Awesome demo of an awesome pedal (from the videos I've seen). I appreciate the depth you went into and going the extra mile to compare it to the real amp. Like you said, due to the variation in AC30s over the years (I bet if you compared a vintage AC30 and a brand new one they wouldn't sound identical) it doesn't sound exactly the same but the differences are subtle. In isolation I think it easily does a good enough job for gigging/recording. I read a forum post some time back from someone that owns an AC30 that also uses this pedal (I don't remember his reasoning, maybe volume when driven). He said it sounds just like his amp and that the only real difference was in how it reacts to pedals in front of it. Personally that wouldn't be of concern for me because I'd be using it for its own tones anyway.
Thanks for this great demo of the AMT V1. This pedal caught my interest because of the Vox AC sound, parallel effects loop and the cab sim. The dual channel switching is a cool feature, but I'm not sure it will benefit me. I just wish the pedal would have different output jacks for simultaneous sending the signal to an amp as well as a PA, like the LA2 pedals. They should do an LA2 of this pedal with an extra middle eq knob and a parallel effects loop.
Hi. Thank for feedback. I know they are planning LA3 series and V3 may be a part of it. But there's no information about its functionality yet, only rumors
Вокс звучит словно чуть более скомпресированно. Но разница настолько мала, что нивелируется эквалайзером. А в миксе и вовсе разницы не будет слышно. В который раз убеждаюсь, АМТ- отличные аппараты. Сам пользуюсь F1 и не нарадуюсь. Что для гитары, что для баса.
Как по мне так звук ну очень сильно отличается. Динамику не сравниваю, смысла нет. Впечатление будто amt v1 накрывают двумя здоровыми пуховыми одеялами.
I've been enjoying your videos with the AMT pedals. I was wondering if you would be able to make a video when you use the V1 pedal and the S2 pedal together to make a 3 channel set up into the fx return of an amp. The S2 could provide a clean Fender sound, and the dirty Soldano sound, whereas the V1 could be used as a crunch sound. That setup would give you a clean Fender, crunch Vox, and high gain Soldano channel all from one amp. That would be amazing.
Hi Steven. Thanks for feedback. As a matter of fact, that's exactly what I've been using for a couple of years now for all my shows - V1+S2. Recently I switched to R2 though, it's a tiny lil bit smoother. The difference is almost unnoticeable. I guess that 3-channel solution is well covered here and in F1 video. I'm planning a big video on all LA2 pedals, just received the rest of them yesterday. That one should finally answer the most popular question like what's the difference between S2 and Vt2
Could you do a video where you show how you use the V1+R2? I'd like to see that. Your videos show the pedals individually, but I'd like to see how to wire them up together to get a 3 channel setup.
Awesome demo of an awesome pedal (from the videos I've seen). I appreciate the depth you went into and going the extra mile to compare it to the real amp. Like you said, due to the variation in AC30s over the years (I bet if you compared a vintage AC30 and a brand new one they wouldn't sound identical) it doesn't sound exactly the same but the differences are subtle. In isolation I think it easily does a good enough job for gigging/recording.
I read a forum post some time back from someone that owns an AC30 that also uses this pedal (I don't remember his reasoning, maybe volume when driven). He said it sounds just like his amp and that the only real difference was in how it reacts to pedals in front of it. Personally that wouldn't be of concern for me because I'd be using it for its own tones anyway.
Another great demo. Where I like the original Fender amp more than the F1 I prefer the sound of the V1 over the AC30.
Great demo!
Very good video!! Congratulations! Well done!!! Very complete!
Una estupenda revisión
Thanks for this great demo of the AMT V1. This pedal caught my interest because of the Vox AC sound, parallel effects loop and the cab sim. The dual channel switching is a cool feature, but I'm not sure it will benefit me. I just wish the pedal would have different output jacks for simultaneous sending the signal to an amp as well as a PA, like the LA2 pedals. They should do an LA2 of this pedal with an extra middle eq knob and a parallel effects loop.
Hi. Thank for feedback. I know they are planning LA3 series and V3 may be a part of it. But there's no information about its functionality yet, only rumors
Cool, that sounds like possibly good news! =)
Вокс звучит словно чуть более скомпресированно. Но разница настолько мала, что нивелируется эквалайзером. А в миксе и вовсе разницы не будет слышно. В который раз убеждаюсь, АМТ- отличные аппараты. Сам пользуюсь F1 и не нарадуюсь. Что для гитары, что для баса.
Скажите пожалуйста, Вы слушали через наушники?
testdrive9809 Слушал. Со спикосимом все нормально.
Как по мне так звук ну очень сильно отличается. Динамику не сравниваю, смысла нет. Впечатление будто amt v1 накрывают двумя здоровыми пуховыми одеялами.
Вообще странно, я разницы почти не заметил. Вероятно сказываются условия прослушивания.
Никита Шишков подскажи пожалуйста, ф1 можно сразу в звуковую карту направлять или нужен некий понижатель мощности??
Парень нашёл на сайте АМТ кнопку «BUY ALL» )))
У меня с недавних пор тоже такой есть и ещё немного от АМТ. Педали превосходного качества.
I've been enjoying your videos with the AMT pedals. I was wondering if you would be able to make a video when you use the V1 pedal and the S2 pedal together to make a 3 channel set up into the fx return of an amp. The S2 could provide a clean Fender sound, and the dirty Soldano sound, whereas the V1 could be used as a crunch sound. That setup would give you a clean Fender, crunch Vox, and high gain Soldano channel all from one amp. That would be amazing.
Hi Steven. Thanks for feedback. As a matter of fact, that's exactly what I've been using for a couple of years now for all my shows - V1+S2. Recently I switched to R2 though, it's a tiny lil bit smoother. The difference is almost unnoticeable. I guess that 3-channel solution is well covered here and in F1 video. I'm planning a big video on all LA2 pedals, just received the rest of them yesterday. That one should finally answer the most popular question like what's the difference between S2 and Vt2
Could you do a video where you show how you use the V1+R2? I'd like to see that. Your videos show the pedals individually, but I'd like to see how to wire them up together to get a 3 channel setup.
How about this one - 8:38 ?
Max Solo Music that is awesome. i think i need to get me the v1 pedal. Thanks buddy.
Glad I could help
А будет ли полноценный обзор головы рековой от амт?
Нет, АМТ дали задний ход по этому видео и у меня нет усилителя
Fabulous video - with cat assistance I would guess!
Yeah, absolutely! Thanks for your feedback
Could you please clarify what was the power amp when you compared the V1 vs the AC30?
Sure. The sound from the A/B switch was rooted back into AC30's FX loop and miced, if I remember it correctly
id like an r2 BUT i just dont get why i would need a v1 preamp?? can i not just put it in front of amp??
R2 works just fine without V1. It sounds best when connected into a power amp, not into the 'front of the amp'
the cat guardian is showing that cat person 😁😅