Hey there! Great project! I'm trying to execute it for college, but mine is not working. I've used an old laptop charger as well, gauge copper wires and everything. I believe the problem is the magnets: I've used computer HD ones. What do you think? Apart from that everyhting is exactly like you did.
Muy bueno y puede ser muy útil para mover incluso otros motores para generar energía, solo faltaría saber cuanto consumen los solenoides de corriente. Me gustó
Great concept. But making the connecting rod-piston junction flexible enough is critically important. What is the highest RPM that you have been able to generate?
+Angshuman Pal, thank you. It would be between 150-250. But not yet tried to measure. However, its possible to increase the speed by increasing voltage and solenoid turns. It won't start automatically. Add one more cylinder. That's 3-cylinder solenoid engine will start automatically and it would have higher rpm.
thanks for the video! i am in the process of building a diy solenoid valve for agricultural purpose. would you be able to help me with specifications ?
Thank you for your kind words. Don't forget to subscribe to our channel.. Latest project is almost ready for upload. Get it directly in your youtube home. Watch and share! Thank you.
New Physicist, very creative with the syringes and the 2 pistons, a great experience of physics to present in the school. Could you put the crankshaft at 90 °? Congratulations, like
+Carlos Silva , thank you very much. I'm going to make more beautiful and useful projects. Please subscribe to new physicist to get them on your homepage.
hey i really liked the project but I've already started working on Van De Graaff generator and needed a few tips abt the belt and rollers so if you can kindly help me I'd be much obliged
roshan nigam shaw, Glad to know you are interested in solenoid engine. Connect starting ends of coils together and connect to negative lead of the battery. Connect remaining 2 ending leads to 2 make and break arrangement. Connect battery +ve to crank shaft. that's all. for more info click link provided in the description section. If you have doubt, don't hesitate to ask here. I'm always live to help. Thank you dear.
hey sir may I ask 2 questions? 1. a 1-meter magnetic wire is nearly enough to make 60 turns winding? 2. What is the girth or the diameter (mm) of the syringes did you used?
+Tiziana Hetherington, They are used to fix glass sheets on window panes. They are widely used in India. Its a hollow, easy to bend fiber material. I'm using this material for wide range of applications, especially when making new physicist projects. Pls visit a carpenter workshop or a hardware shop to find this or similar material. Or I suggest you to use your creative skill. Regards!
+Vidhi Gupta, I usually make projects with materials that are available to me. These are used to fix glass pieces on window panes. If it isn't available. Look around you. I'm sure you'll get..
i used your idea and i had made the model as you done but when i connected it to the battery it does not rotating i tried it rotating many times but it doesnt worked can you explain whats the problem please today is the last date of submission of the project
Thank you. You have some awesome DIY videos. I have subscribed to your channel. I hope you will subscribe to my channel. If you are ready we can work together to promote our videos by giving likes and share.
+V shiva kumar, that would be better. You can buy them from amazon. Make 3 solenoid cylinders if you want to make it self start. No flywheels required.☺
if i want to make magnets not to contact with cylinder walls what should i do, because i made it with neodymuim magnets but there is friction,can i do that
+ansary hameed , glad to know you are making a solenoid engine. That too using neodymium magnets. If you are using a syringe for cylinder, friction would be negligible. Don't bothered about it. Neodymium magnets are powerful enough to overcome this. Try some lubricant between two surfaces. There should not be a large lap between magnet and cylinder. Make 3 cylinder solenoid engine instead of two. It'll start automatically. Regards. Let me know once you are done.
We used a laptop adapter to run this engine.. That is 20v. 12 volt is enough to run this solenoid engine. Let me know once your solenoid engine project completed. Thank you
Very Interesting... I assembled the whole unit using square wood 1cm pieces instead of fibre reepers... however though I completed the whole project and connected the 18v power supply.. the unit is not working... what cud be the reason ????
+Kaiser de Emperana Beelzebub IV. A two coil solenoid engine won't work without flywheel. Add another coil (3 coil). It will start automatically. Glad to know you are interested in making solenoid engine. Best wishes. Let me know once you succeed.
+Kaiser de Emperana Beelzebub IV, that's it. I'm always live to help people like you. You can contact me anytime on UA-cam. Let me know once you complete your project. Thank you.
+Kaiser de Emperana Beelzebub IV , no problem. You can add any number of turns or overlaps. It will strengthen your engine Only use magnet wire 24-28 guage.
making projects, explaining them, helping people who need it.. all these things are my passion brother. This channel is what I am, and where I live, work and make living. I love people like you.kindly subscribe to my channel.
+ansary hameed, I used ferrite magnets. But I recommend you to use neodymium magnets if you are planning to make your own engine. They have more magnetic field strength. Buy from amazon. Thanks
+Kaiser de Emperana Beelzebub IV laminated copper wire. Copper wire insulated by thin layer of polyethene. Its widely used for winding motors, mixer motors etc.
Que bien parsero megusta mucho la electronica usted es un genio felisitasiones.
Woodglut comes with very useful plans with all the details you need.
That’s really nice
@@newphysicist Yeah ✌️
Hey there! Great project! I'm trying to execute it for college, but mine is not working. I've used an old laptop charger as well, gauge copper wires and everything. I believe the problem is the magnets: I've used computer HD ones. What do you think? Apart from that everyhting is exactly like you did.
Muy bueno y puede ser muy útil para mover incluso otros motores para generar energía, solo faltaría saber cuanto consumen los solenoides de corriente. Me gustó
Great concept. But making the connecting rod-piston junction flexible enough is critically important. What is the highest RPM that you have been able to generate?
+Angshuman Pal, thank you. It would be between 150-250. But not yet tried to measure. However, its possible to increase the speed by increasing voltage and solenoid turns.
It won't start automatically. Add one more cylinder. That's 3-cylinder solenoid engine will start automatically and it would have higher rpm.
Hi Bro supper video 👌👌👌👌👌
Thanks man!🌸🌸
what kind or battery did you used?
Sir Jo apne cylinder par copper wiring ki wo kitne mm ki h
Ya kitni mooti h
thanks for the video!
i am in the process of building a diy solenoid valve for agricultural purpose.
would you be able to help me with specifications ?
How do you conected the wires is there any detailed view of it or a diagram?
I actually forgot the Diagram friend. It’s been 4 years since I created it. Let me check once again and clarify.
fiber reeper ki jgah or kuch use kr skte h kya
magnets use krni jroori h kya
Does it matter if the top side of the piston magnets are north or south?
Thank you .Learning so easy !
Bravo e complimenti per la semplice realizzazione.
Excellent !!😎
Where can I find fibre reeper PLZZ help, I need it to make one of your heliostat solar power plant project
Enquire in a hardware shop. Usually it is used to fix glasses on windows. 👍
It is nice to see the things you can make with so litlle supply and tools. Nice video, it helped me build my own version.
Great work. Excellent results.
Thank you for your kind words. Don't forget to subscribe to our channel.. Latest project is almost ready for upload. Get it directly in your youtube home. Watch and share! Thank you.
hi! can i ask the measurement and distance between bends for the crankshaft? thanks.
New Physicist,
very creative with the syringes and the 2 pistons, a great experience of physics to present in the school. Could you put the crankshaft at 90 °? Congratulations, like
from this engine can we generate current ?
Congratulations from Colombia !!! beatiful project.
+Carlos Silva , thank you very much. I'm going to make more beautiful and useful projects. Please subscribe to new physicist to get them on your homepage.
really impressed. Can you give more detailed text based guide to make this solenoid engine?
Thank you laven for your kind words. Here is the link www.newphysicist.com/make-solenoid-engine/
Enjoy. Don't forget to subscribe to my channel.
Which gauze coiled copper wire
can we use wood instead of fiber sheet to make the cylinders
+Ahmed Raja, yes you can. Go ahead!
New Physicist I have made but it's not working can u plzz help
+Ahmed Raja, make sure
Strong magnets
Enough turns of copper wire 25-30 guage
Smooth crankshaft
Flexible piston head
Loose slip contacts
Correct magnet polarity arrangement
Correct battery polarity.
Watch video again for understanding connection.
Thanks for watching. Regards.
New Physicist if I bring the two piston which I made the magnet on there top should repel each other or it should attract each other
+Ahmed Raja, both north up or both South up.
Wind both solenoid similarly.
You got it right,?
hey i really liked the project but I've already started working on Van De Graaff generator and needed a few tips abt the belt and rollers so if you can kindly help me I'd be much obliged
thank you.
very good.
hello from México.
+Angel Fernando Jiménez Cano, thank you so much..
Will 9 volts be enough?
How many turns should i make on serynhe
does solinoid current is joining in series?
+Sanil Soraisham, no dear. The make and break arrangement will pass current through one solenoid at a time. Alternatively.
What is your magnet pole in first and second cylinder
nice one and please can you shaw me the wiring I am about to complete this project
roshan nigam shaw, Glad to know you are interested in solenoid engine.
Connect starting ends of coils together and connect to negative lead of the battery.
Connect remaining 2 ending leads to 2 make and break arrangement.
Connect battery +ve to crank shaft.
that's all. for more info click link provided in the description section.
If you have doubt, don't hesitate to ask here. I'm always live to help. Thank you dear.
what is the cross section of copper wire used for solenoids
+V shiva kumar , ??_24 gauge
What is the power input u given and what is the outpout rpm of that wheel plz tell it sir
Sharing is caring..
shared
Good tutorial.. Shared
Good job
Music is so lovely and project too
hey sir may I ask 2 questions?
1. a 1-meter magnetic wire is nearly enough to make 60 turns winding?
2. What is the girth or the diameter (mm) of the syringes did you used?
1 meter is not enough I think.
Dia of syringe is 12mm
Thankk youu sirr anotherr question 🙋♂️, it can run with 3volts to 6volts or maybe 8volts?
I conducted a science investigatory project and I’ll make a solenoid engine powered by thermoelectric generator (TEG) type
Yeah definitely
Let me know once you are done. I appreciate your move
for three solenoids the -ve should connected to the starting ends of three solenoids?
+V shiva kumar, +ve or -ve to all starting ends
is it possible to make slim and small
where do u get fibre reepers and ACP sheets
Great idea.. Thank you for sharing
Kindly subscribe to newphysicist for more DIY tutorials
Hello Sir, what is a :Fibre Reeper Piece"? Forgive me i m italian and i have no idea what it is. Thanks. You project is wonderful.
+Tiziana Hetherington, They are used to fix glass sheets on window panes. They are widely used in India. Its a hollow, easy to bend fiber material. I'm using this material for wide range of applications, especially when making new physicist projects.
Pls visit a carpenter workshop or a hardware shop to find this or similar material.
Or I suggest you to use your creative skill. Regards!
Hihihi thank you very much, now that i know what they are, i will try to find something similar.. Ciao and thank you for sharing you videos.
You are always welcome. Keep in touch with my channel, New Physicist. Share best videos.
Pls suggest
+Vidhi Gupta, I usually make projects with materials that are available to me. These are used to fix glass pieces on window panes.
If it isn't available. Look around you. I'm sure you'll get..
i used your idea and i had made the model as you done but when i connected it to the battery it does not rotating i tried it rotating many times but it doesnt worked can you explain whats the problem please today is the last date of submission of the project
+uday kumar, change polarity of magnets.
Make sure, slip contact is flexible enough for free rotation of crankshaft.
kkk sure tanq
Muito bom, gostei, meus parabéns.
which pole of the magnet should be glued at the fibre reeper
+V shiva kumar, both piston same pole. Interchange the input, to know which works better.
+V shiva kumar , visit the link provided in the comment section..
What happens if I reverse the procedure? If I turn that circle, will it create a voltage?
Nice video. Good setup with different idea. Keep it up.
Thank you. You have some awesome DIY videos. I have subscribed to your channel. I hope you will subscribe to my channel. If you are ready we can work together to promote our videos by giving likes and share.
Done. agreed to work together
Science & Technology 1
should I use neodymium magnets?
+V shiva kumar, that would be better. You can buy them from amazon.
Make 3 solenoid cylinders if you want to make it self start. No flywheels required.☺
if i want to make magnets not to contact with cylinder walls what should i do, because i made it with neodymuim magnets but there is friction,can i do that
+ansary hameed , glad to know you are making a solenoid engine. That too using neodymium magnets. If you are using a syringe for cylinder, friction would be negligible. Don't bothered about it. Neodymium magnets are powerful enough to overcome this.
Try some lubricant between two surfaces. There should not be a large lap between magnet and cylinder.
Make 3 cylinder solenoid engine instead of two. It'll start automatically.
Regards. Let me know once you are done.
What is the minimum voltage required to run this solenoid engine? Piston design super..
We used a laptop adapter to run this engine.. That is 20v. 12 volt is enough to run this solenoid engine. Let me know once your solenoid engine project completed. Thank you
Where can I get these fiber reepers?
how much lenth wire is needed for one cylinder
what is that upper slip meant for how to do that
+Md.ZulfaqarAhmed Alimi, there are two slip contacts, for two solenoids. It connects and disconnects any one polarity from the battery.
i like your teaching
One of the best, thanks for sharing...
Thank you very much. Subscribe to us for more videos like this.
This is actually cool
Thank you. Don't forget to subscribe to new physicist. Any suggestions to improve my video structure?
is there any sort of replacement of ACP :)
In brake arrangement what type of gauge wire can I use
10_14
working on the floor ?
Wht is the need of Dc ...is it compulsary
Why dont u put just a screw instead of putting the magnet
how much should be the power of dc source to run 8 solenoids?? please reply...
+Bibek Dhungana, 12 volt is enough, if you use more turns and high guage magnet wire. (Thin). Regards.
did you use a transistor as a amplifier< if so then can you tell me the number of transistor?
Which mm coil we need ?????
Very, Very Good !!!
+Rosano RIBEIRO LEITE, than you!🙌
and it's working perfectly
and one more question what is fibre reeper
+V shiva kumar, we used it to fix window glasses to the frames. Do you have another name for it?
😀
Very Interesting... I assembled the whole unit using square wood 1cm pieces instead of fibre reepers... however though I completed the whole project and connected the 18v power supply.. the unit is not working... what cud be the reason ????
+NAJMUDDEEN HARNESWALA, Glad to know you made it. Check magnet poles. Regards
what is a fibre reeper?
Sir what we use instead of fiber reeper
I live in small town no one have fiber reeper in his shop please help
Rs 2 chineses pen🤗
wow . whary nise engine video u are great.
Gr8 project.
One request name of background music please...!
"Eine Kleine Nachtmusik" is the name of the background music.
my project is done only not working. I think its because of the coils on above. can you explain or give some tips
+Kaiser de Emperana Beelzebub IV. A two coil solenoid engine won't work without flywheel.
Add another coil (3 coil). It will start automatically.
Glad to know you are interested in making solenoid engine. Best wishes.
Let me know once you succeed.
how much minimum copper wire (length) did is required
ok got it from the below site you gave in comments
+Kaiser de Emperana Beelzebub IV, that's it. I'm always live to help people like you. You can contact me anytime on UA-cam. Let me know once you complete your project. Thank you.
thanks for your help
+Kaiser de Emperana Beelzebub IV, you are always welcome. Subscribe to my channel, like my diy project videos, and share.
would it short circuit if I overlap in the coil
+Kaiser de Empeana Beelzebub IV , never. Use insulated coper wire. It's called Magnet wire!
It won't short circuit when overlap.
+New Physicist wouldn't the size if coil increase drastically
+Kaiser de Emperana Beelzebub IV , no problem. You can add any number of turns or overlaps. It will strengthen your engine
Only use magnet wire 24-28 guage.
if a solenoid is inserted inside another one. is the inserted solenoid in the core of the outside one???????
sir copper wire kitne mm ya gej ka hai
+ganesh prajapati 24-30
+ganesh prajapati gauge 24-30
can somone tell me where can I find long Fibre Reeper Pieces.
well nice vedio.
you can get it from carpenter's workshop. or hardware shop.
Very fast response. good channel.
And it is admirable that you responded to everyone
making projects, explaining them, helping people who need it.. all these things are my passion brother.
This channel is what I am, and where I live, work and make living.
I love people like you.kindly subscribe to my channel.
what type of magnets are those
+ansary hameed, I used ferrite magnets. But I recommend you to use neodymium magnets if you are planning to make your own engine. They have more magnetic field strength. Buy from amazon. Thanks
Probably the best and simple solenoid engine making video 👍👍Keep it up😊, Subscribed already!
can you tell me what is magnet wire
+Kaiser de Emperana Beelzebub IV laminated copper wire. Copper wire insulated by thin layer of polyethene. Its widely used for winding motors, mixer motors etc.
do you live in raipur chhatisgarh india
+Kaiser de Emperana Beelzebub IV, I'm from Kerala dear.
good work man
Celver Fox , Thank you for subscribing.
from where r u
+nityanand roul, Hi, I'm from India
Thank you very much for your very nice project
sir I could not understand the connection of wires ....could u pls explain tat
pls about a crang shaft
the cross section of Copper wire is 26 gauge or 24
+V shiva kumar , both will work brother. Let me know once you complete. Thanks
very nice , i don´t see the voltage of the font power . is AC or DC? thanks
Sandro Rincon, output of s laptop adapter is DC 20 v
Thanks for the answer.
+Sandro Rincon , You are always welcome
Ya you are right
I have subscribed you 😊 plz upload more projects
+V shiva kumar , thank you dear. I'll. Check out my latest videos.
ok I will try now to make the solenoid more accurately
+V shiva kumar , regards
thanks .nice video
can I use 9 V two batteries
+V shiva kumar, use 2 nine volt batteries
Fantastic bro
how to Connect rods to Crankshaft eas
how many turns for the coil??
It says minimum 60 turns in the video.
very nice job!!
if you are planning to make another one...try neodimium magnets😉
nice channel, way to go.
Thank you Frank. Nice to meet you. I'm showing my passion through this channel. I love to make.. Can I know more about your passion?
How to make a flywheel
gauge of copper used for making solenoid
+Atish Shah, 22-28