in the video the Makita Hex Driver is used, here is a link: www.amazon.com/Makita-DF012DSE-Lithium-Ion-Driver-Drill-Auto-Stop/dp/B071F4XTPK/ref=sr_1_5?ie=UTF8&qid=1517335008&sr=8-5&keywords=makita+cordless+hex+driver personally I use the Hitachi and love it: www.amazon.com/dp/B004Y74AU6/ref=sxr_sxwds-rbp_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3346373102&pd_rd_wg=vc1BO&pf_rd_r=QA0WMDJVM8FBKX0QSCJF&pf_rd_s=desktop-rhs-carousels&pf_rd_t=301&pd_rd_i=B004Y74AU6&pd_rd_w=N2Wod&pf_rd_i=makita+cordless+hex+driver&pd_rd_r=f7009658-44f3-439f-89fd-67c263c676d7&ie=UTF8&qid=1517335008&sr=1 There is also a DeWalt Version amongst others.www.amazon.com/dp/B000051WQV/ref=sxr_sxwds-rbp_2?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3346373102&pd_rd_wg=vc1BO&pf_rd_r=QA0WMDJVM8FBKX0QSCJF&pf_rd_s=desktop-rhs-carousels&pf_rd_t=301&pd_rd_i=B000051WQV&pd_rd_w=N2Wod&pf_rd_i=makita+cordless+hex+driver&pd_rd_r=f7009658-44f3-439f-89fd-67c263c676d7&ie=UTF8&qid=1517335008&sr=2
Yes, the Light bars come with a Receiver plug already in place, and the receiver will limit voltage output to 6V. However, for an Maximum brightness from your light bar, you would want to run directly to a 3S pack (approx 12V).
Do you guys sell adapters for this to plug to a battery? would be interested to buy also can these handle 4s? i run my slash mainly on 4s, and i want to know if i can just plug this into my receiver without damaging the ligh bar with too many volts
The Lights are rated at 12 volts which is just over 3S Voltage. They fine running directly from a 3S system, however we have never tested them from a 4S or equivalent voltage system, its possible that it could be too much voltage for the lights to handle, so I would not recommend it. Unfortunately we do not sell any adapters at this time.
Debe encajar, dependiendo del cuerpo que usted está poniendo en. Buena suerte y gracias por su apoyo. (It should fit, depending on the body you are putting it on. Good luck and thank you for your support.)
Sugiero la barra de luz de 5 pulgadas para scx10 honcho (I suggest the 5 inch light bar for scx10 honcho) www.prolineracing.com/performance-parts/5-super-bright-led-light-bar-kit-6v-12v-curved/
@3:35 I did the same for run thru the wires from the roof. But when I plug the wires back to the JR connector, it doesn't work. Any tips? TIA
Can you tell me the tools you are using? Is that a wireless drill?
in the video the Makita Hex Driver is used, here is a link:
www.amazon.com/Makita-DF012DSE-Lithium-Ion-Driver-Drill-Auto-Stop/dp/B071F4XTPK/ref=sr_1_5?ie=UTF8&qid=1517335008&sr=8-5&keywords=makita+cordless+hex+driver
personally I use the Hitachi and love it:
www.amazon.com/dp/B004Y74AU6/ref=sxr_sxwds-rbp_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3346373102&pd_rd_wg=vc1BO&pf_rd_r=QA0WMDJVM8FBKX0QSCJF&pf_rd_s=desktop-rhs-carousels&pf_rd_t=301&pd_rd_i=B004Y74AU6&pd_rd_w=N2Wod&pf_rd_i=makita+cordless+hex+driver&pd_rd_r=f7009658-44f3-439f-89fd-67c263c676d7&ie=UTF8&qid=1517335008&sr=1
There is also a DeWalt Version amongst others.www.amazon.com/dp/B000051WQV/ref=sxr_sxwds-rbp_2?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3346373102&pd_rd_wg=vc1BO&pf_rd_r=QA0WMDJVM8FBKX0QSCJF&pf_rd_s=desktop-rhs-carousels&pf_rd_t=301&pd_rd_i=B000051WQV&pd_rd_w=N2Wod&pf_rd_i=makita+cordless+hex+driver&pd_rd_r=f7009658-44f3-439f-89fd-67c263c676d7&ie=UTF8&qid=1517335008&sr=2
sweet video
hi， can this direct plug in receiver for a 6s or 8s power monster truck ？
Yes, the Light bars come with a Receiver plug already in place, and the receiver will limit voltage output to 6V. However, for an Maximum brightness from your light bar, you would want to run directly to a 3S pack (approx 12V).
@@ProLineRacingYT Thanks very much for the info，appreciate ， thanks u
Do you guys sell adapters for this to plug to a battery? would be interested to buy also can these handle 4s? i run my slash mainly on 4s, and i want to know if i can just plug this into my receiver without damaging the ligh bar with too many volts
The Lights are rated at 12 volts which is just over 3S Voltage. They fine running directly from a 3S system, however we have never tested them from a 4S or equivalent voltage system, its possible that it could be too much voltage for the lights to handle, so I would not recommend it.
Unfortunately we do not sell any adapters at this time.
ni modos ya encarge la de 6 pulgadas a ver si le queda a mi honcho axial
Debe encajar, dependiendo del cuerpo que usted está poniendo en. Buena suerte y gracias por su apoyo.
(It should fit, depending on the body you are putting it on. Good luck and thank you for your support.)
es de 6 pulgadas la barra de luz
Sí, esta es una barra de luz curvada de 6 pulgadas
(Yes this is a 6" Curved Light Bar)
Si le queda a un axial scx10 honcho
Gracias
Sugiero la barra de luz de 5 pulgadas para scx10 honcho
(I suggest the 5 inch light bar for scx10 honcho)
www.prolineracing.com/performance-parts/5-super-bright-led-light-bar-kit-6v-12v-curved/
I'm not wealthy enough to be putting holes in my RC vehicle.
Worst install video I’ve ever seen lol
I got dizzy watching. Good lord get a camera stand. Lol