Adding an External Keypad to the Interlogix Simon XT

In this video, Joe discusses the external keypad options for the Interlogix Simon XT and how they can be interfaced with the system. The keypad to use with this panel is the Interlogix Two-Way Talking Touchscreen. This keypad serves as a second on-site access point, and it uses touchscreen controls.
The main reason to add an external keypad to a wireless alarm system like the Interlogix Simon XT is to provide a secondary access point for controlling the system. This can be very useful for users with large properties or those who often enter the building from different locations. For example, if a user has both a front door and a back door in their home, they might want to have system access points in both locations so that they can more conveniently arm and disarm. Another example is that a user might place a keypad in their bedroom so they can more easily set their system to "arm stay" before they go to bed.
In the case of the Simon XT, the system uses the Interlogix Two-Way Talking Touchscreen Keypad. This keypad features a 3.5 inch LCD touchscreen display and spoken voice functionality. Many users prefer using the keypad for basic system operation instead of the Simon XT System itself. This is because most people will prefer the touchscreen controls of the keypad over the push-button controls of the Simon XT. They keypad makes it convenient for the user to arm and disarm their system and to operate any programmed Z-Wave smart home devices.
Please note that many users forgo a keypad in knowing that they can control their system through the Alarm.com Mobile App. All the user will need to do is pull-up the app on their Android or iOS device. Since most users will have their smartphone on them at all times, using this feature can be even more convenient than using the system or a keypad. However, a keypad is still a viable option for having a permanent on-site location for operating a system.
alrm.gd/get-mon...

[@lawrence471]

Mine won't learn it says failed.

[@DrummerBoyJustin]

Will this work on a simon 3 panel?

[@johnwittman2403]

How do I sync the time on the touchpad?

[@joeschroeder4986]

Does the external keypad have to be immediately adjacent to the main keypad to do this? I've had to reset the main keypad but the other one shows a red box & says contact an installer. It is still mounted on the wall across the house.

[@AlarmGrid]

The only indication of range I see in the installation instructions is that it works best if at least 3 feet from the main panel. In the installation guide (www.alarmgrid.com/documents/interlogix-60-924-rf-ts-quick-install-guide) there is a section on testing the remote keypad, I would suggest you follow those instructions to be sure it is able to communicate properly to the main panel.

[@mib20000]

hi I did all this but how do I get it to do no entry delay. I tried the button in the arm screen that says delay and I hit off and it still counts down

[@mib20000]

@Ciara Hibbert oh ya . I was having a brain fart . Thanks

[@JobuRum]

The programming button is hidden. How can I access it?

[@SterlingDonnelly]

Are you saying you never see "System Programming" if you continue to hit the down arrow or do you not know your system's installer code?

[@ipscone]

The programming button can't be seen if armed. Disarm first