thnks for this no crap, talk business video....m installing another light in one of my rooms with a separate switch and this is exactly what i m looking for.....much appreciate it man hi5!! ...btw m in Canada as well...
Wtf?! That current finder you have at the beginning, I’ve never even heard that something like that existed.. that doohickey is gonna make my life sooooooo much easier. Best part is it’s only 7am and I’ve already gotten all my learning in for the day, today is an amazing day :)
Hi Nic, I have a light switch outside a closet that turns the light on/off inside the closet. The power source comes from the light fixture inside the closet to the switch outside the closet. The white wire at the switch is the hot. I want to add an independent light with switch outside the closet using the power from the closet light switch and not the light box. Can you do that in Canada?
Those circuit breaker finders are great but yeah they can be kind of vague and a pain. I usually take the front of the panel off so I can bring the tester up close to the hot leads coming off each breaker and more clearly see which one is making it light up/beep. Just have to be careful when working on an open and hot panel, but that goes without saying!
This is great. Question. Is this the same way if I need to wire ceiling pot lights and ceiling fan to two separate switches? I want to be able to dim the pot lights with one switch and the other switch would just turn the ceiling fan power on/off
little bit confuse, earlier it should be two cables incoming(line) and outgoing(load) and later with two switch it should be 3 cables? but I see earlier 1 and later 2?
can these instructions be followed for installing an interior ceiling fan? in other words, we currently have one existing switch to an outlet. would like to leave that as is and add a second switch to new ceiling fan in the same room. thanks
Thanks for the video. I’m looking for adding additional 2 switches instead of one. Am I able to just add 3 black wires? Or do you have a video for 3 switches?
He ran power to the light 1st then down to the switch. That's why he used 14/3 so black is hot in and red hot out to light where as most people just used 14/2 and white as hot out. But code changed and have to have a neutral in switch box now as some switches like lighted switches I just installed require a neutral to work. I personally don't like or use this method. It was just used to save wire.
Yes I only use them if I absolutely have to like if it’s a box cut into a wall that I just cannot expand to a double gang or triple gang but for something like this where it’s easy to do I prefer just normal switches as people don’t really like the double switches and I think they look a little worse but they can be good for some situations
Was that a Federal Pacific breaker panel on the left? Those are dangerous panels especially the Stab-Lok. They fail to trip and burn the wire up. The failure is really high like 1 in 3 or 4 breakers will fail to trip. That would be a good video: panel replacement. I know you have the ability and know how to do it safely and professionally.
Trust me I know it's there and that it's a problem the thing is with replacing it is the cost of having to switch everything out to arc fault if it was moved over to the main panel
Yo bro in the whole world its righty tighty , you need to put the wires in the screw so whenbyou tighten the wire screw it dont push the wire out , thats to prevent a fire 🔥
I don’t have that probe but when I replaced my doorbell button for a smart doorbell I figured out that the doorbell circuit transformer was in the garage so when I switch that circuit off the light for the button is off
Ohhhh that explains everything….you are Canadian that is why you are so young and know how to handle electricity….American kids don’t know $hit….and they don’t care to know $hit….
Double switches are great for a situation where you can't add another box but that's about it they suck in every other way specifically in this case not being able to install a smart switch for outside lighting
I did not see a smart switch being mentioned in the video. They looked liked the old dumb switches to me. Why is the color of the switch plate and switches different? Different brands.
This kid has been in the electrical business for 45 years.
😂
Excellent video Nick. That tool for finding the correct breaker is cool.
thnks for this no crap, talk business video....m installing another light in one of my rooms with a separate switch and this is exactly what i m looking for.....much appreciate it man hi5!! ...btw m in Canada as well...
Amazing instructions! Saved my day with my kitchen work!
love the tutorial!
very clear and to the point,
shows a lot of tips and details!
thanks
Pre-twisting is great but damn, that’s more than a pre-twist you did right there, that was the entire twist.
Best video from all what I saw , followed exactly the steps worked out perfectly
Faster to plug a desk light in and flip breakers till it's off 😂🤣
Wtf?! That current finder you have at the beginning, I’ve never even heard that something like that existed.. that doohickey is gonna make my life sooooooo much easier. Best part is it’s only 7am and I’ve already gotten all my learning in for the day, today is an amazing day :)
Great work!
Wow u did a great job, u r very educated for ur age. Keep up the good work and thank u for teaching me.
If you cut on both sides maybe an inch from the end, you can grab the ends of the sheathing and peel it open. No need to risk nicking the wire
Hi Nic, I have a light switch outside a closet that turns the light on/off inside the closet. The power source comes from the light fixture inside the closet to the switch outside the closet. The white wire at the switch is the hot.
I want to add an independent light with switch outside the closet using the power from the closet light switch and not the light box. Can you do that in Canada?
Hello great video!! Stay safe and have fun!! ...
Those circuit breaker finders are great but yeah they can be kind of vague and a pain. I usually take the front of the panel off so I can bring the tester up close to the hot leads coming off each breaker and more clearly see which one is making it light up/beep. Just have to be careful when working on an open and hot panel, but that goes without saying!
I usually turn off the entire main system just to be safe. LOL!
What if I don’t have the red wire on my existing switch? Is it still possible?
Just a question.. is this up to code in usa? Illinois to be exact
This is great. Question. Is this the same way if I need to wire ceiling pot lights and ceiling fan to two separate switches? I want to be able to dim the pot lights with one switch and the other switch would just turn the ceiling fan power on/off
Yea same idea
little bit confuse, earlier it should be two cables incoming(line) and outgoing(load) and later with two switch it should be 3 cables? but I see earlier 1 and later 2?
The shed videos should have a playlist called the sheds lol
The idea is to do it when you have the drywall in place….but I truly believe this young guy knows how to handle it….
can these instructions be followed for installing an interior ceiling fan? in other words, we currently have one existing switch to an outlet. would like to leave that as is and add a second switch to new ceiling fan in the same room. thanks
Same concept yes
Thanks for the video. I’m looking for adding additional 2 switches instead of one. Am I able to just add 3 black wires? Or do you have a video for 3 switches?
Yes it would be the same thing just three wires on the line side of the switch
Could I do this to add a stitch for a ceiling fan in a living room?. Thanks.
Yeah it’s the same concept light or fan I’m assuming it’s a finished space though so you would have to fish wire through the ceiling and the wall
A bit confused as if these 2 switches are powering 2 lights but shouldn't there be 3 cables? 1 power and 2 out to the lights
He ran power to the light 1st then down to the switch. That's why he used 14/3 so black is hot in and red hot out to light where as most people just used 14/2 and white as hot out. But code changed and have to have a neutral in switch box now as some switches like lighted switches I just installed require a neutral to work. I personally don't like or use this method. It was just used to save wire.
Have you heard of combination switch? Basically it is a switch that can control two lights and will fit in one electrical box. Saves you some trouble.
Yes I only use them if I absolutely have to like if it’s a box cut into a wall that I just cannot expand to a double gang or triple gang but for something like this where it’s easy to do I prefer just normal switches as people don’t really like the double switches and I think they look a little worse but they can be good for some situations
Was that a Federal Pacific breaker panel on the left? Those are dangerous panels especially the Stab-Lok. They fail to trip and burn the wire up. The failure is really high like 1 in 3 or 4 breakers will fail to trip. That would be a good video: panel replacement. I know you have the ability and know how to do it safely and professionally.
Trust me I know it's there and that it's a problem the thing is with replacing it is the cost of having to switch everything out to arc fault if it was moved over to the main panel
💯👍I did it !!!! Thanks bro
11:32 Idk why my house has full of backstabbing connections. Keep up the great work 👍!
Because it’s easy to do and faster=more money
If you hit the test button on the circuit finder plug wouldn’t it trip the gfci or breaker? I’m just curious if it would or not.
It will test a GFCI so it would trip a GFCI receptacle but it won’t trip a normal breaker only if it’s a GFCI breaker
Thank you, though. I learned what I need...
Surely your circuit breakers are marked? And you can find them by the ampage rating?
No
Thanks a lot!
It was very helpful!
Don't ever take anyone's word except your own when someone tells you.. "The power is off bro.. trust me."
Yo bro in the whole world its righty tighty , you need to put the wires in the screw so whenbyou tighten the wire screw it dont push the wire out , thats to prevent a fire 🔥
Yes the wire loop should be in the same direction that the screw tightens up
Cool
good
Rip for those that are required to have EMT and Metal Box
I don’t have that probe but when I replaced my doorbell button for a smart doorbell I figured out that the doorbell circuit transformer was in the garage so when I switch that circuit off the light for the button is off
You know what always works very quickly? Turning off the entire main system with one simple click. 🤣
@@Asiansxsymbol but that shuts off the heater for water and AC
@@VOLTRONDEFENDER4440 unless you have a gas water heater
@@DanTDMJace no my parents house has a tankless water heater
One switch works other doesn’t. I have spend all day today to figure this out. No luck yet.
I have found that some of those testers you have to turn them a different angle
Yeah they can be strange to get them to work
You should add some more stuff to the look out
I actually have a video coming out soon that will be about adding something to the tower
Thanks
Usually I destroy dollar store quality items hehe
From what I see from your comment you would like to destroy everything
why does mine have two 2 wires (no red)
Ohhhh that explains everything….you are Canadian that is why you are so young and know how to handle electricity….American kids don’t know $hit….and they don’t care to know $hit….
How old are you my guy?
15
@@nics-systems-electric younger than I thought lol
@@DanTDMJace 16 now lol
Why not just use a double switch instead of the box? A lot cheaper and simpler.
Double switches are great for a situation where you can't add another box but that's about it they suck in every other way specifically in this case not being able to install a smart switch for outside lighting
I did not see a smart switch being mentioned in the video. They looked liked the old dumb switches to me. Why is the color of the switch plate and switches different? Different brands.
@@TexasEngineer because it's ivory switches and white switch plate
@@nics-systems-electric Is that intentional? I have never seen that mixed. Not all ivory matches and it is getting impossible to match the old work.
I have 2 red wires what do I do
Thanks kid you just my job a lil easier
which one is hot ?
Black or red