Modified FTX carnage #1
Вставка
- Опубліковано 8 лют 2025
- this is my ftx carnage with mods most of my parts have been ordered with Antics model shop ....Ian harper models ....CMC ....and FTX... most of the parts are expensive but things like shocks motor esc remote and receiver ant that bad.. hope you like the vid will post a 2nd vid when this is completed ie esc new motor and remote and some more parts thx jay
Great rc👍👍👍
Hiya,
I so agree and appreciate your kind response. Like I said it was one of the best vids I've seen for a long time.
I so admire all the work and upgrades you have achieved on your RC. I'm hoping to purchase my RC on blck Friday ?
You are a ⭐⭐ !!
With your experience which should I consider Carnage of Outlaw !!
Take care, and thanks.
Len
Very nice shelf queen.
Hi good video! I’m in middle of doing the same to my nitro carnage, do you no where you got that steering cover from” carbon fibre thanks
Wow! Really nice upgrade. I 've got à 4300 kv brushless motor on my carnage and I broke a lot of things with it. Thats alu upgrades was awesome! But I want to put carbon piece on my car to make it stronger
Magnifique, very beautiful carnage !
thank you very much old vid but i still got it now still going sorry for the late reply
Thank you very much for getting back to me your car is epic👍👍
no worrys bro sorry for the late reply due to work old vid i got i know but i still got it now me and my m8s will be posting vids soon so keep a eye out
Looks good been debating a Ali chassis as 3s power on mine has torn the standard to shreds + Bugsta wheels help allot and if you said raidient reactor motor combos are not good in our experience
Cool car mate. I've just got a carnage and wrecked it a few times I'm going to make it look like yours 👍
no m8 dont need to worry about the dogbones just keep it as stock hope all goes well m8 with the parts i got a HSP truggy now time two start over again and do this one up the parts on HSP are so much cheaper purple this time i will be posting FTX carnage#2 with my new 4370kv motor and piggy back shocks cooooool
yeah cool but when in another 2 years time :)
Nice build though really liked it and i am considering doing all these upgrades to my own FTX carnage... do you think spending all the money you did on it was worth the time, money and effort building it?
Nice I'm upgrading mine!!
wow love it
Looks awesome, when mine starts breaking I might copy urs
Don’t if you don’t want it to break more.
Hi can you say ware you got the shock towers as I am looking for a set? Great job on your RC and video Thanks.
nice set up, not too sure on all the aluminium but hey it's your car you do what the fuk you like to it lol. I have a vantage that it just stupidly fast on my channel, easily capable of doin 70mph.
had 83 gps on it bro and a 2 year later and its still going
It's very nice😎
Hi, Just lv what you achieved with your FTX. Just about to purchase the same car ?
Do you have any regrets in your selection ?
Please can you advise where your up-graded oil-filled shocks were purchased please ?
Great video, well done.
hey bro thanks for the feed back shocks i got from the FTX i did have piggyback shocks boomerang RC shocks there good look the part but they dint seem to last to long . my overall opinion of the FTX carange is a must have handles fab goes like stink if you have the right KV motor and LIPO spur gear and dog bones could be a little better but then dont go crazy driving it you got to get yourself antie roll bars makes a massive difference on handling hope this helped you mate one more thing i posted this vid like 4 years ago and yes to this day i still have it. get the upgrades for it mate it helps and looks wicked costs a bit but worth it just remember dont punch the throttle hard and spur gear will last longer drifts like hell in the sand on the beach tho loves it enjoy bro FTX vantage is cool too. :)
Hi ! do you change dogbones when upgrade front and rear lower arms? I upgrade in my ftx carnage lower arms and my stock dogbones is to lenght.
Hi mate I've ordered new steering arms alloy ones in blue as first time I drove it crashed and snapped the original ones that are on it could you do a video showing how to fit as I'm sure alot of people will have the same problem as they are shocking!
Wow very nice :)
Nice
looks cool, nice1:)
Just getting into a bugsta and heading down this road with it
Awesome I jut bought one today, were can I buy all these upgrades from just eBay and that ?
Hawkeye just type ftx carnage upgrades on google
Hi man. You said you were getting like a 4370Kv motor. What is the performance like on it with that motor? Does it still have enough power to lift the front wheels off the ground? What sort of top speed are we looking at here? A reply would be very much appreciated from anybody as I'm new to the hobby and not sure what Kv to go for on a brushless system!
sorry a bit late on getting bk to you ...yea 4370kv will be fine but also if your running a 120amp esc and it can run a 3 cell lipo your doing if not go for a say 5/6000mah lipo running say 75c you should still get it to do it hope this helps bro sorry to reply so late my vid is old but i still got him cheers mate
reco jeff.Z thanks man some much needed info here!
I'm running a 3s battery on the standard brushless motor and esc it runs fine jus goes through more spur gears also using the bugsta wheels and tyres as the carnage tyres seem so spin on concrete with a 2s battery so I upgraded to bugsta ones and she pops up with ease
Hey I really need help I got my son one of these for xmas, am hes mum, its modified like this and cost a fortune anyway took it out a few times, yesterday went out it burnt to a halt, the moter turns on and revs but wheels dont spin, only slightly a teeny bit, it sounds more "tin-y" it's not the driveshafts or anything to do with wheels been told it's the pinion spur gear, but I haven't a clue how to change it or reset them after I have helppppp!!!
take off the rear gear and pinion guard and take a look, replace pinion or gear. or better still take it into your local hobby shop and they can easily fix that!
Hi M8. Can you help me to do some info how to change fr lower arm. I couldnt manage to pull the pin out
Hey bro yes no worrys what is it exactly pin ??
@@recojeff.z4517 Hi. The one holding the arm in the body.
Lower fwd arm
that's a really nice car but for 100quid less u could have a jlb j3 speed
You dont think adding unnessercary aluminium parts is just gonna make the car heavier?
Pug the car is as light as a feather the weight will help it
They can be easier to bend sometimes compared to plastic though so i dont see the appeal of aluminium a arms lol
This car is a animal on 3s and the upgrades are needed as the plastic breaks I brought one n bust it the same day good car and good to learn I jus can't seem to find the parts to upgrade like he has can get wheel knuckles and steering arms ect but I can't find the carbon plate that the switch sits on there's a few other bits I can't find either like spur gear covers ect I see his spur gear isn't protected either dunno if I'd like that stones ect hitting it and damaging it wouldn't be good surly
can you get the front part of the Ali chassis without the main piece or not?
yes you can bro make it look on hobbyking / antics / or even ebay for for what you are looking at hope this helps sorry for the late reply
What would you say the first thing to upgrade for strength
David Robinson hubs and A arms
sorry its been long on the reply .. go for the big bottom allimum plate that should do it ... sort the shocks out ie new oil and that should be your start off if you can as well run it on a 4370kv motor brushless that way your gonna have fun any more than that ive found i just keep doing in the spur gear cheers m8 james
David Robinson shock towers
chassie hubs and just try not to rag it to much lol good parts if you need them antics / hobbyking /and ebay hope this helps
nice projet!
Hey! I got a carnage body yesterday and on the front grill sticker it said vrx instead of FTX... has this ever happened to anyone else??
Same car.
Hi does anyone know where I can get loads of ftx vantage parts but instead of blue I'm going for a red them
i dont think you can henz why i wanted in the end white and blue if you cant find what you want get some 2pack red paint that will do it hope this helps bro
I got a carbon full chassie of ebay for £22 😁
Did you know that you can put two servos on this car and two motors. Type in on google search: ftx carnage hybrid
This is what I'm planing to do with my carnage!!
When’s the next video mate
Where you you buy your parts because I want to buy some
The normal guy ftx-rc.com/rc-hop-ups/ftx-carnage-options/ftx-vantage-carnage-aluminium-rear-hub-carrier
antics / hobbyking even ebay sorry for the late reply
You should get a nitro
yes you can m*
You spent £450 on mods..... You can buy Kratton v4 6S for that!!!!
but wheres the fun in that .
@@recojeff.z4517 When it's going 60 mph on 6s bats......
and where u get them from?
what shock are they again mate?
Boomerang™ Type PB Race Ready Aluminum Double Suspension Adjustable Piggyback Shocks 100MM Red 115mm hope this helps m8