Quick note: You do not need to open the in-game adrenalin overlay to enable or disable AFMF. The default hotkey is "ALT+SHIFT+G" and you should get a notification in the top right corner telling you that it's on or disabled.
@@rocket2739 True if you have a 144hz monitor and can get 72fps constant then use AFMF to get to 144 you can feel the difference. It's an adwomen technology for singleplayer games where latency is not the most important thing.
Just built a all RED build, rocking a 7800XT MERC with a 7800X3D, this is really gonna boost my games! Got a 4k monitor and really struggling too hit that 240hz/240FPS mark, I usually run most games like War Thunder or Squad 44 at 100-180FPS, I may actually get too hit 240FPS or even be able to play Star Citizen again!
120hz oled looks smoother than 240+hz LCD while being easier to drive. Would love a 240hz 4k oled though they won't probably show up until NVidia has cards that support DP2.1
@@ajess01111 and the odyssey OLED 4k version of the G8 doesn't support 4k240 native period. It does it with compression thru dp1.4 or hdmi2.1, making it irrelevant, let's add input lag on both sides of the connection to just say it's 4k240. They can gtfo with that crap.
Just built a backup PC and wanted to try the new Adrenalin features so I bought a RX 7600 XT since all my other AMD GPUs were RX 6000 series. I need to do more tests but the 7600 with these new features is giving my ASUS Tuf Gaming RX 6700 XT some serious competition.
@@LucituZ0815 The difference is the newer series can use all of AMD Adrenalin Software. Opening this software in each GPU shows many more settings/features/technologies that the 6700 doesn't have available to it. Only 7000 cards can select HYPR-RX to enable said features.
@@LucituZ0815 Driver only gives a slight advantage to the 6700 and installing Adrenalin and setting each card to its strengths give the 7600 the advantage. They're sitting side by side on my bench so ambient temps are the same but neither card thermal throttled playing Space Marine II and Black Myth Wukong, a couple of demanding games.
just a quick info. The AFMF 2 still has lag. at it lowest its 12 ms of lag. At its worst its around 20. AFMF 2 is really good for games that aren't Esport like. Cyberpunk, god of war, hogwarts. Etc. but for games like cs tf2 rainbow six its best to leave it off. As in those games every millisecond counts.
@@jonnycollisonno it won’t, quite opposite. This is a clusterfuck. Pc gaming is trash, look at all crap you have to go through, how many acronyms are we at now? All for “smoothing” so we’ve gone from gsync freesync, to, VRR, to frame generation, Antilag. This is what a great card use to be for. Imagine pay 800-1000 for just the gpu and still be running and tweaking all this crap…. On top of that now we’re downgrading software to get a better feature….. where the hell is the “better story” driver. The non crash software…..
@@djnes2k7 pc gaming is not trash, you don't have to pay 1000 usd for a graphics card unless you're getting a 4080, 4090 or a high end amd gpu and also there is a lot of things you can do with a computer rather than just gaming like productivity which you can't do as well with a console or a phone, also this feature is only for people who have a underperforming gpu or want more fps at the cost of input latency, you can perfectly just install your gpu into your system, install the drivers and play without going through all the hassle shown in this video
I tested the AFMF2 feature with an inexpensive RX 6500 XT - I like Radeon graphics cards, but this feature has in 1080P the same effect in my eyes as disabling vertical synchronization. You have more frames per second, but the graphics card is put under much more stress, the fans rev up massively and the temperatures rise considerably. Maybe you can counteract this effect with Radeon Chill, for example - I haven't tested that now. Nice video and greetings from Germany.
You need to use Radeon Chill yes. Cap it at half your monitor's refresh rate. For me I have a 165hz QHD so I use Radeon Chill at 82 for both values. Otherwise if you get more fps than your monitor you will have this weird sensation your describe. If you don't achieve your monitor's refresh rate with AFMF2 you don't need to use Radeon Chill with AFMF2.
Having one doubt ! CPU - AMD R5 3600 GPU - AMD RX 7700 XT MB - MSI B450 Tomahawk Max RAM - 32 GB 3200 Hz PS - CM 650W The doubt is should I Enable or Disable the SAM (Smart Access Memory) If it will affect the Game Performance with low CPU & high GPU by enabling SAM ? Thnx in advanced...
Friend of mine is planning on getting me a 7900 xt, so this seems like it should hopefully fix all my issues with Starfield (and other titles). I've bookmarked this video and will rewatch it when it arrives, most likely around Black Friday if there's a good deal on it.
I have a problem with AMD chill. When I am playing it works and keeps my fps at 120. But the moment I go into a menu the GPU starts to max out its power consumption. Which ironically it does in the least demanding section of the game.
I always prefer the look amd feel of native resolution settings and would rather turn my graphics details to medium to increase native fps and not keep them on ultra and add frame generation to it.
new warzone update , it uses fluid motion 2 in the new ui menu but then when you go to warzone it says not available, it was available before the update, any fixes?
Not unless you want 30fps! If you don't have any VRR support on the TV (like my older one didnt) just use chill capped at 60 with "Enhanced Sync" also turned on. That should be a smoother experience and reduce screen tearing. If you can cap the frames in the game itself, don't use chill and cap within game menu. Also you can flip on Vsync in the game as well. That should remove all tearing period. If you are struggling to hit 60fps, you might have to just cap at 30fps and play that way.
@@berserker_2886 I meant uninstalling them with an utility called ddu and then reinstalling them. Sometimes old drivers messed with new ones, but if it's a new system might not be the case
’m using AMD Adrenaline software to record my gameplay, but even though I selected the game window, it’s also recording the Discord voice chat by accident. I don’t want the Discord chat in the recording. How can I fix this?
@Panjno great gpu, overclocks really well for some really great performance gains. not worth getting if u like ray tracing but is on par and outright beats the 4080 super on rasturisation
@@Panjno I absolutely love it, I'm not a huge Ray tracing Isn't the best but it works Everything else is wonderful about it The one thing that I will say that I really love is the software I'm much prefer it over Nvidia control panel
Some years ago I followed your video on empty standby list, now Im seeing many ppl saying it clears out ram cache too quickly and forces to the ram to load the stuff back again and again. Which can happen with game cache too, so should I uninstall it? Please someone help, any suggestions would be helpful.
I dont know if its because of the new driver but since instaling that all my games crash when resized i been looking for fix for hours nothing is helping
idk why mine is so weird I put the amd fps overlay to see if my frames are better and when I load onto fortnite and go to test my frames it says my frames are way lower than what it says on the overlay. (the overlay fps says like 840+fps but the in game fps counters says 350 fps )
On every game I've tried it it says "not compatible with the game's display mode". I've had vsync off and fullscreen on every time so something is wrong then
im using a 7900xtx paired with a 7800x3d on a 27" 1440p 165hz monitor. i mostly use vsync in everygame and get the 165fps without downscalling or frame gen, i tried this feature but just makes my gpu usage go from 80% to 100% and temp from 65 to 80 and pwr from 300w to 465w... sooo... yeah.
Same experience with GRE. Card is very good as-is, but added noise for usually quiet card - not so much. The only use for it is with Ray and Path tracing, especially latter one. I feel bad for even trying it tho, literal torture even for 4090.
Thinking of building Ryzen 5 7600x and RX7700XT for 1080p ultra, bevause my monitor is a 1080p 165Hz monitor. Only thing that worries me is the excess fps beyond 165 thats going waste and i will not be avlble to push the card ti its full potential until i get a 1440p monitor in future🥲
depends on the type of game; for shooters you can whip the camera around fast and afmf2 can't do the corners of the monitor very well if you do this; I've seen the corners turn into a blurry mess and it makes sense because if you move your pov diagonally, the interpolated frames are trying to interpolate large areas that weren't in either of the frames that were sent by the game engine. Also, if you can whip the camera fast, then input latency matters. For doing air to ground in dcs world I use AFMF2; input lag doesn't matter, and all the frames are easy for afmf to work with.
Hi thanks for the video great work as usual! i have a question... have you tested the latency in case of frame cap (to stay in the range of refresh monitor) plus anti-lag plus AFMF2?
Any idea on how to make the Metrics Overlay show actual FPS other than "NA"? Others like GP and CPU metrics show up OK. Am on Adrenalin 24.10.1 on Ryzen 7700/RX 6700XT.
AFMF2, in terme of image quality is inferior to losseless scaling x2. But it is better in terms of input lag. Anyway dont use it if you have access to fsr 3 frame gen, fsr 3 is MUCH better quality.
Hallo Panjno, ich habe ein Problem und zwar in Warzone und CoD Multiplayer, ich habe es in der Xbox App auf dem PC Win11. Ich kann das spiel nicht in AMD Software einbinden es funktioniert nicht weil mein Windows dann sagt das ich keine admin rechte habe um das spiel hinzufügen. Bei steam gibt es keine probleme und alle spiele sind automatisch drin bei AMD Adrenalin. Kannst du mir bitte helfen?
9:13 this isn't always the case in seems, funny enough, with the example you show of CP2077, their FSR3 implementation is garbage as the the upscaler paired with it is terrible. You're better of using AFMF2 or LSFG
I have ryzen 5 8600g 760 gpu and my pc goes black screen random. I can hear sounds and and also player move but cant see nothing and my keyboard doesnt respond so i have to force restart my pc. I have the latest update drivers from gpu and bios but still have this problem. Does anyone know how to fix it?
@@Descenter1976 if u can feel 8-10ms, u would be the fastest and most sensitive with the best cognative functions human in the world. U should consider joining the olympic to get some gold medals.
wanted to use your code for a windows key, not sure what to get tho home or pro? PC is for gaming not sure if that makes a difference. can anyone help nod me in the right direction and ill be on my way
The video should have made mention of ways to properly clean uninstall and install Radeon drivers. Use DDU software to uninstall previous Nvidia and Radeon drivers before installing new Radeon drivers.
this is nonsense. i have been installing radeon drivers on top of each other for nearly a year now with 0 issues, inside the radeon app. only time it matters is when windows does something dumb and installs old drivers on its own.
Even though I use a Nvidia GPU still I don't have any clue why am I watching this video. Anyways can i use fsr 3.1 mod for cyberpunk 2077 using a vega 3 iGPU. And does the lossless scalling FG work in beamng?
Panjabro if you can see this, we desperately need you for thrones and liberty optimisation. It runs like shit, low settings make it worse. THE BEACONS ARE LIT. SEND AID.
Can anyone confirm more lag in games that can run at your monitors refresh rate with afmf? I run it with everything even comp titles and if it’s there it doesn’t bother me much
Hey I’m desperate for help. I have the AMD Radeon RX 7600 XT 16 GB and I feel like my graphics just aren’t that good. When I look in the distance while playing any game, the textures are kind of pixelated, especially if they are moving (like moving trees in the distance, water etc). Additionally my Pc sometimes just gets really loud but after closing the game (2-3 times) and still standing on the same spot, my pc suddenly sounds normal. After changing the tuning setting on my fans to “quiet” it’s better but after every restart of my pc I have to turn the setting on again. Pls has anyone some advice?🥲 Especially for the graphics problem
Quick note: You do not need to open the in-game adrenalin overlay to enable or disable AFMF. The default hotkey is "ALT+SHIFT+G" and you should get a notification in the top right corner telling you that it's on or disabled.
Me with rx 580 4gb watching this video 😢😢
(2)
+1
460 :)
i have the same GPU and it runs amazing for me
@@mxhmiouz3387can you download it?
Slapped it on 780m 8845hs a few days ago. Doubled my fps in most games. Coupled with RSR or FSR 2.1. incredible how well these technologies work now.
Frame rates are still the same mate. Fake frames do not help anything or anyone. Run native for the best results.
@@glenmcl frame interpolation is fantastic for adding smoothness to GPU-bottlenecked games
@@rocket2739 True if you have a 144hz monitor and can get 72fps constant then use AFMF to get to 144 you can feel the difference. It's an adwomen technology for singleplayer games where latency is not the most important thing.
@EAGYSL but if you can run 144 native, you run it native.
It's only worth it on 4k or older gpu imo
@@ziggs123 The resolution doesn't make a difference for AFMF as it doesn't upscale the image.
Just built a all RED build, rocking a 7800XT MERC with a 7800X3D, this is really gonna boost my games! Got a 4k monitor and really struggling too hit that 240hz/240FPS mark, I usually run most games like War Thunder or Squad 44 at 100-180FPS, I may actually get too hit 240FPS or even be able to play Star Citizen again!
120hz oled looks smoother than 240+hz LCD while being easier to drive. Would love a 240hz 4k oled though they won't probably show up until NVidia has cards that support DP2.1
@@AutomatedUser I got the Samsung Geo 8, lol it is OLED
@@ajess01111 takes more than wishful thinking to be OLED. Neo G8 is a VA LCD.
@@ajess01111 and the odyssey OLED 4k version of the G8 doesn't support 4k240 native period. It does it with compression thru dp1.4 or hdmi2.1, making it irrelevant, let's add input lag on both sides of the connection to just say it's 4k240. They can gtfo with that crap.
@@AutomatedUser alright
Just built a backup PC and wanted to try the new Adrenalin features so I bought a RX 7600 XT since all my other AMD GPUs were RX 6000 series.
I need to do more tests but the 7600 with these new features is giving my ASUS Tuf Gaming RX 6700 XT some serious competition.
your 6700xt can do afmf 2 aswell
@@LucituZ0815 The difference is the newer series can use all of AMD Adrenalin Software. Opening this software in each GPU shows many more settings/features/technologies that the 6700 doesn't have available to it.
Only 7000 cards can select HYPR-RX to enable said features.
@@oswaldjh hyprx is just downlocking/downvolting, its not a new technology you can do all of that with 6000 series aswell, same goes for afmf 2
@@LucituZ0815 Driver only gives a slight advantage to the 6700 and installing Adrenalin and setting each card to its strengths give the 7600 the advantage.
They're sitting side by side on my bench so ambient temps are the same but neither card thermal throttled playing Space Marine II and Black Myth Wukong, a couple of demanding games.
@@LucituZ0815 afmf2 works alot better on 7000 series due to 7000 series gpu supports AI accelerator.
Do you think that if I look for a pro version of Windows it will improve the performance of the operating system?
I got my pro version from BNH Software and the PC got a little faster but it wasn't a big deal.
Well, I still want to try it myself.
@@Mo-Thoughx Are you joking or just really stupid?
just a quick info.
The AFMF 2 still has lag. at it lowest its 12 ms of lag. At its worst its around 20.
AFMF 2 is really good for games that aren't Esport like. Cyberpunk, god of war, hogwarts. Etc.
but for games like cs tf2 rainbow six its best to leave it off. As in those games every millisecond counts.
Lol i don't have a pc why am i watching this
It'll convince you to buy one 😂
scrub
ONE OF US, ONE OF US 😂
@@jonnycollisonno it won’t, quite opposite. This is a clusterfuck. Pc gaming is trash, look at all crap you have to go through, how many acronyms are we at now? All for “smoothing” so we’ve gone from gsync freesync, to, VRR, to frame generation, Antilag. This is what a great card use to be for. Imagine pay 800-1000 for just the gpu and still be running and tweaking all this crap…. On top of that now we’re downgrading software to get a better feature….. where the hell is the “better story” driver. The non crash software…..
@@djnes2k7 pc gaming is not trash, you don't have to pay 1000 usd for a graphics card unless you're getting a 4080, 4090 or a high end amd gpu and also there is a lot of things you can do with a computer rather than just gaming like productivity which you can't do as well with a console or a phone, also this feature is only for people who have a underperforming gpu or want more fps at the cost of input latency, you can perfectly just install your gpu into your system, install the drivers and play without going through all the hassle shown in this video
I tested the AFMF2 feature with an inexpensive RX 6500 XT - I like Radeon graphics cards, but this feature has in 1080P the same effect in my eyes as disabling vertical synchronization. You have more frames per second, but the graphics card is put under much more stress, the fans rev up massively and the temperatures rise considerably. Maybe you can counteract this effect with Radeon Chill, for example - I haven't tested that now. Nice video and greetings from Germany.
lower the fps cap
You need to use Radeon Chill yes. Cap it at half your monitor's refresh rate.
For me I have a 165hz QHD so I use Radeon Chill at 82 for both values.
Otherwise if you get more fps than your monitor you will have this weird sensation your describe.
If you don't achieve your monitor's refresh rate with AFMF2 you don't need to use Radeon Chill with AFMF2.
aweeee panjo...thnk u my bru,just did this now (from south africa).ohh yea i got a rx6800..
Great tutorial video!
AFMF has Tearing. Vsync dont work. I hate Tearing more than less fps
good to know that it works with dxvk!
Thanks for this well done video.
thanks for your good videos
Having one doubt !
CPU - AMD R5 3600
GPU - AMD RX 7700 XT
MB - MSI B450 Tomahawk Max
RAM - 32 GB 3200 Hz
PS - CM 650W
The doubt is should I Enable or Disable the SAM (Smart Access Memory)
If it will affect the Game Performance with low CPU & high GPU by enabling SAM ?
Thnx in advanced...
always enable SAM it shouldnt ever decrease your performance as it simply allows the cpu to access more of the gpu vram
@@meetingorb3428 Thnx so much for reply bro 🤩
I don't remember if the ryzen 3000 series can enable SAM, but if you can enable it
@@Q1nt0 Thnx so much for reply bro 🤩
This is amazing, and works amazing. Frame generation on any game. Kudos to AMD.
Friend of mine is planning on getting me a 7900 xt, so this seems like it should hopefully fix all my issues with Starfield (and other titles). I've bookmarked this video and will rewatch it when it arrives, most likely around Black Friday if there's a good deal on it.
Amazing video my man will deffo take a look at this since getting 4K 144hz panel i need all the frames i can get haha
I have a problem with AMD chill. When I am playing it works and keeps my fps at 120. But the moment I go into a menu the GPU starts to max out its power consumption. Which ironically it does in the least demanding section of the game.
I always prefer the look amd feel of native resolution settings and would rather turn my graphics details to medium to increase native fps and not keep them on ultra and add frame generation to it.
This is actually really nice on Dragons Dogma 2 because of poor pefromance of that game.
new warzone update , it uses fluid motion 2 in the new ui menu but then when you go to warzone it says not available, it was available before the update, any fixes?
*Cries in old Polaris gpu language*
Any experience with competitive shooter games? Bad Latency or other sideeffects? Or is it just that good and gives u more fps for free?
So if my tv only goes to 60fps, radeon chill at 30?
Not unless you want 30fps! If you don't have any VRR support on the TV (like my older one didnt) just use chill capped at 60 with "Enhanced Sync" also turned on. That should be a smoother experience and reduce screen tearing. If you can cap the frames in the game itself, don't use chill and cap within game menu. Also you can flip on Vsync in the game as well. That should remove all tearing period. If you are struggling to hit 60fps, you might have to just cap at 30fps and play that way.
I don't have the Overlay tab there, how do I turn it on? (using AMD Adrenaline v. 24.9.1) Also don't have the "Record & Stream" tab..
My amd build just crashes every time i game, have to reload the game about 5 times before it will stay on
Have you tried to do a clean driver install?
@@oimazzo2537 the drivers that come with amd adrenalin? (And how do you mean clean? Sorry I'm pretty new to pc stuff, its a nightmare)
@@berserker_2886 I meant uninstalling them with an utility called ddu and then reinstalling them. Sometimes old drivers messed with new ones, but if it's a new system might not be the case
@@oimazzo2537 sorry mate thought I'd replied, ill have a look at weekend when I fire the old girl up
@@oimazzo2537 well, just done that all and still doing it 😂 might just buy a 3090ti and have done with it
Fragpunk or Deadlock fps guides?
Is the amd fps counter or the steam more accurate? because they show 100fps or more difference.
You can use Frame Gen on any GPU through Lossless Scaling, which is better than AFMF2.
isn't lossless scaling a paid software ?
@@rocket2739 and?
@@rocket2739 It's 5$...
@@rocket2739 yes> steam
that costs money
Love your videos bro! Would you ever consider doing handhelds like the Lenovo Legion Go?
Hi Panjo 👋🏼 quick question man , is hone optimizer worth trying for fps boost ?
’m using AMD Adrenaline software to record my gameplay, but even though I selected the game window, it’s also recording the Discord voice chat by accident. I don’t want the Discord chat in the recording. How can I fix this?
I'm hoping to get the 7900XTX for my birthday this year the 2x 8-pin
I'm running a Corsair TX850M 80+ Gold PSU
Is this worth doing if you're into competitive gaming or should it only be done for single player/campaign games?
It adds some latency so no.
Nooo not in comp games
i had weird tearing and artifact at middle of the screen
Have a 7900xtx. Super exciting news
How have you been finding it? Really tempted to jump over to one
@Panjno great gpu, overclocks really well for some really great performance gains. not worth getting if u like ray tracing but is on par and outright beats the 4080 super on rasturisation
@@yoshikagekira1991 I know, and prices are really good right now, just waiting to see what the RX 8800XT is able to offer first
@@Panjno I absolutely love it, I'm not a huge Ray tracing Isn't the best but it works Everything else is wonderful about it The one thing that I will say that I really love is the software I'm much prefer it over Nvidia control panel
please makea new video on how to boost fps and decrease lag in GTA 5 please please please please please 🥺 🙏
there is 3rd preview driver. your version is outdated one.
Using frame generation in Cyberpunk 2077 disables VSync which makes it look awful. I am using a Power colour Red Devil 6700xt.
OK, how about AMD Z1?
WHITCH BRAND GPU WHAT IS THE TOP TMEP ???
Why do you say this is a new update when it's been existing for almost 2 months or more ???
would you recommend using it in hunt showdown 1896?
Whens the next nvidia overlay update coming?
did they fix radeon chill in this update or was it just my system that was stuttering on the old driver?
Do you have some good or secret pro settings for keeping fps maintining at a high level with the least input lag for cs2? Esp when faceit is involed.
fact that you have to do video like this is exactly the reason why amd have in gpu sector 12% market share and thats never gonna change
what u just said doesn't make any sense lmao
Some years ago I followed your video on empty standby list, now Im seeing many ppl saying it clears out ram cache too quickly and forces to the ram to load the stuff back again and again. Which can happen with game cache too, so should I uninstall it? Please someone help, any suggestions would be helpful.
Bro averages 200fps in cyberpunk 😭😭
I wanted more frames in cs2 video says don't use in cs2😢😢
I dont know if its because of the new driver but since instaling that all my games crash when resized i been looking for fix for hours nothing is helping
idk why mine is so weird I put the amd fps overlay to see if my frames are better and when I load onto fortnite and go to test my frames it says my frames are way lower than what it says on the overlay. (the overlay fps says like 840+fps but the in game fps counters says 350 fps )
What about raw mouse input
can you pls update the amd adrenaline video if there are any changes since 8 months ago?
On every game I've tried it it says "not compatible with the game's display mode". I've had vsync off and fullscreen on every time so something is wrong then
The game need to support direct x 11/12
How would you do this if running a game from pc game pass? Cant seem to scan or manually add the game 😢
i dont get the option for the specific driver, i might have to go to the link if i want to use this
I just checked for updates and I see nothing ?
did you watch the video?
@@an_account-o2o yes. Downloaded the proper driver. Have to double check later today see if I got the wrong one maybe
im using a 7900xtx paired with a 7800x3d on a 27" 1440p 165hz monitor. i mostly use vsync in everygame and get the 165fps without downscalling or frame gen, i tried this feature but just makes my gpu usage go from 80% to 100% and temp from 65 to 80 and pwr from 300w to 465w... sooo... yeah.
Same experience with GRE. Card is very good as-is, but added noise for usually quiet card - not so much. The only use for it is with Ray and Path tracing, especially latter one. I feel bad for even trying it tho, literal torture even for 4090.
Thinking of building Ryzen 5 7600x and RX7700XT for 1080p ultra, bevause my monitor is a 1080p 165Hz monitor. Only thing that worries me is the excess fps beyond 165 thats going waste and i will not be avlble to push the card ti its full potential until i get a 1440p monitor in future🥲
No need to worry, just lock the FPS at 165. Less noice and power consumption is a good thing, and there isnt much difference between 165 and like 200.
@@thirdeyeCOD upgrade ur monitor to 360hz
Is it better to run games at native res (eg. 1080p in my case) without FMF2, or use supersampling (SSAA 4x) AND FMF2 ?
depends on the type of game; for shooters you can whip the camera around fast and afmf2 can't do the corners of the monitor very well if you do this; I've seen the corners turn into a blurry mess and it makes sense because if you move your pov diagonally, the interpolated frames are trying to interpolate large areas that weren't in either of the frames that were sent by the game engine. Also, if you can whip the camera fast, then input latency matters. For doing air to ground in dcs world I use AFMF2; input lag doesn't matter, and all the frames are easy for afmf to work with.
Hi thanks for the video great work as usual! i have a question... have you tested the latency in case of frame cap (to stay in the range of refresh monitor) plus anti-lag plus AFMF2?
It is a must have on legion Go
Amazing, what games have you tried it on? I hope steam deck will get support
@@Panjno god of war wu Kong runs 60 fps + no ghosting or lag on high settings 800 upscale to 1600
Any idea on how to make the Metrics Overlay show actual FPS other than "NA"?
Others like GP and CPU metrics show up OK.
Am on Adrenalin 24.10.1 on Ryzen 7700/RX 6700XT.
im still runing an xfx radeon r
x580 can you do a video with the best setting for this card
AFMF2, in terme of image quality is inferior to losseless scaling x2. But it is better in terms of input lag.
Anyway dont use it if you have access to fsr 3 frame gen, fsr 3 is MUCH better quality.
Fsr 3 looks shi
@@arkappa-t I would judge that on a case by case basis, but you're not wrong
Hallo Panjno, ich habe ein Problem und zwar in Warzone und CoD Multiplayer, ich habe es in der Xbox App auf dem PC Win11. Ich kann das spiel nicht in AMD Software einbinden es funktioniert nicht weil mein Windows dann sagt das ich keine admin rechte habe um das spiel hinzufügen. Bei steam gibt es keine probleme und alle spiele sind automatisch drin bei AMD Adrenalin. Kannst du mir bitte helfen?
9:13 this isn't always the case in seems, funny enough, with the example you show of CP2077, their FSR3 implementation is garbage as the the upscaler paired with it is terrible. You're better of using AFMF2 or LSFG
I have ryzen 5 8600g 760 gpu and my pc goes black screen random. I can hear sounds and and also player move but cant see nothing and my keyboard doesnt respond so i have to force restart my pc. I have the latest update drivers from gpu and bios but still have this problem. Does anyone know how to fix it?
When update coming
Frame generation.. best way to get a higer latency!
@@Descenter1976 if u can feel 8-10ms, u would be the fastest and most sensitive with the best cognative functions human in the world. U should consider joining the olympic to get some gold medals.
@@sc9433 I'm actually a bit confused by this because he actually had more like 30ms added latency, but AFMF only took the blame for 9
Someone help. My 7950x3d keeps parking shit all over the place when I game on windows 11.
Processor lasso works, but not for all games
Windows isn't well optimized for AMD CPU stick with 10
Jayztwocents has a good video guide on fixing the parking issues with that CPU.
afmf 2 is also useless if you use eyefinity as you can't enable it 😢
Umm, I use eyefinity and afmf 2 is enabled. I know the old afmf you couldn't use with eyefinity, but it appears that has changed.
@@Mercstar Mentions that it inactive and ask for eyefinity to be disabled
Any idea for flight simulators like xplane 12?
Cheers!
is it good for warzone?
Holy sht, i need that for my 4090
Will this work well for world of warcraft ?
it depends on what you are doing i would say. if i was doing anything competitive i would leave it disabled and lower settings to get extra frames.
WoW profits more heavily from the extra CPU-Cache like AMD Ryzen 7800X3D.
since installing this all my games are stuttering like mad, 6950xt, ryzen 9 5900x any ideas anyone????
Could you please make cs2 optimization for more fps with amd please.
can i ask you does now fluid motion work on every game like gta v assassin creed and many others right u can increase fps ?
Depends on the api
wanted to use your code for a windows key, not sure what to get tho home or pro? PC is for gaming not sure if that makes a difference. can anyone help nod me in the right direction and ill be on my way
The video should have made mention of ways to properly clean uninstall and install Radeon drivers. Use DDU software to uninstall previous Nvidia and Radeon drivers before installing new Radeon drivers.
this is nonsense. i have been installing radeon drivers on top of each other for nearly a year now with 0 issues, inside the radeon app. only time it matters is when windows does something dumb and installs old drivers on its own.
Ironically enough, ddu breaks my system more than adrenalin updating
@@lclnbm How so?
well he has been doing alot of videos and most of them include DDU, he prolly thought everyone would've known by now
@@QwertyMeloned huh, probably.
Even though I use a Nvidia GPU still I don't have any clue why am I watching this video. Anyways can i use fsr 3.1 mod for cyberpunk 2077 using a vega 3 iGPU. And does the lossless scalling FG work in beamng?
WHY YOUR CPU AND GPU TEMP TOO LOW?
C/GPU temps are never too low
@@rocket2739 his temp too low cpu temp 45c how amd cpu and gpu temp under 60c in full load how
Since I play fast paced fps, will it affect the latency/responsiveness of my system?
Yes
@@arkappa-t Positiverly or negatively
@@Cyborg3Ninja negatively
I have rx 6600 and i dont have AFMF, even after updating drivers
pls help
can i get banned on steam using dxvk?
Panjabro if you can see this, we desperately need you for thrones and liberty optimisation. It runs like shit, low settings make it worse. THE BEACONS ARE LIT. SEND AID.
Can anyone confirm more lag in games that can run at your monitors refresh rate with afmf? I run it with everything even comp titles and if it’s there it doesn’t bother me much
Would this work for a 6700 XT 12gb
Hey I’m desperate for help. I have the AMD Radeon RX 7600 XT 16 GB and I feel like my graphics just aren’t that good. When I look in the distance while playing any game, the textures are kind of pixelated, especially if they are moving (like moving trees in the distance, water etc). Additionally my Pc sometimes just gets really loud but after closing the game (2-3 times) and still standing on the same spot, my pc suddenly sounds normal. After changing the tuning setting on my fans to “quiet” it’s better but after every restart of my pc I have to turn the setting on again.
Pls has anyone some advice?🥲 Especially for the graphics problem
is this feature available for RX 6600?
Yess
Me watching this wile when i run a game it keep crashing
beta drivers, and what the spec of PC??? GPU update??? this is the drivers update/test/beta, and third party software...
Can it work on ryzen 5 7530u??
Koelpin Avenue
Temperature on GPU get higher 400W GPU power usage and insta Coil Whine start killing me ears
it doesn't increase power draw idk what on abt
@@b3as_t Well it does...if game had capped FPS, cause it bypasses FPS lock. And forces GPU to run full power.
@@b3as_t For me it increase power usage also GPU start getting higher Coil Whine and higher temps
can i turn it on when playing pubg?