Хорошее видео. Понравилось то что в видео есть всё. Продемонстрирована сборка. Продемонстрировано испытание. Также ты проверил до какой глубины хватает давления. Даже добавить нечего. Нравится !
I see a lot of half-arsed DIY videos, but this one actually shows some knowledge. It's the little things, like roughing up a surface before gluing, or properly measuring the stroke, and even testing the results properly, that make for some quite impressive videos.
UA-cam suggested this for me so I watched it and gave this project a try. I made some of my own modifications and I think I could actually use this to make a crude airbrush setup. Instead of using silicone for the membrane pieces, I used pieces of a normal party balloon. I also cut a hole in the top of my chamber and siliconed another balloon in the hole so I would have a bit of a reservoir. Overall I'd say this thing is pretty decent for low volume low pressure stuff.
Really nice project. I've done something like that about 12 yrs ago and that worked too. I got improvement for You: Removing blades in fan rpm are increase and probably current consumption should go a little bit down.
Я сделал за 1 минуту!!! Кулер от обдува процессора с ноута. О.5 л бутылка ПЭТ. Натянул на прямоугольный выход. Зажигалкой нагрел бутылку и буквально запаял бутылку в кулер. Подал от зарядки мобилы 5 вольт и поставил переменный резистор для регулировки скорости кулера. Всё. Подача воздуха для новой самоделки термофена готова.
Halo saya dari indonesia saya ingin mengucapkan terima kasih banyak karna ide anda sudah membantu saya dalam membuat solder uap menjadi berhasil dan oksigen buatan untuk aquarium saya nanti.👍🎉
Cool man. You might wanna use it to make copper acetate to do copper e-plating. Drop something like copper sheet...etc. inside white vinegar in a jar and let that bubble on it until it turns blue.
Do you know what's the output in liters/minute and how noisy it is comparing to genuine aquarium air pump (provide the brand and model name you've used for comparison)? I want to swap my noisy air pump as silencer box I've made doesn't help enough (want to eliminate noise as much as possible).
Nice and neat, but the performance could be improved. Your cylinder is too large, relatively to the travel or stroke. The large volume of air inside compresses and that's why you get only 10cm of 'depth'. Try stuffing the chambers with something solid like balls to take up as much volume as possible leaving paths for the air and try
It is important not the number of revolutions, but the torque of the motor. To force the water column, it is important to have a number of amps in the cooler. It takes a lot of effort to overcome the resistance of the membrane. The greater the depth of immersion of the tube in the water, the more forces must be applied to the membrane. Better 1 amp and 1000 rpm than 0.5 amperes and 2000 revs. Do you understand me?
Автор, а если дополнительно сделать камеру для вентилятора с выходом на впускной клапан? Конечно производительность +- такая же, а вот сила насоса увеличится. Как идея?
Не совсем понял) Если производительность будет такая же, то не имеет смысла. Крутящий момент кулера слишком мал. Из всех написанных комментариев я понял, что нужно сделать маленькую рабочую камеру и поставить другой мотор.
Dear friend, Pierre! It was very pleasant to read your message. Thanks for the feedback! If you have any ideas, I will be happy if you share them. Maybe there's something I can do. Or watch my channel. Along with the usual video there will be many more interesting ideas. Have a nice week! :) Alex
To increase pressure fill the space somehow behind the membrane. Now you have a very small displacement with a very big cylinder. In best case the two volumes almost the same. Then only the motor will be the limit. :-)
Я всё видео думал, что куллер будет как-то работать по прямому назначнию. Куда-то воздух нагнетать лопостями. А оказалось, он используется просто в качестве моторчика.
hey bro hi i am new at this work and i dont know from where do i buy this thing like some battery connector or fans like this can you say me from where did you buy that things and i love to do like this work thanks your video was awesome sorry for bad English its my third language lool
The simplest and most effective to buy a new device. If you want to do yourself, then you need to consider some of my mistakes. I did everything from scrap materials. Buying only the connectors and silicone used to make membrane. All links you can see in the description. Motor is better to take more powerful, even if it will be less rpm, but the torque should be higher, so he could easily move the membrane. A conventional computer fan is very high speed, but little torque, so it is sometimes not enough effort to overcome the resistance of the membrane. I hope you understand me. The working chamber should be as small as possible. Ideally, the amount of incoming air must be equal to the amount of escaping air. If it is a good motor, it is possible to increase the stroke of the piston. This will allow for 1 cycle to pump more air. These are the basic guidelines. Good luck!
а скорость вращения кулера влияет на производительность? и будет ли лучше с оборванной крыльчаткой? или использовать воздушый поток от кулера каким либо образом?
В данном случае скорее нет, чем да. При увеличении расстояния между рабочей камерой и кулером, производительность насоса падает в ноль, а кулер начинает бешено вращаться. При сближении ход мембраны увеличивается и он начинает работать отлично, но возрастает нагрузка на кулер и так как он не рассчитан на большой крутящий момент, может остановиться. Думаю без лопастей будет лучше. Кто-то предлагал использовать воздушный поток для охлаждения аквариумной лампы) или что-то наподобие)) Всё же я рекомендую использовать другой мотор, который выдаёт бОльший крутящий момент. Именно момент тут намного важнее, чем обороты.
I bought it at a local store in Russia. "Super moment, maxi volume, universal second glue". I want to try to order this one on AliExpress, it is very similar: ali.pub/1genfn
I wouldn't call it a compressor because it doesn't do much compression with that low torque motor if the air were to be contained in a air tank or smth.
Friends! What do you want to see in the following videos? What are your problems?
:-)
rai3r jegjebs
Хорошее видео.
Понравилось то что в видео есть всё.
Продемонстрирована сборка.
Продемонстрировано испытание.
Также ты проверил до какой глубины хватает давления.
Даже добавить нечего.
Нравится !
Can we use another thing aside from silcone cover because i dont have one
Как называется музыка в начале ?
Шазам её не нашёл.
I see a lot of half-arsed DIY videos, but this one actually shows some knowledge. It's the little things, like roughing up a surface before gluing, or properly measuring the stroke, and even testing the results properly, that make for some quite impressive videos.
Thank you! I try to pay attention to small details, because I consider them important enough.
UA-cam suggested this for me so I watched it and gave this project a try. I made some of my own modifications and I think I could actually use this to make a crude airbrush setup. Instead of using silicone for the membrane pieces, I used pieces of a normal party balloon. I also cut a hole in the top of my chamber and siliconed another balloon in the hole so I would have a bit of a reservoir. Overall I'd say this thing is pretty decent for low volume low pressure stuff.
I love how cheap and random the starting materials are, the inventive ingeniousness and the accurate execution! Very nice.
Thank you very much for your feedback! Glad you liked it!
Really nice project. I've done something like that about 12 yrs ago and that worked too.
I got improvement for You: Removing blades in fan rpm are increase and probably current consumption should go a little bit down.
Thanks for the valuable recommendation! You are absolutely right. Glad to see my video :) Good luck!
Also running the syringe through the cap so you can glue down the two tabs on the inside for more durability
Я сделал за 1 минуту!!! Кулер от обдува процессора с ноута. О.5 л бутылка ПЭТ. Натянул на прямоугольный выход. Зажигалкой нагрел бутылку и буквально запаял бутылку в кулер. Подал от зарядки мобилы 5 вольт и поставил переменный резистор для регулировки скорости кулера. Всё. Подача воздуха для новой самоделки термофена готова.
Halo saya dari indonesia saya ingin mengucapkan terima kasih banyak karna ide anda sudah membantu saya dalam membuat solder uap menjadi berhasil dan oksigen buatan untuk aquarium saya nanti.👍🎉
The first EVER DIY video without using that goddamn hot glue. You sir have my sincere appreciation.
OMG Brushless motor air pump, much better than the Chinese brushed pumps that last 1-6 months
Jesus. All I can say is (being quite honest) I am MORE than impressed by how clean the cap looked. Not understanding why noone wheres gloves
звук приятный при работе этого компрессора. через 30 минут соседи сойдут с ума
Cool man. You might wanna use it to make copper acetate to do copper e-plating.
Drop something like copper sheet...etc. inside white vinegar in a jar and let that bubble on it until it turns blue.
Simply astonish...
Going to use it on my car to vent the crankcase.
absolutely astonish
Cheers from Bra
مليملقمب
Subscribed, coz you showed that the maximum depth is 10cm. others usually doesn't show thier drawbacks.
Bro, imagine turning my 4 fans aquarium into a air pump make me so happy, 1 stone 2 birds
Ang galing naman...hahahaha ang bangis!
You have a brilliant mind sir!
Still better than Jake Paul
Remove the fan blades
The rotation speed increases
Thanks mate! :)
SaiF SwOrD rrr TV viouhgggtttyyyllllllllllllp log IT IT hui y7 Huy Bhi ihn un SZ es ar
like what you said
Fan blade can provide some air to prevent the motor from over heating
very hardworking man
That's for sure
Bro, what about noise from these,,I also trying to make pump with cooling fan moto to decrease the unwanted noises
lowering the bottle's volume will increase air flow and pressure. just cut 3-5 cm off and glue it back
Good advice, thanks!
I thought the same thing. My idea was to place a solid into the bottle. Almost fill it completely.
I can't beleive I sat through this video. At least I'm in the bathroom. Not a total waste of time.
Thank you! With a light steam!
Cool idea; however, wondering how long it will run before breaking
it depends of the glue you yuse,he used gorila glue,i think...
@@mr.cantillasz1912 And if you can make it good enough without any "incidents"
It's everlasting thing... It's work, work and work, untill the Universe doesn't collapse. Just magic... 😉
if you get rid of the fan blades you could save some battery power, pushing all that extra air resistance for no reason will draw more current.
thanks
I take pump system from old water gun. I used 12W DC PC fan but I isn't strong enough to make the movement... Any help
Use a motor with high torque
Brilliant.. Very cool little project. I bet with a full shop, including a cnc and 3d printer, you could come up with some pretty amazing stuff!
Thanks for the feedback! Hopefully soon I will have a 3D printer.
Skillful and clean hands too! Nice to watch!
Do you know what's the output in liters/minute and how noisy it is comparing to genuine aquarium air pump (provide the brand and model name you've used for comparison)? I want to swap my noisy air pump as silencer box I've made doesn't help enough (want to eliminate noise as much as possible).
I am so glad it worked ,for your time and work paid off well
Can we make a water pump on this same principle? If yes, then make it. Please!🙏
@Dial please make it... (water pump based on this principle). Please!
Cha gaye guru😙
can i build this using only rocks and sticks? i have nothing more.
May be)
This could be a great air filter for peoples who smoke in the room like i do
Nice and neat, but the performance could be improved. Your cylinder is too large, relatively to the travel or stroke. The large volume of air inside compresses and that's why you get only 10cm of 'depth'. Try stuffing the chambers with something solid like balls to take up as much volume as possible leaving paths for the air and try
You should cut the fan blades or make space for airflow otherwise it will cause unnecessary air drag and force on fan motor.
Maybe i will try this out. But im gonna use a small motor from amazon with 15000 RPM. Will that increase the airflow?
It is important not the number of revolutions, but the torque of the motor. To force the water column, it is important to have a number of amps in the cooler. It takes a lot of effort to overcome the resistance of the membrane. The greater the depth of immersion of the tube in the water, the more forces must be applied to the membrane. Better 1 amp and 1000 rpm than 0.5 amperes and 2000 revs. Do you understand me?
Dial yes i understand you.
buy the air pump from amazon, that would be a lot more efficiency
Excellent work
Beautiful and intricate fabrication. Where did you get the membrane material ? keep posting nice DIYs. Kudos.
Thanks! This membrane is made by me. Link to the video is in the description.
Please be sure to closer the camera for clear experiment and show complete parts list and please mantion all conections clearly thanks Sarfraz.Khi pk
Clean work indeed but you could just make a duct that channels into a pipe?
So nice and so cute
See if you can redirect the flow of the fan to blow on the pump to cool it down
Забыл зашкурить и обезжирить банку перед приклеиванием к площадке))
Very nice! i NOW THINK MAKE VERY BIG one and use wind or river to turn the pump over! Thanks for the video!
I'm glad that you liked it and you were inspired by the idea for your project. Write about the results of your experiments. Good luck!
Автор, а если дополнительно сделать камеру для вентилятора с выходом на впускной клапан? Конечно производительность +- такая же, а вот сила насоса увеличится. Как идея?
Не совсем понял) Если производительность будет такая же, то не имеет смысла. Крутящий момент кулера слишком мал. Из всех написанных комментариев я понял, что нужно сделать маленькую рабочую камеру и поставить другой мотор.
I do not understand, it works on what physical principle? Why bubble in a water bottle cool it ?
Can I use it as vacuum pump for vacuum tube ?????
Dear Dial person, Well, that was great! very clear visual instructions. Do please make more videos. Happy days, pierre from New Mexico
Dear friend, Pierre! It was very pleasant to read your message. Thanks for the feedback! If you have any ideas, I will be happy if you share them. Maybe there's something I can do. Or watch my channel. Along with the usual video there will be many more interesting ideas. Have a nice week! :) Alex
Is that an air pump or a compressed air generator?
How long have you had it running now? Was wondering about bearing life expectancy??
I do not know how much work, then I'll put another motor.
Can you make water turbine like water circulation instead of air cooler?? No electricity use
You are a perfectionist. Great work thank you
To increase pressure fill the space somehow behind the membrane. Now you have a very small displacement with a very big cylinder. In best case the two volumes almost the same. Then only the motor will be the limit. :-)
Very smart project
If you remove the blades of the fan you will get a little more force from the motor :)
Yes sir! On another can not be)
nicely done, just wondering what is the run time before mechanical failure for something that small?
Thank you. I don't know) it is better to use another engine.
delicate and clever.
Very very good
maybe you could cut the wings off the cooler so it converts the power more effizient into turning momentum
Definitely!
is this air blower or water pump??
Nice air pump
Thank you
thanks bro....verry usefull
Thank you! make the chamber smaller and use a more powerful motor
buen producto!! pero de donde saco la ,membrana ?
For what ill use that?? Maybe car tire??
Я всё видео думал, что куллер будет как-то работать по прямому назначнию. Куда-то воздух нагнетать лопостями. А оказалось, он используется просто в качестве моторчика.
Hello, how many bars does the air produce?
I used this video to fall asleep. dear god was it boring.
Why not sticking the fan into to bottle and finish is the pump
do you remember that i was your first subscriber? :D?
Of course! I started to think "Where are you and where are your comments?" :) How do you do?
wow
Dial
its only a pump, not compessor because if there is pressure inside the valves wont open
If I were you, I won't take any care about the plastic corner. XD
hey bro hi i am new at this work and i dont know from where do i buy this thing like some battery connector or fans like this can you say me from where did you buy that things and i love to do like this work thanks your video was awesome sorry for bad English its my third language lool
The simplest and most effective to buy a new device. If you want to do yourself, then you need to consider some of my mistakes. I did everything from scrap materials. Buying only the connectors and silicone used to make membrane. All links you can see in the description. Motor is better to take more powerful, even if it will be less rpm, but the torque should be higher, so he could easily move the membrane. A conventional computer fan is very high speed, but little torque, so it is sometimes not enough effort to overcome the resistance of the membrane. I hope you understand me. The working chamber should be as small as possible. Ideally, the amount of incoming air must be equal to the amount of escaping air. If it is a good motor, it is possible to increase the stroke of the piston. This will allow for 1 cycle to pump more air. These are the basic guidelines. Good luck!
Awesome. Very neat and clean work.👍👍👍
I like your comment, thank you! :)
i bet it makes a lot of noise due to that bolt glued to the fan it makes the fan to be bad balanced because is not centered....
The best I ever seen
You should switch input and output valves so you get a vacuum pump
а скорость вращения кулера влияет на производительность? и будет ли лучше с оборванной крыльчаткой? или использовать воздушый поток от кулера каким либо образом?
В данном случае скорее нет, чем да. При увеличении расстояния между рабочей камерой и кулером, производительность насоса падает в ноль, а кулер начинает бешено вращаться. При сближении ход мембраны увеличивается и он начинает работать отлично, но возрастает нагрузка на кулер и так как он не рассчитан на большой крутящий момент, может остановиться. Думаю без лопастей будет лучше. Кто-то предлагал использовать воздушный поток для охлаждения аквариумной лампы) или что-то наподобие)) Всё же я рекомендую использовать другой мотор, который выдаёт бОльший крутящий момент. Именно момент тут намного важнее, чем обороты.
You can get better results by breaking all the blades from the fan.
DIY at its finest! Love it! (music reminds me from transport tycoon :))
you have a strong glue. can you tell me please what did you get this glue from? and its name? thanks
I bought it at a local store in Russia. "Super moment, maxi volume, universal second glue". I want to try to order this one on AliExpress, it is very similar: ali.pub/1genfn
Thank you so much
How to make water lift pump with CPU fan?
Thats great!
I am wondering how the fan spins when you taped it to the wooden plank? :/
Very good
seed need only water to germinate. but to grow it has to be sun hahaha
wonder if ventilator generates more wind
Finishing the ends of the board can be done inexpensively & very effectively with some drywall compound.
نفبنبه
He's making names up.
Cool, but put a powerful 12v engine there to increase power. I Liked.
Thanks for the advice!
I used rc helicopter motor with 5v 2.1a cell phone adapter and cables overheats and melts
use a delta computer fan if you would like more power.
Excellent !!!!!
Could've just used the fan which you already had but nope, cause we want to make everything lengthy and impractical 😂
I wouldn't call it a compressor because it doesn't do much compression with that low torque motor if the air were to be contained in a air tank or smth.
very nice
Thanks a lot
You went overkill lol
I Loved It.
I'm too drunk to understand why I need this.
To sober up :D
@Ninja.. My guess is you were probably drunk trying to figure out how you could make something that could supply suction in a pleasurable way.. 😂😂😂
Should take it easy on the drill bit let it do the work instead of forcing it
Nice video, easy to follow you is a person with pedagogical thanks thank to share
Never heard of this opinion of myself! Thank you!