If you want to know how I built the other shelves: ua-cam.com/video/XBauZyjNGxI/v-deo.html but is now the following winter and the lift is a back saver. Even this summer when I needed a place to get something like the fertilizer spreader out of the way fast this was a great thing to have. I will admit a few of you came up with some great ideas to improve the bridging from the lift to the original shelf that I am thinking about. Now I just need to build more shelves or another lift lol Thanks for watching.
Wow, as a mechanical engineer, it is over engineered, but it’s awesome. Well done. The use of the wall tracks is brilliant. And I love the planning. I try to teach the importance of planning to my engineering students at Michigan State. Me, I’m gonna keep tripping on the snow blower in my garage, swearing, and telling myself to build what you built. Thanks.
Being in Frankenmuth, Michigan myself, I can certainly see the value here as well. It’s either doing something like this or setting up a small out building behind my house.
Maybe build a small ramp to slide up in place when it's time to get the blower on and off the elevator? Turn the blower 90 degrees and roll it off and onto the platform? Also, and aluminum drip pan you can get at an auto parts store for underneath the blower so you can put it up wet. Nice build!
Several mechanical engineers post and not one questions the lack of a backup safety? Sorry. I'm not intending to troll but this concerns me... I'm going to stop reading comments now...
When i was taking a class to become a building inspector, the teacher said for the most part, individuals doing their own work, over build (better than code requirements. ). You have to watch out more with certain contractors. Not all but a higher % than individuals.
Bought this for my small back deck in the Eastern Sierra. ua-cam.com/users/postUgkxoHYZbq5g9fkcAtinlTqstNlje-UQkCHN We get A LOT of HEAVY snow so I was a bit skeptical but it was worth it! After the first storm of the year this has exceeded expectations! It throws snow very well, even 10-12” + that said the more it piles up the harder it is to maneuver the machine. It is exceptionally light weight and overall exactly what I was looking for. If you have a large amount of snow and a lot of area to clear, you may consider something with a drive engine to help maneuverability, but for decks, second stories, roofs etc, you can’t beat the light weight to great snow throwing ratio. Side note, the chute rotator is a bit flimsy and it initially didn’t seem to work, after a few uses it seems to have loosened up.
You may want to add an "overkill emergency" safety cable to your "manifold" something that comes taught with some form of shock absorbing properties just on the extremely unlikely situation where your winch line snaps. I am an overhead door technician and I see that 3/16 cable snap on a regular basis, heavier applications mind you. If it where me I would add a 1/4" cable to your winch mount where it is meant to double line and run the other end to your clew, through a compression spring so it can absorb some shock when your load reaches bottom in the event of your winch line failing. The rest of your system looks great. However the single winch line is holding all of the weight and if it decides not to do that anymore the whole system fails. Just my two bits. I built a similar system to raise and lower stairs but I have two 3/16" cables to raise my roughly 700lb stair/railing up. One would be sufficient by weight but if one fails my stairs won't fall.
@@mikerafone4736 Yah that would be the smart thing for sure. As a result of my line of work I'm forced to look at the extremely rare "what if" circumstances like what if a kid runs under it while it's operating, or a pet. And because of Murphy's Law, that would be when the unexpected would happen. I don't intend to rain on this dude's parade, what he did is freaking awesome. In fact I did something similar for raising and lowering my loft stairs in my garage. But I used two 1/4" cables that have a weight working load of 7000lb each, the likelihood of both cables failing at the same time is low. So in my case I've built in my "safety redundancy" that way.
As a rigger, it is hard to see Crosby clips saddling a dead horse. A quick link should not be side loaded. I would recommend changing out any Crosby that has a saddle on the none lifting side, and changing out that quick link for a rated shackle that you should also mouse(zip tie the pin to the shackle so it cant spin) also would recommend changing the turnbuckle for a jaw to jaw style and not an open ended end. Would also recommend checking the pulleys so that the cable isnt cutting them.
Loved this video. May I suggest that instead of installing/removing that extra bit of small shelving above the door every time you want to bring the blower down, you could have it mounted on solid hinges on the fixed shelving side and it folds up and locks in position or lays flat (your choice) when not in use. When needed it folds down and just 2 pins required from the lift to it as is now. Remove pins then fold up (and lock) for lift use. You don't lose any shelf space because the blower is now on the lift or down on the floor. Easy upgrade too I think.
I'm hadicapped and want to design my own elevator and I like to watch a lot of videos to learn how to build things too. I thought you did a great job. Thanks for the lesson sir.
Good job. Now, put the bridge on a piano hinge with a metal tab on the opposite lip. Then you can drop it like a gang plank, roll the blower into its parking place and life the bridge back up - voila - no more overhead pin pounding and the bridge stays in place. Don't have to worry about loosing it. Cool storage idea
I used the same $80 winch to make an elevator up to my attic; previously, I'd been hauling boxes up the folding ladder. The cost in materials and labor wasn't even close to what my medical expenses would be if I fell, so it was a good investment. Thanks!
You should make a video and tag me. I’d love to see what you built. I think it’s a good idea since I have the same issue and an elevator would come in handy.
Is your lift in the middle of your garage? Or is it on the wall with tracks like this video? That's a really good idea because I'm sick of going up in my garage attic with a ladder.
@@twistnshout3031 it’s between two joists and not against the wall. I like what the OP did with uninstructed but not an option for me. I angled the top of the platform so it rotates itself when it’s all the way up. I wish it were wider but I’m not going to cut my joists!
Yeah, I like it. I did the same thing in my garage just a little bigger hoist. What I did and would advise is this. Hang up the hand held and use a remote for your setup. Really convenient, and easy to wire.
Appreciate the dedication to this project. I know when it comes to projects we can over engineer solutions. I think this is one of those times. All of this just save some space and put the snowblower overhead, lol. I love it.
I'm converting a box truck into an RV and to save space I've been trying to figure out a system to raise the bed to the ceiling when not in use and this is the PERFECT solution for what I'm doing! Thank you for sharing this online!!😄✨
This is insane - your install is a mechanical marvel. I too live in Ohio and feel your pain. I just bought one of these lifts and like you, I also are YouTubing before I design my setup. I've had a dumb waiter in my garage for decades using pulleys and a manual boat wench on the wall. It works good but now I'm upgrading it. I probably will not be replicating the complexity of your design but have learned a few tricks from your effort. Thank you for sharing.
Make a few mods and add another shelf to the lift and make it ALSO become a trash compactor! Suggest adding a 1x2 stop to prevent blower from going off the edge if (somehow) it gets pushed too far to the right.
Awesome build one piece of advice one of the cables has the cable clamps on backwards. Rule of thumb never saddle a dead horse or in other words the saddle of the clamp goes on the live end of the cable
Super cool. I have a loft that I built in my barn and it takes three people to get all the outside furniture up and in for the winter and out and down for the summer. I really need to build something like this. Thank you for sharing.
As someone has worked in the Lift (elevator) and the crane industry, residential construction and as a general handyman myself. it’s an awesome build and yes over engineered as you said, but that never hurt anyone supposedly. I’m just glad I don’t need a snowblower where I live! NSW in Oz
@@brentscott2509 Not everyone can have a shed. Not everyone wants a shed. Not every idea you won't implement is bad. This project addresses a specific problem, and it does it well. There's no need to poopoo it just because it isn't what you would do.
@@watcherofwatchers LoL ok. If you think this is the most practical solution have at it. My comment was quite mild on my feelings so maybe you need to lighten up a bit
Very well done. I have plans to do similar down the line in my shed. In watching your build, I realized the turnbuckle might be better at the platform end. Additionally, you can keep it in the lift if you put a support system underneath it. A simple bracket system could work. Since you have the foundation limiting how far it can come down you can make a shelf underneath the lift for other winter only items. Gloves, boots, shovels or even rock salt if you use it. Looks perfect for what you wanted out of it but inspirational for those of us that have different setups and needs. Thanks for sharing.
It is always cool seeing you supporting other channels by wearing their apparel. Especially FF Construction. I got my mullet and asphalt! I enjoy your video and their content. Keep it up 👍🏽!
I can't see the wire rope clips on the clew, but atleast some of the one on the platform are on backwards. "Never saddle a dead horse" the saddle should never be placed on the dead end of the rope. The lift looks great though, im going to have to build one for myself.
Nice! I used the same Harbor Freight winch to lift the hardtop off my Jeep. I used a pully to double the lifting capacity and cut the speed in half to make it easier to align when reinstalling the top. For storage, I just let the top hang up against the ceiling.
Your comment about getting to your garage spring don't worry about it my house was built 1958 and I've never touched the garage door spring LOL.. you're good to go !!!!
For the future, just build another rectangle the size of your base. Hook one wire to four at the top rectangle, then hang the wires down to the base. Forget about all the stop blocks in the attic, which you could've woven to gain more force that you really don't need. Double your wench pully to double the force. move the wench so it directly hangs to the center of your base only now it's elevate because you have a box frame. I would've pulled that away from the wall so it goes all the way to the ground. If you can weld there is an even easier way. You did a nice job on the project and it looks really nice. Look how they wire pulleys for kayks. You pull ONE rope. In your case you could've hooked your pully to one wire. Also that 10 x 2 would give you more strength by placing it laterally. "Trusses" are not as strong as you think pulling down on them.
As someone who sells rigging for a living get the crimping ferrules. I've seen cable clamps fail and it's never pretty! Safety first my friend. This looks awesome!
Ryan really just drilled holes in wood and metal on his carpet for this video. Also I really just got a Skippy Peanut Butter ad during this. Keep up the video man, love it.
Best DIY Instruction I've seen so far; informative and concise. Though the design is a little complicated you made it easy to understand. I really enjoy watching it. Congratulations.
Great project. Nice and clean, in the attic install was a good idea. I did something similar, I stored a 16' Hobie Cat (400lbs small boat) up in the air. I've sold the cat since so now I store my kayak trailer (250lbs) up and out of the way. I also use a Princess Auto (Canadian version of Harbor Freight) hoist, great little things. Only mod I would do is tape up the ends of the cable so you poke yourself.
Couple of ideas: 1.Turnbuckles at the platform instead of attic for easier adjustment access. 2.Use a French Cleat for connecting the plank to eliminate bolting it in. I’m a fellow 3D solids modeler and reality capture expert from way back. Great video and idea, thank you!
Nice job. Well done. The one item that initially caught my eye was the D-Ring that connects the lift cable to the spreader bar. I think I would have made a triangular shaped substitute from plate steel or some other connection, but for the loads you are lifting it should never be an issue.
I certainly wouldn’t worry about the garage door spring. You just built a cool winch system. You’ll figure out how to address the spring. Great job! My snow blower and generator sit on the floor as well. May use a portion of your idea to stack them on top of each other.
Great job! Very clean done. Not sure if anybody suggested, but if you want to avoid lifting that snowblower when platform comes all the way down you could shorten wall railings so platform gets detached from it when it comes down; then you would pull your platform with one hand until it clears that bottom step on the wall and start lowering platform further until it reaches floor. Just my 2 cents :). Cheers, Mike
This would be great for storing seasonal items such as in winter store the lawn mower (push type only) up there and switch down in spring when needed again. Store the snow blower under the lift in winter and the lawn mower there spring through fall. Sounds like a great project.
Subscribed! After watching Stud Pack's garage shelve video this was a recommendation. Been thinking about a lift or hoist for the shop at the new house. Then realized I've already watched your monitor vids. I appreciate creators that do research and send it. Props for not skipping steps and chosing to keep a higher level of quality.
Great idea!!! I think the most practical thing is to use your shelf for something else and when storing your snow blower just crank up your lift and leave it on the lift platform. I did not hear you were going to use the lift for anything else. Another addition you might build is another shelf for the other side of the lift platform. Great project!!!! Nice lift design!!!!
Great idea, courageous design and execution. In future, know this: Your shelves are overbuilt by half. Use 3/8 plywood and 2x2 or 1x4 framing and glue. Glue in blocks where you want an eyebolt. Everything will be easier and nothing will break.
I really like this. The only thing I can think of that I might have done differently is made the extension that goes between the shelf and the lift a 1/4 inch shorter and then you could leave it up attached to the shelf and only have to deal with 2 things to put in and take out when using it or letting the lift back down. Great job!
Love the idea. Have a manual system to lift a kayak to the ceiling using ropes, but this is simple and love the electric winch, I'll have to consider updating my lift. Wires are a good update too, no twist compared to rope. Thanks for taking the time to post the video. That was nicely done too!
I love that idea. Watching the video and pausing it here and there, I think permanently lengthening the snowblower platform to the corner of the doorframe to you house will save you the time and effort of installing and removing that little bridge unit. I'm sure a one inch gap between the lift and the stationary platform is easily crossed by the snowblower. I am also envisioning that you would be keeping your lawnmower up in that space during winter. One thought I had, while I was noticing your garage door rails, is would a garage door opener motor be powerful enough and simpler to set up in the attic space? One thing I might have done with the up and down switch is to permanently mount it to the wall instead of having it hang around all the time. One way that you could make more mileage from your life is as a service platform. Get your machine up to waist or shoulder height and you can comfortably do repairs. I just fixed my snowblower by sitting and lying on the cold floor like an animal. Wish I had your lift.
Good idea, I think using a pulley and wrapping the cable around the pulley (maybe even used like a used garage door pulley) or something similiar would take up less space in the attic. Your way works, but just thinking of less parts/smaller area required.
Good idea and effort. Just one thing. The bridge platform is pretty cumbersome. I think a simple drop in plate from the top or a hinged flap would save all that effort pulling pins and clips out all the time.
Tom G, WV Thank you for this posting, I'm going to need this type of lift for my new lawn cutter, it needs to be in up and away from mice eating the electric wires. Your video is looking great for what I need! thank you
Great idea! I want to make something similar to store my rolling saws in the loft of my new shed. I'd suggest drilling some 1/2" holes through the sides of the struts near the top. You can stick your pins through there to store them, and also act as safeties if the wires fail.
Nice design and build. Thinking of putting Superstrut all the way across the width of my garage to hang winch, and this would enable me to have several small detachable platforms for numerous lifted items and storage.
What a great idea!!! I've been looking at elevator lifts to the attic but never thought of shelving big toys. Gave me an idea to have atv on floor, 1st level jet ski and top level snowblower and possibly a door to attic for additional stuff.
Just those simple metal kit things that clip on when you want them and off when you don't Can make the ramp as long as you need it.@@ThatTechTeacher427
Great video, watching this video gave me a great idea to build a foldable awning over my back patio. I want to be able to fold it down for warmer sunny days but don't want a cloth awning. One with a wooden frame and metal roof.
Interesting, and a suggestion now that you are that far along: Use the 'elevator' section to access additional non-moving shelves, like the one where you store your snowblower. Add another non-moving shelf to the right side to hold something large, ungainly and heavy like the snowblower. Use the moveable shelf to get it up and down as needed. I can see you storing something heavy on the moveable shelf as well. I would switch out the snowblower and a lawn mower depending on the season. Good Luck!
Great video, I would put the turn buckles on the platform and the cable clamps up in the attic. That you could load the platform leave it overnight to help stretch the cable and level while standing in the garage. I would have tried to run the track down just above the floor put door/window shims behind the track. You could also make a ramp to roll the snow blower off.
If you are open to suggestion, I would take a sheet of plywood that is grooved like a table saw. Put low profile wheels to make it slide easy as it transitions across the platforms to the lift. Should make loading and unloading easier and reduce the change of masking marks on the walls. Love the idea and I will likely mimic the idea. Keep posting.
Dude this is awesome, I have a friend who's disabled and can't lit herself on her feet after she falls, I'm going to try to use this as a template to make a floor lift so she can get back up easier
Very clever! I long for challenges just like this. My home is full of ingenuity and out of the ordinary ideas. Great job and terrific “how to” video. I’m looking forward to more of the same well thought out solutions.
Put recess able transfer balls in the plywood and slide the snowblower on a piece plywood like an airplane container. Great job. I like the clean look also
A piece of plywood with a pair of door hinges mounted to the right hand side (when looking at the house entry door) of the 'elevator' would make a handy ramp to roll the blower onto the platform.
Just watched this video. Pretty cool stuff,now if i can get you to come to my house build and install one I'd be set too. Good for storing the stand up jet ski,3 wheel atc etcetera etcetera. ✌
Absolutely awesome design. Jay Bates had just done an oversized shop lift build, and I was curious to see something for a more "real" garage build. Not only is the timing perfect, but you're lay out is very straight forward. Great work as always, and keep up the excellent content!
Very good, You could mount motor below platform and would be a bottom drive system with one pulley/divertor directly over platform in loft space. Track system with unistrut is great.....One rope would be sufficient with a spanned bracket fitted onto front edge of platform, easier to maintain and good to watch if motor working hard etc. 👍
![Homemade Shop Attic Elevator [MAKES ME JEALOUS!] DIY Garage Elevator How To](http://i.ytimg.com/vi/ltpFF-dPEzw/mqdefault.jpg)
![Homemade Shop Attic Elevator [MAKES ME JEALOUS!] DIY Garage Elevator How To](/img/tr.png)
If you want to know how I built the other shelves: ua-cam.com/video/XBauZyjNGxI/v-deo.html but is now the following winter and the lift is a back saver. Even this summer when I needed a place to get something like the fertilizer spreader out of the way fast this was a great thing to have. I will admit a few of you came up with some great ideas to improve the bridging from the lift to the original shelf that I am thinking about. Now I just need to build more shelves or another lift lol Thanks for watching.
Nice.
Wow, as a mechanical engineer, it is over engineered, but it’s awesome. Well done. The use of the wall tracks is brilliant. And I love the planning. I try to teach the importance of planning to my engineering students at Michigan State. Me, I’m gonna keep tripping on the snow blower in my garage, swearing, and telling myself to build what you built. Thanks.
Big band saw needs this to lift it to table height for its horizontal position.
Being in Frankenmuth, Michigan myself, I can certainly see the value here as well. It’s either doing something like this or setting up a small out building behind my house.
Maybe build a small ramp to slide up in place when it's time to get the blower on and off the elevator? Turn the blower 90 degrees and roll it off and onto the platform? Also, and aluminum drip pan you can get at an auto parts store for underneath the blower so you can put it up wet. Nice build!
Several mechanical engineers post and not one questions the lack of a backup safety?
Sorry. I'm not intending to troll but this concerns me... I'm going to stop reading comments now...
When i was taking a class to become a building inspector, the teacher said for the most part, individuals doing their own work, over build (better than code requirements. ). You have to watch out more with certain contractors. Not all but a higher % than individuals.
Bought this for my small back deck in the Eastern Sierra. ua-cam.com/users/postUgkxoHYZbq5g9fkcAtinlTqstNlje-UQkCHN We get A LOT of HEAVY snow so I was a bit skeptical but it was worth it! After the first storm of the year this has exceeded expectations! It throws snow very well, even 10-12” + that said the more it piles up the harder it is to maneuver the machine. It is exceptionally light weight and overall exactly what I was looking for. If you have a large amount of snow and a lot of area to clear, you may consider something with a drive engine to help maneuverability, but for decks, second stories, roofs etc, you can’t beat the light weight to great snow throwing ratio. Side note, the chute rotator is a bit flimsy and it initially didn’t seem to work, after a few uses it seems to have loosened up.
You may want to add an "overkill emergency" safety cable to your "manifold" something that comes taught with some form of shock absorbing properties just on the extremely unlikely situation where your winch line snaps. I am an overhead door technician and I see that 3/16 cable snap on a regular basis, heavier applications mind you. If it where me I would add a 1/4" cable to your winch mount where it is meant to double line and run the other end to your clew, through a compression spring so it can absorb some shock when your load reaches bottom in the event of your winch line failing. The rest of your system looks great. However the single winch line is holding all of the weight and if it decides not to do that anymore the whole system fails. Just my two bits. I built a similar system to raise and lower stairs but I have two 3/16" cables to raise my roughly 700lb stair/railing up. One would be sufficient by weight but if one fails my stairs won't fall.
He easily lifted the blower, Just keep clear when operating
@@mikerafone4736 Yah that would be the smart thing for sure. As a result of my line of work I'm forced to look at the extremely rare "what if" circumstances like what if a kid runs under it while it's operating, or a pet. And because of Murphy's Law, that would be when the unexpected would happen. I don't intend to rain on this dude's parade, what he did is freaking awesome. In fact I did something similar for raising and lowering my loft stairs in my garage. But I used two 1/4" cables that have a weight working load of 7000lb each, the likelihood of both cables failing at the same time is low. So in my case I've built in my "safety redundancy" that way.
That’s a lotta damn work for snow blower storage
As a rigger, it is hard to see Crosby clips saddling a dead horse. A quick link should not be side loaded. I would recommend changing out any Crosby that has a saddle on the none lifting side, and changing out that quick link for a rated shackle that you should also mouse(zip tie the pin to the shackle so it cant spin) also would recommend changing the turnbuckle for a jaw to jaw style and not an open ended end. Would also recommend checking the pulleys so that the cable isnt cutting them.
Loved this video. May I suggest that instead of installing/removing that extra bit of small shelving above the door every time you want to bring the blower down, you could have it mounted on solid hinges on the fixed shelving side and it folds up and locks in position or lays flat (your choice) when not in use. When needed it folds down and just 2 pins required from the lift to it as is now.
Remove pins then fold up (and lock) for lift use. You don't lose any shelf space because the blower is now on the lift or down on the floor. Easy upgrade too I think.
Yup an awesome suggestion
I'm hadicapped and want to design my own elevator and I like to watch a lot of videos to learn how to build things too. I thought you did a great job. Thanks for the lesson sir.
Good job. Now, put the bridge on a piano hinge with a metal tab on the opposite lip. Then you can drop it like a gang plank, roll the blower into its parking place and life the bridge back up - voila - no more overhead pin pounding and the bridge stays in place. Don't have to worry about loosing it. Cool storage idea
Or make the shelf larger and forget the bridge idea.
More power to you. I sometimes build things because I can using my home workshop and welder. As long as your satisfied, that's all that matters.
I love the fact that his workshop is on his living room floor.
Wants to keep the garage clean LOL
@@bradcummings802 yeah with all those metal shavings..
I used the same $80 winch to make an elevator up to my attic; previously, I'd been hauling boxes up the folding ladder. The cost in materials and labor wasn't even close to what my medical expenses would be if I fell, so it was a good investment. Thanks!
You should make a video and tag me. I’d love to see what you built. I think it’s a good idea since I have the same issue and an elevator would come in handy.
Is your lift in the middle of your garage? Or is it on the wall with tracks like this video? That's a really good idea because I'm sick of going up in my garage attic with a ladder.
@@twistnshout3031 it’s between two joists and not against the wall. I like what the OP did with uninstructed but not an option for me. I angled the top of the platform so it rotates itself when it’s all the way up. I wish it were wider but I’m not going to cut my joists!
Yeah, I like it. I did the same thing in my garage just a little bigger hoist. What I did and would advise is this. Hang up the hand held and use a remote for your setup. Really convenient, and easy to wire.
Appreciate the dedication to this project. I know when it comes to projects we can over engineer solutions. I think this is one of those times. All of this just save some space and put the snowblower overhead, lol. I love it.
Thanks I appreciate the understanding!
I'm converting a box truck into an RV and to save space I've been trying to figure out a system to raise the bed to the ceiling when not in use and this is the PERFECT solution for what I'm doing! Thank you for sharing this online!!😄✨
Hope it works
This is insane - your install is a mechanical marvel. I too live in Ohio and feel your pain. I just bought one of these lifts and like you, I also are YouTubing before I design my setup. I've had a dumb waiter in my garage for decades using pulleys and a manual boat wench on the wall. It works good but now I'm upgrading it. I probably will not be replicating the complexity of your design but have learned a few tricks from your effort. Thank you for sharing.
You could add another shelf to the right, and put a push mower on that one. Nice work.
Haha
Make a few mods and add another shelf to the lift and make it ALSO become a trash compactor!
Suggest adding a 1x2 stop to prevent blower from going off the edge if (somehow) it gets pushed too far to the right.
Even your neon shirt cannot outshine your bright personality
Wow! lol thanks!!!
I have one of those winches nib from 15 years ago. This video is the epiphany I've been waiting for... 🤩
Haha awesome
This thing is a straight up engineering marvel. So satisfying to see how clean it worked out!
Awesome job!
Thanks!
Awesome build one piece of advice one of the cables has the cable clamps on backwards. Rule of thumb never saddle a dead horse or in other words the saddle of the clamp goes on the live end of the cable
This is just fabulous. Well designed, well built and well executed. I can only imagine what else you have planned to hoist up into your garage!
Super cool. I have a loft that I built in my barn and it takes three people to get all the outside furniture up and in for the winter and out and down for the summer. I really need to build something like this. Thank you for sharing.
I can tell by your wardrobe that you are a man of good taste. "HELL YEAH, BROTHER!!"
Looks like the perfect remedy for lawnmower maintenance. Nicely done.
Hoping it helps
Whoa! With that concept and design, you could literally make a mini elevator inside your home!
GREAT VIDEO. VERY COOL. PUT EDGES ON THE SHELVES SO STUFF DON''T ROLL OFF.
As someone has worked in the Lift (elevator) and the crane industry, residential construction and as a general handyman myself. it’s an awesome build and yes over engineered as you said, but that never hurt anyone supposedly. I’m just glad I don’t need a snowblower where I live! NSW in Oz
I appreciate the idea of an elevated shelf but the complexity and cost of this makes me wonder about the practicality of this concept.
It could be very practical to enable the use of storage when you have 12 ft ceilings in the garage. This concept gives me a lot of ideas.
if it keeps crap off of the floor - it IS worth it !!!!
For the time and money could have bought a shed. Neat gadget but that’s about it
@@brentscott2509 Not everyone can have a shed. Not everyone wants a shed. Not every idea you won't implement is bad. This project addresses a specific problem, and it does it well. There's no need to poopoo it just because it isn't what you would do.
@@watcherofwatchers LoL ok. If you think this is the most practical solution have at it. My comment was quite mild on my feelings so maybe you need to lighten up a bit
Very well done. I have plans to do similar down the line in my shed.
In watching your build, I realized the turnbuckle might be better at the platform end. Additionally, you can keep it in the lift if you put a support system underneath it. A simple bracket system could work.
Since you have the foundation limiting how far it can come down you can make a shelf underneath the lift for other winter only items. Gloves, boots, shovels or even rock salt if you use it.
Looks perfect for what you wanted out of it but inspirational for those of us that have different setups and needs. Thanks for sharing.
This video lifted my spirit 😂
Awesome to hear! Thanks!
Wow that’s amazing. I’ve only seen this 25 times over the last 3 yrs
It is always cool seeing you supporting other channels by wearing their apparel. Especially FF Construction. I got my mullet and asphalt! I enjoy your video and their content. Keep it up 👍🏽!
I can't see the wire rope clips on the clew, but atleast some of the one on the platform are on backwards. "Never saddle a dead horse" the saddle should never be placed on the dead end of the rope. The lift looks great though, im going to have to build one for myself.
Nice! I used the same Harbor Freight winch to lift the hardtop off my Jeep. I used a pully to double the lifting capacity and cut the speed in half to make it easier to align when reinstalling the top. For storage, I just let the top hang up against the ceiling.
Your comment about getting to your garage spring don't worry about it my house was built 1958 and I've never touched the garage door spring LOL.. you're good to go !!!!
This is an Awesome Idea. I lug Snow Tires up a Ladder to the Top shelf. SAFTEY FIRST, and a Back Saver!
@Jake Banks Yes, I hate Tech, but some times it comes in handy :)
Anything worth engineering is worth over-engineering. Nicely done.
For the future, just build another rectangle the size of your base. Hook one wire to four at the top rectangle, then hang the wires down to the base. Forget about all the stop blocks in the attic, which you could've woven to gain more force that you really don't need. Double your wench pully to double the force. move the wench so it directly hangs to the center of your base only now it's elevate because you have a box frame. I would've pulled that away from the wall so it goes all the way to the ground. If you can weld there is an even easier way. You did a nice job on the project and it looks really nice. Look how they wire pulleys for kayks. You pull ONE rope. In your case you could've hooked your pully to one wire. Also that 10 x 2 would give you more strength by placing it laterally. "Trusses" are not as strong as you think pulling down on them.
All I can say to you is---WHAT a NICE JOB--you should be proud !!
Thanks I appreciate it!
As someone who sells rigging for a living get the crimping ferrules. I've seen cable clamps fail and it's never pretty! Safety first my friend. This looks awesome!
Ryan really just drilled holes in wood and metal on his carpet for this video. Also I really just got a Skippy Peanut Butter ad during this. Keep up the video man, love it.
Best DIY Instruction I've seen so far; informative and concise. Though the design is a little complicated you made it easy to understand. I really enjoy watching it. Congratulations.
Great project. Nice and clean, in the attic install was a good idea. I did something similar, I stored a 16' Hobie Cat (400lbs small boat) up in the air. I've sold the cat since so now I store my kayak trailer (250lbs) up and out of the way. I also use a Princess Auto (Canadian version of Harbor Freight) hoist, great little things. Only mod I would do is tape up the ends of the cable so you poke yourself.
Great idea and great video. Small point: If those are GRK screws used for the base, they don’t need pre-drilled holes, they “ drill “ their own holes.
Undoubtedly one of the most professional videos I have ever watched on UA-cam.
New to UA-cam?
@@paulr2372 Absolutely not and I appreciate high quality instructional videos such as this.
Bro, this is the ULTIMATE DIY project. Awesome.
Couple of ideas:
1.Turnbuckles at the platform instead of attic for easier adjustment access.
2.Use a French Cleat for connecting the plank to eliminate bolting it in.
I’m a fellow 3D solids modeler and reality capture expert from way back.
Great video and idea, thank you!
Nice job. Well done. The one item that initially caught my eye was the D-Ring that connects the lift cable to the spreader bar. I think I would have made a triangular shaped substitute from plate steel or some other connection, but for the loads you are lifting it should never be an issue.
Cable clamps on the lift.. saying goes, never saddle a dead horse…
I certainly wouldn’t worry about the garage door spring. You just built a cool winch system. You’ll figure out how to address the spring. Great job! My snow blower and generator sit on the floor as well. May use a portion of your idea to stack them on top of each other.
This is similar to my platform lift in my garage that I always use. I’m so glad I made it!
This is exactly what I need. being in Colorado, can't wait til summer
Great job! Very clean done. Not sure if anybody suggested, but if you want to avoid lifting that snowblower when platform comes all the way down you could shorten wall railings so platform gets detached from it when it comes down; then you would pull your platform with one hand until it clears that bottom step on the wall and start lowering platform further until it reaches floor. Just my 2 cents :). Cheers, Mike
Neat! Easy peasy fold out ramp to make it past that last section.
This would be great for storing seasonal items such as in winter store the lawn mower (push type only) up there and switch down in spring when needed again. Store the snow blower under the lift in winter and the lawn mower there spring through fall. Sounds like a great project.
Subscribed!
After watching Stud Pack's garage shelve video this was a recommendation.
Been thinking about a lift or hoist for the shop at the new house.
Then realized I've already watched your monitor vids.
I appreciate creators that do research and send it.
Props for not skipping steps and chosing to keep a higher level of quality.
I love geeking out on projects. You did an awesome job. 👌🏽
Great idea!!! I think the most practical thing is to use your shelf for something else and when storing your snow blower just crank up your lift and leave it on the lift platform. I did not hear you were going to use the lift for anything else. Another addition you might build is another shelf for the other side of the lift platform. Great project!!!! Nice lift design!!!!
Great idea, courageous design and execution. In future, know this: Your shelves are overbuilt by half. Use 3/8 plywood and 2x2 or 1x4 framing and glue. Glue in blocks where you want an eyebolt. Everything will be easier and nothing will break.
Thanks I like the overbuilt part.
I really like this. The only thing I can think of that I might have done differently is made the extension that goes between the shelf and the lift a 1/4 inch shorter and then you could leave it up attached to the shelf and only have to deal with 2 things to put in and take out when using it or letting the lift back down. Great job!
Pretty ingenious sir. Nice job, as most people wouldn't think to even attempt it.
Awesome build!
I would've hinged the bridge on the storage side so that it folds down to the lift side
Thanks and that's a good idea
Nice! I felt fortunate if my husband would, after using the snowblower, park it on a sheet of cardboard so it wouldn’t leave rust marks on the floor!
Love the idea. Have a manual system to lift a kayak to the ceiling using ropes, but this is simple and love the electric winch, I'll have to consider updating my lift. Wires are a good update too, no twist compared to rope. Thanks for taking the time to post the video. That was nicely done too!
I love that idea. Watching the video and pausing it here and there, I think permanently lengthening the snowblower platform to the corner of the doorframe to you house will save you the time and effort of installing and removing that little bridge unit. I'm sure a one inch gap between the lift and the stationary platform is easily crossed by the snowblower. I am also envisioning that you would be keeping your lawnmower up in that space during winter.
One thought I had, while I was noticing your garage door rails, is would a garage door opener motor be powerful enough and simpler to set up in the attic space? One thing I might have done with the up and down switch is to permanently mount it to the wall instead of having it hang around all the time.
One way that you could make more mileage from your life is as a service platform. Get your machine up to waist or shoulder height and you can comfortably do repairs. I just fixed my snowblower by sitting and lying on the cold floor like an animal. Wish I had your lift.
This is so amazing I don’t have words to do it justice! I love seeing ingenuity like this!
Good idea, I think using a pulley and wrapping the cable around the pulley (maybe even used like a used garage door pulley) or something similiar would take up less space in the attic. Your way works, but just thinking of less parts/smaller area required.
Dude you made this look easy. Amazing job.
Good idea and effort. Just one thing. The bridge platform is pretty cumbersome. I think a simple drop in plate from the top or a hinged flap would save all that effort pulling pins and clips out all the time.
This would be a good start for a design on storing my kids power wheels. Thanks
Look at the fleximounts gl1. Pretty affordable ceiling lift system at 279
Tom G, WV
Thank you for this posting, I'm going to need this type of lift for my new lawn cutter, it needs to be in up and away from mice eating the electric wires.
Your video is looking great for what I need! thank you
Great idea! I want to make something similar to store my rolling saws in the loft of my new shed.
I'd suggest drilling some 1/2" holes through the sides of the struts near the top. You can stick your pins through there to store them, and also act as safeties if the wires fail.
Do it for Dale! Great video and I’m lovin’ the Freedom Factory shirts in your videos!
Nice design and build. Thinking of putting Superstrut all the way across the width of my garage to hang winch, and this would enable me to have several small detachable platforms for numerous lifted items and storage.
Snow May melt by the time to go through all that trouble to get it down. Lol. Kidding. Great job. Pretty cool actually.
Ok video. You go up to attic to adjust it at the manifold. Just brilliant hahaha.
What a great idea!!! I've been looking at elevator lifts to the attic but never thought of shelving big toys. Gave me an idea to have atv on floor, 1st level jet ski and top level snowblower and possibly a door to attic for additional stuff.
That sounds awesome, a bit heavier than my simple snow blower but very cool
Love it. I'd make short ramps that snap on the end to stop the lifting.
Ya that would make this much better
Just those simple metal kit things that clip on when you want them and off when you don't Can make the ramp as long as you need it.@@ThatTechTeacher427
Great video, watching this video gave me a great idea to build a foldable awning over my back patio. I want to be able to fold it down for warmer sunny days but don't want a cloth awning. One with a wooden frame and metal roof.
Interesting, and a suggestion now that you are that far along: Use the 'elevator' section to access additional non-moving shelves, like the one where you store your snowblower. Add another non-moving shelf to the right side to hold something large, ungainly and heavy like the snowblower. Use the moveable shelf to get it up and down as needed. I can see you storing something heavy on the moveable shelf as well. I would switch out the snowblower and a lawn mower depending on the season. Good Luck!
Great video, I would put the turn buckles on the platform and the cable clamps up in the attic. That you could load the platform leave it overnight to help stretch the cable and level while standing in the garage. I would have tried to run the track down just above the floor put door/window shims behind the track. You could also make a ramp to roll the snow blower off.
If you are open to suggestion, I would take a sheet of plywood that is grooved like a table saw. Put low profile wheels to make it slide easy as it transitions across the platforms to the lift. Should make loading and unloading easier and reduce the change of masking marks on the walls. Love the idea and I will likely mimic the idea. Keep posting.
I appreciate the time you took to make a quality video. My Dad used to store our Sunfish on the garage rafters using a sling, hook, rope, and a winch.
Bro this was one of the best diy videos on youtube ...
Dude this is awesome, I have a friend who's disabled and can't lit herself on her feet after she falls, I'm going to try to use this as a template to make a floor lift so she can get back up easier
Very clever! I long for challenges just like this. My home is full of ingenuity and out of the ordinary ideas. Great job and terrific “how to” video. I’m looking forward to more of the same well thought out solutions.
Put recess able transfer balls in the plywood and slide the snowblower on a piece plywood like an airplane container. Great job. I like the clean look also
Only thing I would have done !! Build it to the center of the Gar !! Then you could plywood the joist. N had attic storage !! GREAT JOB !!
Well done! I laughed out loud in appreciation when I saw your success.
@4:25, just a subtle flex of the pc and the very good boy
Well engineered. I wouldn't do that if the trusses were going in the other direction.
Looks like another shelf on the other side is next!
Thanks and I agree. I cant say that I havent thought about it lol
A piece of plywood with a pair of door hinges mounted to the right hand side (when looking at the house entry door) of the 'elevator' would make a handy ramp to roll the blower onto the platform.
Yep, that was my first thought too, just fasten the 2x4’back on each shelf end , then hinge the plywood piece on the platform.
Great video! I enjoined all the tech talk, implementation, nice! Also, nice shirt, can tell you channeled your inner freedom self doing the lift.
Good job. Putting the turnbuckles at the bottom, at the shelf, would have made it easier to fine turn the platform level.
True but I really didnt want to look at them haha my OCD
Just watched this video. Pretty cool stuff,now if i can get you to come to my house build and install one I'd be set too. Good for storing the stand up jet ski,3 wheel atc etcetera etcetera. ✌
For someone starting with nothing, the lift platform can be the storage shelf, eliminating moving something back and forth overhead.
Homie s working on the carpet and in his socks. Baller
Absolutely awesome design. Jay Bates had just done an oversized shop lift build, and I was curious to see something for a more "real" garage build. Not only is the timing perfect, but you're lay out is very straight forward. Great work as always, and keep up the excellent content!
Thanks! I watched his video when I was about half way done with mine, his was pretty impressive! Thanks for the kind words!
Working on carpet. Brilliant!
Very good, You could mount motor below platform and would be a bottom drive system with one pulley/divertor directly over platform in loft space. Track system with unistrut is great.....One rope would be sufficient with a spanned bracket fitted onto front edge of platform, easier to maintain and good to watch if motor working hard etc. 👍