god damn bruh I thought I was proud of my 00 XN Raiser I was legit deepening panel lines for 4 hours straight yesterday and I believed I did good and then I look at this beast
impressive how you got the LED's in the legs and arm's, always amazing to see the tight imo impossible spots you manage to cram some led's. also yea having it in full XN raiser on a action base is gone require some glue, i chose to take 4 of the base plates used in the AB4 and 5's and glue'd them together to form 1 big plate, then i set up the arm to hold up the XN raiser as i wanted it and glue'd all the joints up till the piece that takes the kit's adapter (which i also put some glue around to re-enforce it a bit, as my Unicorn full armor managed to split that piece. then i just glue'd the action base adapter between his legs leaving the peg unglue'd as that as long as action base arm piece doesn't split is actually quite secure (did apply multiple coats of paint on the adapter to make it thicker/jam in there more securely). i kinda like the old action bases more as they require verry little glue to be solid as a house, and also tend to do better with heavier kits. AB 4 and 5 have amazing adjustment range but with heavy kits they can be so flimsy and a slight move on the kit can shift it's balance from back heavy to front heavy and make it take flight (as my unicorn full armor did, think the shift in weight is what actually ended up splitting the connector between the kit and the AB, thankfully the AB comes with 2 of those pieces and i drowned the 2nd piece is glue to help it out, the unicorn made 1 flight amazingly not breaking anything, do not want it to make 2 flights :P)
Just found your channel this week and have been bingeing hard, haha. Thanks for all the great content! I’ve already learned a lot especially about incorporating LEDs into builds. If you ever feel like tackling a slightly different format for a video, I’d love to see your process for a non-speed build. Your models already look great so it would be cool to see what you do differently when you’re focused on every detail especially if you use any other techniques we haven’t seen in your videos yet.
I am currently working on MG Seven Sword/G and I managed to put an LED into wrist without losing any articulation. It was a huge PITA to set up though...
Yeah dude, that Tamiya scriber will betray you in a heartbeat. 😆 Also, have you seen the X-Base wireless LED setup? Could possibly be an option for doing the wrist.
i have to agree with you-the design of the kit is not optimal for standing and posing. I made a custom painted 7-seven version myself. While the shape and overall design is amazing, the weight distribution is so off...i love your custom LED btw. and want to know more on the paint that you use. are they better than Mr. hobby or tamiya?
I know I said this before, but I'd _really_ love to see Bandai make an RG GN-0000+GNR-010/XN 00 XN Raiser. The amount of LEDs required with most of these in itslef a mini fortune if you want to have LED for all of the area.
@xxnike629xx I know I said this before, but even if Bandai actually announces a RG 00 XN Raiser, sure you'll gonna hoard multiple *BOXES* of it... (which results in another financial problem, and you've no right to blame anyone but yourself...) But it's a sure thing too that you'll never build the kits inside those *BOXES* You know why? Because you're a *COWARD!* 💩💩💩💩💩💩💩💩💩💩
@xxnike629xx I wonder what *LIES* and *FAKE NEWS* against me you'll gonna pull from your ass this time. And to whom you'll gonna give your false BS next? 😮
They actually last pretty long if you got some top coat on. The only one that I would say would get scratched off is enamel paints. Enamel is the weakest, lacquer is the strongest
@@hyperion2109 enamel is the weakest?! I was under the impression acrylic was the weakest because not only is it safe to spray indoors, but it's also dirt cheap and water dissolvable! my life is a lie
my new favorite. simply awesome. not overdone better than the MGEX. thank you for sharing.
god damn bruh I thought I was proud of my 00 XN Raiser I was legit deepening panel lines for 4 hours straight yesterday and I believed I did good and then I look at this beast
Bendai. Jk.
Excellent work
Woke up to this. Guess breakfast's gonna have to wait :D
@Ignacio Jasper reported
@Dayton Shiloh bots
So much gunpla content in only a week 🙏🏾 Otaku you the MVP!
impressive how you got the LED's in the legs and arm's, always amazing to see the tight imo impossible spots you manage to cram some led's.
also yea having it in full XN raiser on a action base is gone require some glue, i chose to take 4 of the base plates used in the AB4 and 5's and glue'd them together to form 1 big plate, then i set up the arm to hold up the XN raiser as i wanted it and glue'd all the joints up till the piece that takes the kit's adapter (which i also put some glue around to re-enforce it a bit, as my Unicorn full armor managed to split that piece. then i just glue'd the action base adapter between his legs leaving the peg unglue'd as that as long as action base arm piece doesn't split is actually quite secure (did apply multiple coats of paint on the adapter to make it thicker/jam in there more securely).
i kinda like the old action bases more as they require verry little glue to be solid as a house, and also tend to do better with heavier kits.
AB 4 and 5 have amazing adjustment range but with heavy kits they can be so flimsy and a slight move on the kit can shift it's balance from back heavy to front heavy and make it take flight (as my unicorn full armor did, think the shift in weight is what actually ended up splitting the connector between the kit and the AB, thankfully the AB comes with 2 of those pieces and i drowned the 2nd piece is glue to help it out, the unicorn made 1 flight amazingly not breaking anything, do not want it to make 2 flights :P)
Just found your channel this week and have been bingeing hard, haha. Thanks for all the great content! I’ve already learned a lot especially about incorporating LEDs into builds. If you ever feel like tackling a slightly different format for a video, I’d love to see your process for a non-speed build. Your models already look great so it would be cool to see what you do differently when you’re focused on every detail especially if you use any other techniques we haven’t seen in your videos yet.
I am currently working on MG Seven Sword/G and I managed to put an LED into wrist without losing any articulation. It was a huge PITA to set up though...
Yeah dude, that Tamiya scriber will betray you in a heartbeat. 😆
Also, have you seen the X-Base wireless LED setup? Could possibly be an option for doing the wrist.
Were those some sort of scribing stencils that he had?
OMG !!! Extremely cool 😎!!!!! Masterpiece for sure !!!
Great video!
i have to agree with you-the design of the kit is not optimal for standing and posing. I made a custom painted 7-seven version myself. While the shape and overall design is amazing, the weight distribution is so off...i love your custom LED btw. and want to know more on the paint that you use. are they better than Mr. hobby or tamiya?
Awesome kit and love how you cuztomize it bro
Gahhhh u have me all sorts of excited to start mine. But alas I need to finish my current kit lol
Setsuna!!!❤️❤️❤️
Gorgeous 👍👍👍
Great work as always!
Your a gundam beast
What scriber set are you looking at that will place your current 1?
Will you ever do the RG unicorn or
HG amazing exia ever ?
(Also do recommend any certain model kit tools cuz am buying some soon)
I know I said this before, but I'd _really_ love to see Bandai make an RG GN-0000+GNR-010/XN 00 XN Raiser.
The amount of LEDs required with most of these in itslef a mini fortune if you want to have LED for all of the area.
@xxnike629xx I know I said this before, but even if Bandai actually announces a RG 00 XN Raiser, sure you'll gonna hoard multiple *BOXES* of it...
(which results in another financial problem, and you've no right to blame anyone but yourself...)
But it's a sure thing too that you'll never build the kits inside those *BOXES*
You know why?
Because you're a *COWARD!* 💩💩💩💩💩💩💩💩💩💩
@xxnike629xx I wonder what *LIES* and *FAKE NEWS* against me you'll gonna pull from your ass this time. And to whom you'll gonna give your false BS next? 😮
If you want a better chisel buy Madworks or BMC but they are not cheap.
are you wearing a top coat?
damn .. how to unseen it .. there is no way i can build my kit like this
can you mod led for MG 1/100 gundam Fenice rinascita ?
Enjoyed the series, but I have never been a fan of the Raiser. The paint work on this looks beautiful as always though.
More beautiful than PG.
I see PG OO in model shop
Nomal PG no custom paint is very drab.
so how well do these acrylic paints last against posing a kit?
They actually last pretty long if you got some top coat on. The only one that I would say would get scratched off is enamel paints. Enamel is the weakest, lacquer is the strongest
@@hyperion2109 enamel is the weakest?! I was under the impression acrylic was the weakest because not only is it safe to spray indoors, but it's also dirt cheap and water dissolvable! my life is a lie
@@oooppiikkk enamel is oil based , and is pretty weak , acrylic is in between , reliable and not toxic
🤘🤘🤘🤘👏👏👏👏👏
are you selling your customs?
It's currently 10 past midnight for me as i am a European
3:04 what is that tool called?
I enjoyed a great video let's be friends.. 😁😁😁😁😁😁
우리 친구 해요.
Uhh
First
NEXT ⇨ 7 SWORD G