Where to buy the tools.... There are available in asian market..?
How about 3/8? I was told that would crack the copper
Hello, can you swage soft copper?
Sir, what is the cost ₹ for this?
I noticed there is not a fitting to do 1/4 pipe, what is the best way to swage 1/4 pipe?
I use this tool for tubing larger than 3/8" even though it has a 3/8" die. 1/4" would be too small to make a die for this tool. You would use the standard flare block and block swage or the block and hammer swage- - amzn.to/2T55jyn - - amzn.to/2T3Cx1b - - amzn.to/2CzWMMU
Or sleeve with 3/8 :)
I’ve been in jobs where guys keep cracking the pipe any idea why it does ?
That is because they are not turning the tool half way through the swage to move the seam between the expander portions or the copper is not factory annealed enough. Also I don't use the tool on 3/8" tubing but just the bigger tubes because it could crack the 3/8" if the copper is not annealed enough. For 3/8", I just use a hammer swage with flare block usually, thanks
They aren't reading the instructions. Don't got all the way, don't keep it in the same rotation the whole way. These tools will ALWAYS push the size farther than they need. Attention needs to be paid to when to stop. Never go all the way.
Thanks! Cool tool!)))
Thanks Tapch!
Sir how much cost???
Nice video thank you. Question does the dies from the manual tool fit the hydraulic tool?
Hey Ron, You would have to use the same manufacturers dies and for instance, these dies won't fit onto my other manufacturers manual swaging tool because the manual dies are threaded. This is not, thanks
My swage tool isn't working like it's not building pressure any advice
Did you check to see if it still has fluid inside? What brand is it?
Price Bai g
I want this!
Good Video. I was wondering when or where you might use a 1 1/8" swage? A 5 Ton system?
Yes 5 ton systems and larger commercial systems
Price this tools
thanks, partner for sharing!!!!!
Thanks jimbola77!
Nice tools
Where did you pick up that step Rheemer at?
Here is a link to the stick reamer- amzn.to/2Di4WKc
Here is a link to a milwaukee step bit used for reaming- amzn.to/2t8rVTn
What is the price for that tool
Hey Markooooni, I have the tool linked in the comment and description section, thanks
Is there a similar tool to reduce the diameter of pipe?
Not that I am aware of, thanks!
Price the tool
I have that linked at www.acservicetech.com/tools thanks!
I thought this method was stop along time ago.
Every try it to expand pex pipe?
I usually just use the crimp on fittings, thanks
Have you tried the Swaging drill bit tool set? Whats a better investment?
Yes I have and I will likely do video at some point. I do not like them compared to hammer swages, or manual or hydraulic expanders. It creates a fine dust as it scrapes the inside and you have to have the speed and force pushing in on the pipe at a certain rate or it does not seem to work well. You are also relying on a drill battery and the space to have a drill in the location. Some people love them but I don't really, thanks!
Oh yes that is so much faster than my manual expander that needs a whole press of the handle to work, NOT!
I want to do a video on the manual swager and hammer swages too. I do like the manual swaging tool for 5/8 through 7/8 and I just use the hammer swages or swaging block/handle for 3/8". I use the hydraulic for tight spaces,1 1/8", and sometimes for other tube sizes, thanks
Why do you call it a swedge and not a swage... Oh you're Canadian, right?
सरजी विडीयो हिन्दी मे बनाओ
Helo sir want this video used Singh tools please contact me
👏👏👏👏👏
Thanks Argenis!
Too tight and capillary action wont take place.
How much for that tool
Too much