Це відео не доступне.
Перепрошуємо.
How to Fix Custom BeyLauncher LR (Part 1) - Ft B-184 Takara Tomy Beyblade Burst DB
Вставка
- Опубліковано 8 лип 2021
- One of my buyers returned his B-184 Custom BeyLauncher LR to me to get it fixed. I took this opportunity to demonstrate how to fix this launcher.
However, I did miss one step in this video. So, make sure to watch part 2 to learn how to properly reassemble the launcher after it's fixed.
• How To Fix Custom BeyL...
=================
More Related Videos
=================
Playlist: • How to Fix Launchers
===========================
All Products Featured in this video
===========================
B-184 Custom BeyLauncher LR
===========
Buy From Us
===========
We sell Takara Tomy Beyblade Products & Parts
➡︎ All selling platforms: linktr.ee/beyf...
➡︎ Our official site: beyfanstore.com
===============
Subscribe With Us
===============
➡︎UA-cam: @beyfanstorechannel
➡︎TikTok: @beyfanstorechannel
==========
Contact Us
==========
linktr.ee/beyf...
#beyfantutorial #custombeylauncherlr
#beyfanhowtofix #howtorepair #beybladelauncher #beybladeburst #takaratomybeyblade #beyfanstorechannel #beyfanstore
Oops! I missed a step in this video. Check out part 2 to see how to correctly reassemble the launcher once it's fixed. ua-cam.com/video/Yzm6nJjLYtE/v-deo.html
Thanks 👍 I fixed my launcher❤
Hi guys! I found a solution for the dangling string that most of you have been experiencing after following this guide. You can rotate the string container counter clockwise twice while it is clipped into the string plastic contraption, then use the two gold clips and put them in place. This will maintain the tension and also keep it from hanging. Make sure to hold down the top-most gold piece while inserting the rest of the pieces and screws. That's it!!
Thank you for this video I thought I needed to buy a new lancher because I just bought this launcher a couple of days ago thank you so much ❤❤❤
Thank you, I would have to buy an entire new launcher if not for this video
Me too
I have that launcher problem, but brute force just fixed it back
Oh ok
Btw guys dont be as stubborn as me cause it broke a few days later😄
@@BeyfanStoreChannel What do I do if it won't retract.
Ok I just tried to use my db launcher but for some reason when I put it on right spin it works for left spins and viscera, what do I do
@@epicencarnet5297 just pull it again and it will reset the launcher and you are all set
Didn't work for me skittle
Woah thank you for this vid, I just bought a brand new db launcher and it got stuck suddenly. I have managed to fix it by watching this tutorial thank you!
I am
I love this video so well made and super clear. Having someone whiling to disassemble these launchers and figure it out is so great. I look forward to even more videos from you!
Thank you!
Luckily I didn’t end up needing to dismantle mine. It was brand new out of the box, and I had the trouble where it would not retract unless I wound it back up myself, then after launching fast and winding, launching fast and winding, and continuing that process it started to retract again. I think sometimes the issue is also that the fresh gears don’t always mesh together nicely until they are broken in. It’s kinda like the launcher needs some warm up launches first haha.
I had the same issue but its not retracting yet lol maybe more time
@@vithusanvijay8478 manually wind it up just a few more times, and launch and repeat
What kind of screw driver you use?? I want to know
@@BeyfanStoreChannel alright...thank you so much
Life and bey launcher saver! Thank You
When savior Valkyrie comes out can you unbox it all the parts
Thank you!
I just bought the bu set of Hyperion and Helios and I think my launcher broke how do I fix it
same here
( if any one else has the problem with the string just being stuck and not fully un coiled DO NOT OPEN THE WHITE GEAR the spring willfallout and u will be unable to recoil it back and put it back) IN SHORT IF U CAN ONLY PULL THE STRING A LITTLE BIT SKIP 0:55 AND GO TO 1:44
You can coil it back in, it’s pretty easy to do with the correct method.
i got shocked when my coil just jump out from it 1:04😱😳
hmm it can't spin 😮💨
Thx bro u just saved me some money
Help me please I have a flame db launcher just a few launches later the spring tangled itself and I don't have any more money to buy a new one😢
I got my db lancher a couple days ago but when it came it was broken but not the lancher system the part of the top pice broke of is there a way to fine a replacement part form other lanchers?
bro what screw driver did you use
He sells them at hiis shop
It is just a normal screwdriver that you could find in the market. If you want the exact type we're using in the video, look for screwdriver pen multi bits. Ours comes with PH2, PH1, PH0, PH00, V3.5, V3.0, V.2.0, V1.5
@@BeyfanStoreChannel ah okay thank you
my problem isnt the string being stuck.,.....its the fact that the cord doesn't retract when i pull it
same
same
We did refer to our previous video which we show how to fix the metal coil issue. Hope it helps. ua-cam.com/video/O6OvZV82UaU/v-deo.html focus on 1:48 to 3:16
how do u make it so that it retracts fully instead of it dangling
I have the same issue
Lo me too
Facts
You may want to go through the process again and see if the metal coil is in the right shape and also make sure when you manually roll the string the length is just nice to fit in before putting everything back.
@@BeyfanStoreChannel hi there, 10 months ago i managed to fix my launcher with your helpful video, but now when i launch hard the string doesnt go all the way in there is still 2 inches left so i have to manually do it, whats the fix?
Always loved ur vids man keep it up.😀
Why mine is weak when i pulled the string its doesn't come back and weak launch
My db launcher’s string completely came out of the launcher so now it doesn’t even have string anymore.
Same I made a video abt it
2:15 is the spring color gold?
@@BeyfanStoreChannel 0:23 the spring in the A1, is it silver too??
What do I do if it won't retract.
Ok I just tried to use my db launcher but for some reason when I put it on right spin it works for left spins and viscera, what do I do
@@BeyfanStoreChannel ok thx
@@epicencarnet5297 hey what did they say
@@pepperthefish it means the spring is misplaced so you have to open it and fix it
One thing i want to tell ya is to buy a lr launcher for quadrive beys cause a lr launcher can go forward or backwards
Thanks!
I did everything seen here but my string still doesn't retract, I don't know why it happened, it's been not even a day
my launcher makes a weird noise when i launch
Mine does and has a retraction problem
same
What can i do something about the internal parts of the launcher like the metal spring inside. Can i make it shorter so it doesnt "scrambled" the the spring and make my string longer?
Hoping you'll see my comment.
Can you do it with flame brand launcher
my lil bros are very squeaky, is there a tip where i can eemove the sqeaks or its just normal
Just blow on the gear like if you are blowing dust out of it
Silicon spray dude, a bit of lubricant can do wonders.
Can B184 can have a longer string?
@@BeyfanStoreChannel if i change the string to the longest string i have, can it ba damage the internal parts of the launcher?
You will most likely do less damage with a longer string, as you will run out of armspan before giving the internal gears a shock when the string stops.
This fixed mine but now the cord doesn’t fully go back in side I have to do that myself
Aldo mine do that, i think Its normal . The power is the same ad i dont really care about It
Little late, but found a solution! You can rotate the string container counter clockwise twice while it is clipped into the string plastic contraption, then use the two gold clips and put them in place. This will maintain the tension and also keep it from hanging. Make sure to hold down the top-most gold piece while inserting the rest of the pieces and screws. That's it!!
@@crisxii6225 Little late, but found a solution! You can rotate the string container counter clockwise twice while it is clipped into the string plastic contraption, then use the two gold clips and put them in place. This will maintain the tension and also keep it from hanging. Make sure to hold down the top-most gold piece while inserting the rest of the pieces and screws. That's it!!
My power db launcher on savior valkyrie have a raspy sound after i launch it idk what is the problem inside of the launcher
Same when my string retracts it has a scratching sound
@@friendlyguy1180 same its need fixing
same with my b-191 launcher
@@8AimL damn that sucks especially since that is one of the best launchers
@@friendlyguy1180 I "reloaded" the metal cord and now its like brand new again
Thanks
Whats your screwdriver sizs pls reply
It is just a normal screwdriver that you could find in the market. If you want the exact type we're using in the video, look for screwdriver pen with multi bits. Ours comes with PH2, PH1, PH0, PH00, V3.5, V3.0, V.2.0, V1.5. Couldn't remember which bit we used exactly.
How to fix if it wont retract
Check out part 2 to see how to correctly reassemble the launcher once it's fixed. ua-cam.com/video/Yzm6nJjLYtE/v-deo.html
Thank
First day buy 2h later stuck
How to fix when my string has cutted down
Omg Ty so much
My launcher has a different kind of spring from yours. 😱
Hey, can you tell me how to fix db launcher that cannot retract?
We did refer to our previous video which we show how to fix the metal coil issue. Hope it helps. ua-cam.com/video/O6OvZV82UaU/v-deo.html focus on 1:48 to 3:16
The purpose of this video is not just to show how to fix the particular issue you have seen for this launcher but also to demonstrate how to open up and do a thorough check and put them back together. You may want to give it a try.
help me there is this metal thing on my fake db launcher
@@BeyfanStoreChannel oh ok thanks
Nice
What size tho
The screw driver to open the um launcher
Hi! My younger brother just bought this launcher, and it began to do raspy sounds. I really don't if its reparable or if its just broke. Can anyone please help me out? my lil bro got really up upset when it started to do the noises.
It's reparable! I had that problem and this video helps to fix that trouble!
Not sure what's the exact issue. But the purpose of this video is not just to show how to fix the particular issue you have seen for this launcher but also to demonstrate how to open up and do a thorough check and put them back together. You may want to give it a try.
Sip
i tried to open the smallest screw on the driver unit and the screw stripped. now i will never able to fix my launcher anymore
Buy another screw ?
Or launcher 🚀
@@iam_RSH yes i bought one more launcher =)))
💯💯💯💯💯
I just bought saver valkyrie from beyfan can i join the give away
How to fix it cause I cranked it too much btw I use blue lr launcher from dynamite battle
So first make sure that the launcher has that white thing then move that white or black thing in the right or left just don't move to the one you cracked so just try move the black or white thing right or left
It dint fixed mine
How to fix
The hardest part is that the metal string thing came off so I spent about 30mins fixing it (disasters....)
anger fix my problem i just broke it
5th
The normal way: buy another one
Second way: Change to body of the launcher
Third way: do like what's in the video
Fourth and most easiest way: Grab ur Fafnir bey and don't use a launcher at all lmao😂🤣
hi do you knwo how to fix this kinda issue with the db launcher my left lauch string is working 100% but the right launch is not thestring does not return after pulling it
The purpose of this video is not just to show how to fix the particular issue you have seen for this launcher but also to demonstrate how to open up and do a thorough check and put them back together. You may want to give it a try.
Thanks!