Nice video win and falls shown for knowledge sharing. Thumbs up. ;-) Nowadays I'm not a big fan of LED in the dashboard. My trials started long ago with the Renault Twingo. Plastic strips of many colors and origins also where tried for different shades/colors. Ex. You want blue color. So had blue strip, but with "yellow" light the result will be green(ish)... Eventually went back to normal bulbs. LOL ;-) Tip 1: Instead of soldering LED, which is a pain in the as.., there are LED's already prepared with the sockets and all. It's a direct replacement, take the normal bulb, put the led. Done. Check polarity. Tip 2: As noticed the round tip LED give a very narrow light beam (spot light). With a rotary tool (Dremel) cut and polish the tip so it becomes flat. That spreads the light beam a lot more... A felt disk on the dremel and a drop of "car polish" gives a perfectly polished surface in less than a minute. The light beam spreads considerably better. Tip 3: When inserting 5 mm LED's. A hole drilled with a 4.8 mm drill bit, makes for a perfect fit without the use of a LED holder. Some hot glue on the back hold it well and can be used as insulator. ;-)
Hello! the color plastic plates that you change in minute 4:04 where I can buy them or if you can specify the material. Thank you very much for sharing your knowledge.
I dimmed my dash on the push button but it now won't brighten up works perfectly with the lights off, but if i turn the lights on the whole dash goes out, now i cant drive it in the dark, i only bought the car today!
Bonjour, super idée la bande LED pour l’affichage LCD, j’ai le même véhicule (phase 2) et je voudrais savoir si avec l’installation et les branchements que vous avez fait, le réglage de la luminosité est toujours possible ainsi que si le mode « conduite de nuit » est disponible (extinction de la partie droite de l’afficheur) ?
Change all of them as you will be doing this all over again in a few weeks. It only cost about 5 € to buy twenty lamps at a motor factors do not go to the Citroen main dealer the will charge 5 € for each lamp.
Anyone help please tryed everything firstly one side was bright other not took unit out changed the bulbs side that wasnt working but back in know none of the working tryed another whole unit didnt work they come on but really faint and can’t c them is there a fuse that I can change anyone help got Picasso desire
Hello parabens great video I learned a lot but I would like to clarify a doubts this led tape is for the automatic model tbm the same way you turned them on the dashboard is the same positive and negative
Thank you for showing us the mod. The modded colour was red then you changed back to green. Personally I'd prefer Blue so all I have to get blue plastic cut to size and install to make readout blue?
Hello ! My left LCD doesn't good works in the middle, and the right doesn't too at the right part, (i can't see the outside temperature and the instant fuel comsuption) The lights works but at very low luminosity, how can i fix it ? i must buy a new LCD ?
i have a similar problem, in my case the rigth lcd has faltering numbers in the hour, i can`t see the hour or info text fine. Could be problem of leds or lcd?
Should not handle the bulbs with bare fingers as this reduces the bulb life. All my Picasso bulbs are white and only have 1 cable cluster for the lot. what year is this Picasso? Engine also sounds rough.
Recent am achiziționat și eu un Citroen. Mulțumesc pentru acest video. Eu am culorile verzi și vreau sa le schimb în albastru sau roșu. Ce fel de becuri îmi trebuie? Adică ce wați. Mulțumesc
sorry but that looks crap as you can see bright spots and all that soldiering is not needed just get the correct smd led bulbs that fit in the holders that are 360° I. e leds round the sides and it works perfectly with no bright spots
The 5mm magnifying glass LED creates spots, but the 5050 type LED strip is OK. The dashboard clock unit was damaged so the default bulb connectors are not powered anymore.
Hola a todos , a ver si alguien me puede ayudar , en el tablero de la picasso el sector derecho tiene el fleje en la punta rota y por eso no puedo visualizar las indicaciones del tablero , tiene arreglo ?? , donde puedo llevarlo ?? , desde ya muchas gracias por su ayuda.
Nice one. Thanks. We got Xsara last week and want to replace the dash bulb behind speed lcd's. With your video now I know how to. Cheers Furulevi.
А зачем менять. Что не так?!
Nice video win and falls shown for knowledge sharing. Thumbs up. ;-)
Nowadays I'm not a big fan of LED in the dashboard. My trials started long ago with the Renault Twingo. Plastic strips of many colors and origins also where tried for different shades/colors.
Ex. You want blue color. So had blue strip, but with "yellow" light the result will be green(ish)...
Eventually went back to normal bulbs. LOL ;-)
Tip 1: Instead of soldering LED, which is a pain in the as.., there are LED's already prepared with the sockets and all. It's a direct replacement, take the normal bulb, put the led. Done.
Check polarity.
Tip 2: As noticed the round tip LED give a very narrow light beam (spot light). With a rotary tool (Dremel) cut and polish the tip so it becomes flat. That spreads the light beam a lot more...
A felt disk on the dremel and a drop of "car polish" gives a perfectly polished surface in less than a minute. The light beam spreads considerably better.
Tip 3: When inserting 5 mm LED's. A hole drilled with a 4.8 mm drill bit, makes for a perfect fit without the use of a LED holder. Some hot glue on the back hold it well and can be used as insulator. ;-)
Merci beaucoup pour le magnifique Conseil.
Изключително видео. Браво!
This a very cool mod. It is a good fix and a very welcome improvement over original, nicely done.
This is amazing man, thanks for posting
in gamba con la passione per la grande xsara picasso
Very nice mod, but I'd try to put a diffusion panel between the LED strips and the LCD.
That's a good idea, but the 5050 type LEDs look pretty well even without one.
Браво, отлична работа!
Good work ! Gratulation !
you should have sanded the lenses of the 5mm diodes flat to soften the light. That way the dots will be more spread to a large surface
I once tried something similar and the LED exploded...
I put regular white bulbs in mine, and not only does it look brighter than this guy, but the light Is also spread more evenly
Hello! the color plastic plates that you change in minute 4:04 where I can buy them or if you can specify the material. Thank you very much for sharing your knowledge.
Se puede hacer también en el modulo del aire acondicionado
Gracias por compartir,maquina!! Me ahorre el taller eléctrico! Abrazo!
I dimmed my dash on the push button but it now won't brighten up works perfectly with the lights off, but if i turn the lights on the whole dash goes out, now i cant drive it in the dark, i only bought the car today!
Cual es la medida adecuada para el cartucho de gasoi de citroen Sara picaso exclusiv 1.9 HDI .Gracias
Bonjour, super idée la bande LED pour l’affichage LCD, j’ai le même véhicule (phase 2) et je voudrais savoir si avec l’installation et les branchements que vous avez fait, le réglage de la luminosité est toujours possible ainsi que si le mode « conduite de nuit » est disponible (extinction de la partie droite de l’afficheur) ?
Jó videó! Már megcsinàltam a magyar megfelelőt is :)
Bonne courage 👍👍
It's a much better result if you use the 5058 high brightness white led strip than to use bulbs of any kind.
If I only want to add those LED strips do I need to make the modification seen around 5:15 or is it as simple as it seems from 7:10?
One other thing. Did you use 5050 strip with 30 or 60 leds per Metre?
Hello. I have a picasso 2litre hdi. My screen have a problem on one side i mean clock side. Do you have idea whats the problem?
Change all of them as you will be doing this all over again in a few weeks.
It only cost about 5 € to buy twenty lamps at a motor factors do not go
to the Citroen main dealer the will charge 5 € for each lamp.
Anyone help please tryed everything firstly one side was bright other not took unit out changed the bulbs side that wasnt working but back in know none of the working tryed another whole unit didnt work they come on but really faint and can’t c them is there a fuse that I can change anyone help got Picasso desire
Just leave it as it is - It looks better that way
Hello parabens great video I learned a lot but I would like to clarify a doubts this led tape is for the automatic model tbm the same way you turned them on the dashboard is the same positive and negative
Very good!
I'm having a hard time to understand how to show the fuel consumption /100 :(
Волшебник
Thank you for showing us the mod. The modded colour was red then you changed back to green. Personally I'd prefer Blue so all I have to get blue plastic cut to size and install to make readout blue?
+Gavin Adams
Yes, or a white plastic with blue LEDs.
+furulevi does this also works on the airco dash?
It could work, the electronic version of that also uses 12 volt bulbs, power the 5050 type SMD LEDs with 12v and it should be nice and bright.
Tragedia!Przed 100 razy lepiej.
Hello ! My left LCD doesn't good works in the middle, and the right doesn't too at the right part, (i can't see the outside temperature and the instant fuel comsuption) The lights works but at very low luminosity, how can i fix it ? i must buy a new LCD ?
Just replace the bulbs.
furulevi Ok thank's !!
Vídeo muito bom..👏🏼👏🏼👍🏼👍🏼
you used LEDs light cold or warm?
i have a similar problem, in my case the rigth lcd has faltering numbers in the hour, i can`t see the hour or info text fine. Could be problem of leds or lcd?
try first to replace the bulbs
ok! thanks, what model/name are the bulb?
I think those are 12V 1.2W also as in the automatic climate control unit.
Should not handle the bulbs with bare fingers as this reduces the bulb life. All my Picasso bulbs are white and only have 1 cable cluster for the lot. what year is this Picasso? Engine also sounds rough.
Year 2000, 2.0 HDI
it has an odd rumble noise, my 806 has same noise but many times louder, and i cant find it!
Respekt 👍👍👍
подскажите пожалуйста марку ламп
Very good... muy bien, muy interesante..👍
De cuanto es el tránsitor y los led
At 4:48 the 7812CT is a 12V voltage regulator so that the LEDs won't receive more than 12 volts. It's cheap.
Recent am achiziționat și eu un Citroen. Mulțumesc pentru acest video. Eu am culorile verzi și vreau sa le schimb în albastru sau roșu. Ce fel de becuri îmi trebuie? Adică ce wați. Mulțumesc
+Dragos Mihaila
12Volt, 1.2Watt
+furulevi
ua-cam.com/video/k-fK5Q0KlCk/v-deo.html
Muy bueno artista !!!
Quero encontrar um profissional que faça isso no painel do meu picasso 2.016v!
The you find green plastic?
the green plastic (4:16) was there, it has to be the original from the car manufacturer...
Show de bola
im guessing you lose the ability to dim / brighten the lights?
Probably, it depends from where it receives power.
@@furulevi im going by the fact it was powerd by a fixed voltage regulator........
sorry but that looks crap as you can see bright spots and all that soldiering is not needed just get the correct smd led bulbs that fit in the holders that are 360° I. e leds round the sides and it works perfectly with no bright spots
The 5mm magnifying glass LED creates spots, but the 5050 type LED strip is OK. The dashboard clock unit was damaged so the default bulb connectors are not powered anymore.
200,000 ? time for a new car ! mind you they go on for a long time with a bit of a fix up now and again
Holy shit. Original much better!
Gracias
Change windshield first
It was replaced ► ua-cam.com/video/-00_ozaAZMQ/v-deo.html
Hola a todos , a ver si alguien me puede ayudar , en el tablero de la picasso el sector derecho tiene el fleje en la punta rota y por eso no puedo visualizar las indicaciones del tablero , tiene arreglo ?? , donde puedo llevarlo ?? , desde ya muchas gracias por su ayuda.
make sure the foil is connected correctly and is not broken...
I wished I was smart enough to do this :(
The details are shown, you just need courage :)
you are almost out of fuel
Yes, 2 lines, 1 line is the last, that one won't disappear.
Alaattin Oğuz 2 bars ~ 250+ km
furulevi the red dot is very low fuel
Top showww
Horrendo... se marca la iluminación led, no probó el reóstato y el trabajo bien de webon.
Robi to Pan usługowo?
It was my car
Ok
Pode falar que fico uma bosta?
My brother has a chloe hanging in 9999999999
Tragedia! 100 razy lepiej było przed.
The initial red was better than the final green?
mas lo que webio¡¡¡
?
8
What a ugly car🤣🤮🤮🤮
Le + et le - ne correspond pas chez moi ?