Thanks for sharing! I think what happened with the first mission was that the waypoint you entered exceed the total mission (default) length of 2.5km (see message @2:07). Make sure you change the mission length to max distance of 5km in settings. Because you exceed the limits with waypoint #2 it just ended the mission. So although you could see Wayonts #2, #3 and #4 in the UI they were effectively de-activated because they exceed the mission distance limitation. If Hubsan is going to put artificial distance limits on their missions then they should block the user from entering any waypoints that exceed the mission distance limitation rather than allowing the user to enter them thus leaving with the impression that it will fly to these invalid waypoints. Anyway...that is my theory as to why the first mission failed. HUBSAN, please remove these unnecessary artificial mission distance limitations of 5KM. The missions should not have any distance limitations. Look at the way Parrot does their waypoint/Mission Planning software if you want to get it right. Again the drone should be able to have a mission of any length and it should continue the mission even if it loses it's signal...The failsafe should be to return home only if the battery level gets too low to complete the mission otherwise it should keep following the mission. The waypoints (GPS points stored uploaded to the aircraft) will tell you how far you are away from the HomePoint and how much distance remains to complete the mission and from that you should be able to calculate/estimate (roughly) how much battery life is left to RTH safely and therefore determine RTH should be triggered by the aircraft when it is flying the mission.
Morning my friend. Great video buddy. I don’t have this particular drone, but i do have 2 hubsan zinos. Thanks for sharing buddy. You have a new subbed here. Have a great weekend Captain. Thanks for all you do and please keep flying.
Change your distance from 2500m to 5000m in the settings for waypoints. That’s why the first 2 missions didn’t work. The last one was under 2500m so it accepted the mission. Cheers from Aussie
I will say one thing else, you video is the smoothest I've see of all the ZFP videos! You must have got a great one off the assembly line...not jittering at all.
Great video as always. Thanks for sharing 👍
Thanks for sharing! I think what happened with the first mission was that the waypoint you entered exceed the total mission (default) length of 2.5km (see message @2:07). Make sure you change the mission length to max distance of 5km in settings. Because you exceed the limits with waypoint #2 it just ended the mission. So although you could see Wayonts #2, #3 and #4 in the UI they were effectively de-activated because they exceed the mission distance limitation. If Hubsan is going to put artificial distance limits on their missions then they should block the user from entering any waypoints that exceed the mission distance limitation rather than allowing the user to enter them thus leaving with the impression that it will fly to these invalid waypoints. Anyway...that is my theory as to why the first mission failed.
HUBSAN, please remove these unnecessary artificial mission distance limitations of 5KM. The missions should not have any distance limitations. Look at the way Parrot does their waypoint/Mission Planning software if you want to get it right. Again the drone should be able to have a mission of any length and it should continue the mission even if it loses it's signal...The failsafe should be to return home only if the battery level gets too low to complete the mission otherwise it should keep following the mission. The waypoints (GPS points stored uploaded to the aircraft) will tell you how far you are away from the HomePoint and how much distance remains to complete the mission and from that you should be able to calculate/estimate (roughly) how much battery life is left to RTH safely and therefore determine RTH should be triggered by the aircraft when it is flying the mission.
Hi friend
I applaud this wonderful project 👏👏 Have a nice day today~~!!👍13
Thank you
Morning my friend. Great video buddy. I don’t have this particular drone, but i do have 2 hubsan zinos. Thanks for sharing buddy. You have a new subbed here. Have a great weekend Captain. Thanks for all you do and please keep flying.
Thank you
Change your distance from 2500m to 5000m in the settings for waypoints. That’s why the first 2 missions didn’t work. The last one was under 2500m so it accepted the mission. Cheers from Aussie
Next time just try doing them within a closer radius from your takeoff point and I guarantee it will work
Yes it worked.
The waypoints can only be done Within certain radius from the takeoff point
Nice demo of the waypoints. Just wish Hubsan would fix the tilted horizon issue.
It dropped out of waypoint mode once you got to the first point. Was the mission length too long?
I will say one thing else, you video is the smoothest I've see of all the ZFP videos! You must have got a great one off the assembly line...not jittering at all.
I think Hubsan will get the horizon tilt fixed very soon. The horizon on pretty all their quads are great