Technicolor TG582n Firmware Upgrade
Вставка
- Опубліковано 30 вер 2024
- Sometimes a firmware upgrade allows using a branded/locked down TG582n router with any ISP. This video shows the upgrade process.
Kindly see ahmedfarazch.bl... for the details!
Video Captured by Open Broadcaster Software
Authentification failure?? I input the right password and name and still can't connect
+Jonas Amokacis There might be more information in the Event Logs section as to why the connection failed! If you can find it, it'll help diagnose the problem.
Other than that, one can only check the configuration again.
Sometimes ISPs use MAC address binding to only allow certain devices to connect and using another router involves either cloning the MAC address of allowed device or asking the ISP to bind the new mac address. You might confirm this from your ISP.
Regards,
ahmedfarazch
could U find oem firmware for Thomson tg585 v8 locked to Qtel? Thanks.
hi, when i select the firmware DANT-1 it show that is no compatible. What can i do?
Hello!
There are three versions of TG582n such that yours might not support DANT-1 firmware. Even if it is a DANT-1 variant, there can be restrictions on updating the firmware put on by the manufacturer for the ISP. Kindly, confirm the variant and ISP by logging into the router!
Regards,
ahmedfarazch
Hello , Nice video . I have a question , is there QoS in this firmware update?
Hello!
Thanks for your input! As far as QoS is concerned, it can be configured via the CLI using the reference guide: 1drv.ms/b/s!Av27A1CfPo_XqibsPkOGNQNahw_A
though it seems to be difficult to do so without an example:
web.archive.org/web/20160718131759/npr.me.uk/ipqos.html
(sadly, npr.me.uk seems to be defunct)
Hope this helps!
Regards,
ahmedfarazch
You can do QoS through telnet on all firmware versions. I could link you a guide if you want.
gracias amigo
Are you doing this on windows 7
+Neptune Hello!
Yes, using Windows 7 is recommended for updating firmware for TG582n. In the video, Windows 7 is being run on Windows 10 as a virtual machine using VirtualBox with bridged networking.
Hope this helps!
Regards,
ahmedfarazch
ahmedfarazch will this work on Windows 10
+Neptune Hello Again!
It can work on Windows 10 by using the compatibility troubleshooter (depending upon the build of win 10, the process varies) and by using the static IP address. It's just that Microsoft is rebuilding the networking stack for Win 10 and currently it seems to have a mind of its own.
Regards,
ahmedfarazch
Hi Ahmed, I have a Dant-T model with 10.2.6.B FW (Tiscali Provider). In your onedrive there are 2 firmware, speedtouch 10.2.0B and PN TG582n R10.2.2.9 DEMO 2012 08 10 1353.bin. What firmware i have to install?
Hello!
The firmware 10.2.6.B seems to be newer than the ones available looking at the version string alone. However, the forum thread at www.hwupgrade.it/forum/showthread.php?t=2562978&page=7&styleid=15 should help by taking a look at the feedback from people using the different firmware versions.
Hope this helps!
Regards,
ahmedfarazch