There are 4 bolts that come loose behind the steering wheel that cause the wheel to tilt when you pull it, like it does at 10:20 Install some thread locker and tighten them down and it will fix it. Common 3rd Gen problem. (like so they can see please)
Another fix would be to add an IAC motor (that bolts to a flange like Honda/etc) that the Holley can run or just a needle bleed valve for a very fine idle adjustment. Similar to drilling a hole in the throttle plate, but reversible not as ugly.
It's not the column mount bolts, it's a tilt column with a busted pivot pin. I can tell by the way the wheel is being pushed back up under spring pressure. That problem is so common I used to keep a couple in my toolbox in the 80s and 90s.
All u need is about a foot of 1/4 drive extensions, a 1/4 drive wobbly adapter and some torx bits to fix it. I've tightened my share of 80's GM tilt columns
Logged in just to thumb this and leave my support. Print the dyno sheet. Hell, print the dyno sheet and get a rear window decal made with it for Toast! Big ass 1776 across the back.
Any other shaped rubber coolant pipe should do fine. The one they have on there is pretty much configured in the worst imaginable setup for that blower belt. They might even luck out and be able to just take the pipe off and reverse it to get some better clearance.
Lol okay first of all there IS A CLUTCH IN THE CAR!! The car IS AUTOMATIC NOT A MANUAL like I ASSUME the poster meant by slipping the clutch and launching the vehicle BUT the clutch it has would not be able to manually slip and launch like a manual because it’s an automatic... either way manual or automatic both technically have clutches.... sooooooo yeah lol 😂 🤫
@Fire Tribal... okay pal next time you go do s fast google search read the whole thing not just what you want to read lol... inside your little torque converter is a thing CALLED A CLUTCH!! 😂 FFS!
I'm sorry Cleet but we're gonna have to rename this beast to "The Intimidator" Like the immortal Jables once said in that one movie "it's the only whay"
Hey. I hope you guys read this. Have Profab or a local shop machine a restrictor plate to go between the blower and that intake. Make it so it only has like a 50-70mm hole so it can tune easier like a normal engine and still has that roudy look of the 3 way throttle body. Make it out of aluminum and like 1/8 inch thick and you'd never know. Then you can floor it and really open the flaps for a cool look.
if they try a fly by wire throttle they should be able to come up with a progressive throttle. Working on getting the butterflies centered in the bores and any other vacuum leaks fixed and he can use an idle air motor. It takes a bit of work to get a blower motor to idle...
and thats probably why you dont have nice things lol. freee revving high output motors especially with supercharges does damage to valvetrain, should only be revved under load.
Yeah that coolant pipe is going to cause issues down the road. If that blower belt goes, and I've seen a couple of them snap, it's going to tear right through that pipe. Either a hard 90 degree bend to get behind the belt, or something straight forward down the middle, and then add the bend closer to the radiator.
They wouldnt know they havent driven it yet until later in the video hint the title said first drive and this wouldnt be the ideal highway car its mainly a show car/burnout comp car
I believe they plan on doing atleast the plumbing and fuel tanks for the turbine. Also handling the complete gas engine assembly. I think they addressed that in the last mullet update?
@@leebrink4570 - 'cause they are so complicated that something will malfunction . So you need a back-up. If you go with just a rotor and a stator (Tesla) you are less likely to have an issue. (I like my itty - bitty - Nissan Leaf) Once a year I check if it may need additional washer fluid.
@brian770 Believe me, I wasn't try to take anything away from him, just meant they're struggling a little bit. And when they're done with Summer Nats, Toast needs to be a Big tire car. 😁
Coming back to this and 2023 and hearing Jackstand say “I’ve never really worked on a blower car , but I’ve been around them” made me actually laugh out loud . Fast forward that’s a lot of what he’s working on now 🔥
I say add 600 after tune With a bottle 2300, this thing will need a full kit of spray. I say need with a grain of salt, it'll still roast tires with ease. I don't wanna say Toast tires cause the Intimidator is much better.
@@kevinpatriarch6719 the reason you never see video on the jet car is because theyre litteraly doing so much work to the body to make it stable that its in a shop 24/7
The two are like peach cobbler and vanilla ice cream! Hoonigan scumbaggery and cleetus balls of steel make amazing content. Y’all must be new to his channel if y’all didn’t see past episodes. Hahaha!!!!! Shit would be SICK!!!
It's funny now after Toast's accident in the burnout pit, Cleetus revealed how he never not even 1once felt like he had *any* control over Toast, within any point in time driving it between this video & Toast's final burnout.
This guys such a character 😂🤣. “Holy sweet honey bbq” and then the “we don’t need this laptop where we’re going” too funny. Where we’re going.... we don’t need roads
I absoloutely love it brother. My dad was waiting to see this all finished. We lost him unfortunately last week. He would have a smile from ear to ear hearing that rumble. Was a huge American muscle fan. #blowerlife #toast #1250hp
That sucks man, sorry to hear it. I lost my dad back in high school(many many moons ago). The pain of the loss is unfortunately just part of the love. Glad to hear that you had something as cool as cars to bond over. A "toast" to Kenny's dad. Better days brother.
Thanks mango an greg. It hasn't been easy to say the least. But I can say we have some good memories of him. He was my dad an my best friend. I'm gonna miss him so much.
Considering his knowledge base is LS style engines, this is a whole new world for him. He hasn't put in near the time he's invested in leroy, and toast is gonna be catching up to ruby and leroy both with nowhere near as much effort.
might be a good idea to make the radiator hose out of AN line or weld a pipe for it... just as an extra precaution. The Camaro is looking badass though
Squishy Wednesday There’s plenty of good reasons coolant hoses are flexible and not rigid, but there’s other ways to protect the coolant hose from a blower belt breaking.
I'm not sure if its a safe thing with supercharger belts to do but I'd make a little roller setup with some rollers and bearings. but that might not work very well idk
I paused this video before watching it. I have been waiting for this video since that summernats… this is OG Cleetus. This is why we have watched and are top fans. We all love you* cleetus but this is why we fell in love. Burnouts and motor builds!!
Cleetus,you need to do a metal upper radiator hose when running a blown car. Summit Racing® Radiator Plumbing Kits SUM-380667 The amount of pressure will explode the hose
THE BOYS ARE COMMING TO OZ WITH THE CAMARO BIG BLOCK CHEVY FOR THE SUMMERNATS BURNOUT COMP CLETUS KNOWS WHO'S GOT THE SHIT WHEN IT COMES TO DESTROYING TYRES .THE BOYS FROM THE USA ARE ALWAYS WELCOME TO COME TO AUSTRALIA SEE YA AT THE 2020 OZZY SUMMERNATS
Brings back memories. Had an '84 Z28, black, t-top, built it from the ground up and started driving it at 16. Only difference is mine had Eagle Alloy wheels that looked like ninja stars but they were also polished aluminum. 355, .501 cam, gear driven, 3.11, turbo-350 with Hurst ratchet shifter. Those were the days. Fastest car at school. One kid had a home-built turbo Talon that could get me if we started at a roll but I got him every time from the line (the light at the exit of our school). I miss those days. No worries, all fun.
Coop has become like the most SAVAGE sarcastic watch yo ass cause he's watching and waiting type of dude. Love every moment. Best one for 2019 was at LS Fest. " Why don't you sweep the shop like that?" #shotsfired
Artem Levin they aren’t even done with it like the steering was stiff and the seat too foreword and that rumbling isn’t good, when it’s finally fixed it should sound like it’s going to break every window and turn every car alarm on. They need professional help
You need to add the safety straps to the blower. There is either three or four that goes on each side to hold a blower in place in case you lose the blower. Also I hope you take it a few times to the track before leaving. I would really love to see what quarter mile times you can get. I know you built it for one use there's nothing that says you cannot use it for two different things.
I finally realized what I habe been doing wrong while driving. I need to have my laptop in my lap opened so I dont have to pay attention to DRIVING the car.
I remember a buddy had a 1979 Ford F350 with a 460. It was a built truck on 44's and with a 3.50 it would smoke the tires. It took 10 gallons of gas to drive 10 miles to school. He took it in a road trip once and stopped at EVERY GAS STATION even with a 50 gallon tank.
I like the name toast but after seeing a guys comment calling it The Intimidator and Cleetus reaction on First drive you could tell it had his adrenaline going when he said it..
When my Civic goes to sleep in the garage at night, and I can see its little wheels twitch like it's chasing a rabbit, I know it's really dreaming about having a supercharged BB.
E vdawg haha. My 89 I practically had the steering wheel in my lap. I ended up having 2 keys. One with chip in the old ignition lock and new one in column 🤣
Lol, I was wondering if anyone else noticed all that flop in the steering wheel. Imagine how sketchy that would feel if you was sideways when that wheel gave a good flop!
Now all that beast needs are front and rear mauler spiked bumper guards, window plating, razor plated rim attachments, and a 100 gallon rear mounted tank. Perfect for the new American Apocalypse-
There are 4 bolts that come loose behind the steering wheel that cause the wheel to tilt when you pull it, like it does at 10:20 Install some thread locker and tighten them down and it will fix it. Common 3rd Gen problem.
(like so they can see please)
Another fix would be to add an IAC motor (that bolts to a flange like Honda/etc) that the Holley can run or just a needle bleed valve for a very fine idle adjustment. Similar to drilling a hole in the throttle plate, but reversible not as ugly.
@@hydrocarbon82 that will fix the loose steering wheel?
@deefoxgaming That's quite common on several GM models from that time era. I've performed that repair many times
And maybe a larger diameter steering wheel might help a bit
It's not the column mount bolts, it's a tilt column with a busted pivot pin. I can tell by the way the wheel is being pushed back up under spring pressure. That problem is so common I used to keep a couple in my toolbox in the 80s and 90s.
The only thing more epic than Toasts idle is the wabble on that steering column when Cleet tries to steer.
Ya I liked the idle.. reminds me of a mopar.. try googling "idle from hell"
All u need is about a foot of 1/4 drive extensions, a 1/4 drive wobbly adapter and some torx bits to fix it. I've tightened my share of 80's GM tilt columns
Needs power steering
Remember the Turbo Whistles???? Old Cleeters came a long way.
Also the duck call blow off valve.
I was just talking to a guy in my shop today about that. Cleetus has built a dream life doing what he loves, that's awesome. 😎
Damn he had so much hate on every single comment
That’s I how I discovered him been watching ever since
Yep, morbid curiosity kept me around lol (^^)b
The duck call exhaust
"How much power?"
"More than your birth year"
"But you don't know m-"
"Doesn't matter what year!"
I don’t get it
Lets say you were born from a year anywhere from 1960-2010 this car still produces a HP number higher than that
Hp>1960-2010
Antreas Konstantinou Ohhhhh😭😭
@@antreaskonstantinou8585 The joke is ruined when you have to explain it :[
shane marz r/IHaveReddit
If y'all don't tune this car to make exactly 1776 wheel hp, the internet is gonna be sad
LOL
I was thinking 1320, but I like 1776.
Logged in just to thumb this and leave my support.
Print the dyno sheet. Hell, print the dyno sheet and get a rear window decal made with it for Toast! Big ass 1776 across the back.
Master B. I was also feeling 1320, but would love 1776
Fuck with that big ass blower 1700 on idle probably 2khp at 6k rpm.
At idle, this thing sounds like it is chewing on Prius.
5:24
Lmao sounds like it would eat Mustang's too 😂
Haha not to mention drink enough black gold to have to invade another middle eastern country for. America fuck yeah lol
Hahahaha!!!!!!
Dead!!!🤣🤣🤣🤣🤣
1320hp. Please hard pipe that coolant hose before the belt destroys it
caleb h haha I think it would destroy itself before something else does to it 😂
Yes!
@Jake Heke lol got him
Any other shaped rubber coolant pipe should do fine. The one they have on there is pretty much configured in the worst imaginable setup for that blower belt. They might even luck out and be able to just take the pipe off and reverse it to get some better clearance.
I thought you were talking about the outlet before they took it out of the shed. Surprised it lasted that long.
"600 hp idle", that was hilarious!!!
So glad he didn't sneeze when letting out the clutch y'all would've ended up in the future!
I know this is probably a joke, but there is no clutch.
Lol okay first of all there IS A CLUTCH IN THE CAR!!
The car IS AUTOMATIC NOT A MANUAL like I ASSUME the poster meant by slipping the clutch and launching the vehicle BUT the clutch it has would not be able to manually slip and launch like a manual because it’s an automatic... either way manual or automatic both technically have clutches.... sooooooo yeah lol 😂 🤫
@Fire Tribal... okay pal next time you go do s fast google search read the whole thing not just what you want to read lol... inside your little torque converter is a thing CALLED A CLUTCH!! 😂 FFS!
@Fire Tribal not all autos use a torque converter
@@YOU_CREATE_YOUR_OWN_KARMA_369 inside a torque converter is a fan that pushes fluid onto a plate that not really but kinda works like a clutch
I'm sorry Cleet but we're gonna have to rename this beast to "The Intimidator"
Like the immortal Jables once said in that one movie "it's the only whay"
Every1 vote. Change that name
+ for the intimidator
Let's take a dip in the Strawberry River!
@Big Rock "No0H" haha
or master exploder. "i did not mean, to blow your mind, but that shit happens to me all the tiiiimmmeeeee!"
Hey. I hope you guys read this. Have Profab or a local shop machine a restrictor plate to go between the blower and that intake. Make it so it only has like a 50-70mm hole so it can tune easier like a normal engine and still has that roudy look of the 3 way throttle body. Make it out of aluminum and like 1/8 inch thick and you'd never know. Then you can floor it and really open the flaps for a cool look.
I was thinking the same thing from day one has to be a normal thing to do right?
1675 HP. Can't wait to see and hear the dyno 'full pull'
Great idea.
if they try a fly by wire throttle they should be able to come up with a progressive throttle. Working on getting the butterflies centered in the bores and any other vacuum leaks fixed and he can use an idle air motor. It takes a bit of work to get a blower motor to idle...
Fuck that! Dale HATED restrictior plates!
They have so much self control I’d’ve been revving the ever loving shit out of it immediately
and thats probably why you dont have nice things lol. freee revving high output motors especially with supercharges does damage to valvetrain,
should only be revved under load.
@@tom4208chill it was a joke 😂😂😂😂
Cleet: this is the craziest thing we ever build
El camino: starts to cry
Laugh my ass off
Well they aren't building the el Camino
But stil pretty funny 😂
Mullet isnt done yet
Yeah I know
Leroy: hears toast at idle *nervous laughter*
*chuckles* I'm in danger.
THE WAR IS COMING FOLKS !
~+1600HP Twin-Turbskies VS. ~+1600HP Freakin' Blower !
ua-cam.com/video/eGdKF-WoKi4/v-deo.html Nothing like riding in something Blown
Chuckles: I'm gunna loose
Every time a mullet reaches shoulder length an angel gets its Iroc Z
James owes us a mullet! The other video got 200k likes!
Underrated comment brother 😎
Comment of the year
The amount of mullets I've had in life. There must be some happy angels
And everytime an IROC Z does a burnout, an angel grows a mullet.
This guy's personality is like he watched king of the hill his whole life growing up 🤣
Lol
I'm sure he's wearing eyeliner.
Or a juice wrld concert
Nothing wrong with that
truly, it's what you get when you give FloridaMan a YT channel
I like how the engine doesn't even smooth out til the car is going 30mph. Haha.
it took me like 10 sec to realize that it's normal to sound that ruff xD
Dave Cook sounds beautiful you try to get a 10L engine to idle at ~1000 RPM
That's actually poor workmanship,ecu ,timing ,so many things need doing on that lmfao
It craves speed to work.
@@shaundavidssd big cams probably
💯💯 TOAST POWER: 950 on a bad tune. 1550+ after the giraffe treatment.
was going for 930 myself!
@cleetus, cooper ...... be nice to win a Toast shirt for guessing correctly ;)
Nope. No shirt. :/
Horsepower: Yes.
Torque: Many
Freedom: All of it.
All the torque, i'm wondering how much it'll make
Scorpio a lil bit more than a Prius
Cringe: to the max
Thumbs up twice.
Hotel? Trivago
Love it when these pop up on my feed 4 yrs later. Still a good watch
"whole other level, i am intimidated"
translation: please god, i really hope i dont wreck this, my entire mullet savings went into this engine.
You guys should do hard pipe radiator line near blower.
Yeah that coolant pipe is going to cause issues down the road. If that blower belt goes, and I've seen a couple of them snap, it's going to tear right through that pipe. Either a hard 90 degree bend to get behind the belt, or something straight forward down the middle, and then add the bend closer to the radiator.
Meh easy fix
No doubt tho... That's exactly what I was thinking.... Or even extend the belt guard and have it between the hose and the belt
Mr perfect
marc jordan Yes I was wondering why they didn't make a bigger guard for the belt?
"How American are you?"
Cleetus: "10 Liter engine"
Use cubic inches even more murcia
@@kiyoponnn You're either a troll or a genuine clown. Whatever the case may be you're flagged.
@@paulallen8109 And you're just a dumbass
"How American are you?"
Cleetus: "Two and a half fucking gallons"
Paul Allen stop acting like a bitch lmao
Me: How many miles per gallon?
Cleetus: Miles?
100m/L😁 (metres/litre)
They wouldnt know they havent driven it yet until later in the video hint the title said first drive and this wouldnt be the ideal highway car its mainly a show car/burnout comp car
How many gallons per mile
Cleetus: You mean gallons per mile, right?
Miles? Oh you mean F E E T?
Cleetus: "Craziest thing we've ever built"
Mullet: "Am I a Joke to you? "
Mullet isnt built yet.. so more like
Mullet (in Jack Nicholson voice): wait till they get a load of me..
He didn't build mullet either
DoggoZA 😂😂😂😂 funniest thing I’ve read all day
@@brycerobbins875 well hes not a roll cage or frame specialist is he? I'm sure he'll be putting the motor in as well as the turbine.
I believe they plan on doing atleast the plumbing and fuel tanks for the turbine. Also handling the complete gas engine assembly. I think they addressed that in the last mullet update?
This is more American than high cholesterol
hyoussef99 u freaking fool 😂😂😂👌👌👌
hyoussef99 f
lmaooo
Um,
Iroc Z is an Italians Car...
Just saying.
Back in the 90's they would wear Z- cavarichees driving this car.
Captain Mike K yea...Italian Americans
Completely useless and unnecessary in every way.
I’ll take 2!
Two, what the hell you gonna do with two of those things? A person really needs only one... For everyday of the week that is
I'd use it as my stress reliever hahaha and stress relievers are very necessary in life hahaha
@@leebrink4570 - 'cause they are so complicated that something will malfunction . So you need a back-up. If you go with just a rotor and a stator (Tesla) you are less likely to have an issue. (I like my itty - bitty - Nissan Leaf) Once a year I check if it may need additional washer fluid.
@@richardhobbs9038 unacceptable, you probably think a nissan juke looks better than a gtr dont you?
@@OscarMartinez-dy2sh - I find music is a great stress reliever , and Angelina Jordan works wonders . ! ! !
ua-cam.com/video/p8kAL-sGJx8/v-deo.html
Here in 2024. RIP toast. Thank you for saving cleetus from that wall brother. Best starter big boy burnout car ever.
You know the car is bad, when someone who regularly drives a 7 second car is intimidated.
Wijibo good call dude!!
8 second*
He hasn't made it back in the 7's for quite a while.
@@katiebethsdaddy dont matter, it made it there several times so .....its a seven second car. potential proven and that cant be taken away.
@brian770 Believe me, I wasn't try to take anything away from him, just meant they're struggling a little bit. And when they're done with Summer Nats, Toast needs to be a Big tire car. 😁
I don't know how much horsepower, but be sure to wear your brown pants when you drive it
the whole time James just looks like a proud dad
Coming back to this and 2023 and hearing Jackstand say “I’ve never really worked on a blower car , but I’ve been around them” made me actually laugh out loud . Fast forward that’s a lot of what he’s working on now 🔥
>test drive of a 10L supercharged car
>doesn't wear the seatbelt, keeps staring down at his laptop
classic
Yea morons
You cant look like that, and be too bright.
"Danger to manifold"
@@1980bwc Rude🤣🤣🤣🤣 Also, it would seem that the same applies to you(unnecessary usage of a comma)
Hes looking for wifi
I’m calling 850 off the rip, 1200 after tune, and 2000 after James gets the bottle
I say add 600 after tune
With a bottle 2300, this thing will need a full kit of spray.
I say need with a grain of salt, it'll still roast tires with ease.
I don't wanna say Toast tires cause the Intimidator is much better.
More like 3 bottles. That engine will eat a whole bottle of nitrous idleing for 30 second
Also this engine makes 800 without the blower lol
@@wesley8599 It made over 800hp to the crank NA
900 before tune, 1300, after tune,1900+ with bottle
When it started lopeing/surgeing I had a big smile on my face love that sound
Me too been along time since I heard a big block lope that hard still smiling after the video
Could feel it from the video.
Cletus: "Cooper this thing is dangerous"
2 15 second ads pop up: USAA and Geico insurance
"craziest thing we've ever built" just wait until the jet car is done
The jet car makes me nervous, all kinds of ways, and it always has since they announced it.
@@meltingpotracing U R NOT THE ONLY ONE BY A LONG SHOT!
The jet car reminds me of those jet cars in the game flatout
@@kevinpatriarch6719 the reason you never see video on the jet car is because theyre litteraly doing so much work to the body to make it stable that its in a shop 24/7
@@meltingpotracing especially after the death of the young jet car driver from the company they're working with...
Zack over at hoonigan would be weeettt!!! That chop is 10/10!! This thing better come to the burnyard!!
YES. Toast Test and Tune day at the yard.
I Second this opinion!
The hoonigans don’t deserve cleetus
No one cares about hoonigain. This is the cleetus McFarland UA-cam channel
The two are like peach cobbler and vanilla ice cream! Hoonigan scumbaggery and cleetus balls of steel make amazing content. Y’all must be new to his channel if y’all didn’t see past episodes. Hahaha!!!!! Shit would be SICK!!!
Watch this thing slowly and accidentally turn into a Pro Mod car
I hope so
That would be awesome.
Honestly, I expect nothing less after straya
I expect nothing less than 2000hp out of this thing very soon.
Same thoughts. And it would be interesting to see them get into serious 1/8 mile racing. Seems like a decent setup for it.
It's funny now after Toast's accident in the burnout pit, Cleetus revealed how he never not even 1once felt like he had *any* control over Toast, within any point in time driving it between this video & Toast's final burnout.
Firmly gonna be 1776 horses 🇺🇸🇺🇸
GOD BLESS 1776 AMERICAN HORSES!
Haha! That would be neat as shit
1346 HP. That thing needs a red white and blue wrap ASAP
It'll gonna make 1320hp, mark my words
Which one🇬🇧🇷🇺🇫🇷?
My guess will be 1776 hp, the number of freedom
Matt hahahah
Haha would be a great number for you Americans, but that things making 2000+ easyyyyyyyyyy
@@Noski699 🤣Its sad that people from other countries knows more about our history then a third of the population does.. 😔
The slaves would disagree with you🤭
Very nice
This guys such a character 😂🤣. “Holy sweet honey bbq” and then the “we don’t need this laptop where we’re going” too funny. Where we’re going.... we don’t need roads
1253 hp... Side note you guys should wrap toast in a merica red white and blue flames
Yessss
alex freeman it should be wrapped the american flag with bald eagles on the sides
Add some freedom straps to the charger in case it pops.
With a Bald eagle on the side
With a big ass eagle on top
Official guess: 1776 hp 🦅🇺🇸
A man can dream can’t he?
Dave Micolichek if this blower even sneezes it will make 1000hp I wouldn’t be surprised if they try and make close to 2000
@@bobroberts1515 R.I.P everything south of the flex-plate crank bolts.....
@Dave Micolichek The block is cast iron that motor can hold over 2000 horsepower
ITS OVER 9000!!!!!!
Never left a 1320 video so fast in my life
TT_LSX_SUPRA me too
I was watching the boosted boiz ls supra video. Had to see Mullet
@@brettgidney4346 this aint mullet
No shit me to lol
1320 Who? Lol
So much has changed in 4 yrs absolutely incredible what this man has done and brought his whole team with him !
This needs to be vinyl wrapped with a giant merica af flag before it goes down under for Nats.
And gotta have the tops out
No, it needs to get side vent exhaust like the Ford Falcon XB from Mad Max
This is a completely unnecessary thing to create. God I love America
As i hate lmao
Maggot
Murica. Love it.
Hamzah Mulla liters not gallons
Hamzah Mulla Well, guess what. Nobody cares
I absoloutely love it brother. My dad was waiting to see this all finished. We lost him unfortunately last week. He would have a smile from ear to ear hearing that rumble. Was a huge American muscle fan. #blowerlife #toast #1250hp
That sucks man, sorry to hear it. I lost my dad back in high school(many many moons ago). The pain of the loss is unfortunately just part of the love. Glad to hear that you had something as cool as cars to bond over.
A "toast" to Kenny's dad. Better days brother.
Sorry for
Your loss.
Thanks mango an greg. It hasn't been easy to say the least. But I can say we have some good memories of him. He was my dad an my best friend. I'm gonna miss him so much.
I love that he passed a prius in that thing... They had to feel so defeated...
Prius’ blow who the hell would even buy that car? Especially a male,I wouldn’t even ride in someone else’s Prius ugliest car ever.
That
Prius just shit it's pants!! It's like a guppy meeting a Megalodon, LMMFAO!!!!!
@@toddprater14 I live in Flagstaff and 80% of the cars are subarus or prius's... virtue signalers..
First engine Cletus is afraid of... never thought I would see that
Considering his knowledge base is LS style engines, this is a whole new world for him. He hasn't put in near the time he's invested in leroy, and toast is gonna be catching up to ruby and leroy both with nowhere near as much effort.
I'm pretty sure you'll se that again... ElCamino with a Jet. That'll scare anyone. And those not scared of that shoudn't be let near it!
Big block supercharged engines are scary, the amount of torque they produce without much effort is not to be messed with.
@@nielsreiziger4850 very true. That's why they tend to end up in the back of high end speed boats.
I suspect broken drivetrain parts are in Toast's future, that motor is a beast!
0509kj Most likely I wouldn't doubt it
might be a good idea to make the radiator hose out of AN line or weld a pipe for it... just as an extra precaution. The Camaro is looking badass though
Squishy Wednesday There’s plenty of good reasons coolant hoses are flexible and not rigid, but there’s other ways to protect the coolant hose from a blower belt breaking.
so itll wear the belt?) nah, custom silicone is to go. or some kind of idler for belt.
I'm not sure if its a safe thing with supercharger belts to do but I'd make a little roller setup with some rollers and bearings. but that might not work very well idk
When you hear your big cam Camaro idling but it’s just hot for teacher playing
45 mins later Cleetus has successfully backed toast out of the garage
I used to drag here back in high school .that railroad crossing up their is exactly a quarter mile away from here. on green i'm going for it
I live my life a quarter mile at a time.
Retro 67 you're into crossdressing? Whatever dude, not judging but it's a weird place to mention that here
@@kapilbusawah7169 was looking for this
@@kapilbusawah7169 It's a quote from the first fast and the furious movie. guess you have never seen it.
Retro 67 you missed the joke
So Toast gets a big old #3 on it somewhere right? You were intimidated by the intimidator.
The engine is named the Eliminator but it really should be named the intimidator at this point. Dude this thing is insane
@@kiwicami287 Oh yeah. Beautiful chassis with a beautiful engine.
Agreed
I say a full Dale Sticker Job!
I paused this video before watching it. I have been waiting for this video since that summernats… this is OG Cleetus. This is why we have watched and are top fans. We all love you* cleetus but this is why we fell in love. Burnouts and motor builds!!
"How much torque?"
Cleetus: Yep.
@Elmer Cricket Fuckin' sweet!!
Pos chevy
This is seriously my fav build from you guys... this is the hot wheels car us 90’s kids always dreamed of...
I'll second that!
for real
maybe could be a good idea to get that radiator hose made out of polished metal for function and form!
Gas station wants to know your location
Smiles per gallon
Hey that rhymed
Cleetus,you need to do a metal upper radiator hose when running a blown car.
Summit Racing® Radiator Plumbing Kits SUM-380667
The amount of pressure will explode the hose
Now Toast needs his mullet with some rear window louvers.
I support this message
Late 80s rock! This should have been the dark gold iroc
THE BOYS ARE COMMING TO OZ WITH THE CAMARO BIG BLOCK CHEVY FOR THE SUMMERNATS BURNOUT COMP CLETUS KNOWS WHO'S GOT THE SHIT WHEN IT COMES TO DESTROYING TYRES .THE BOYS FROM THE USA ARE ALWAYS WELCOME TO COME TO AUSTRALIA SEE YA AT THE 2020 OZZY SUMMERNATS
I thought that's what they meant with "fine tuning"
You promised us a hood I'm just saying I know we're not there yet but we're watching you 👀
Shiloh Store he promised us a hood on Ruby
@@dantheman9569 and toast he said I know I promised the hood on Ruby but I guarantee a hoods going to be on toast so he even compared the two
Shiloh Store does it really need a hood??
@@THESLlCK by that logic didn't even need a big block?
Pls no hood
Month of freedom isnt enough anymore, started re-watching old episodes
I could literally watch a whole video of just the sound TOAST makes
That sound is like the perfect loop for sleep.
It is truly something else, and even video does not do it justice.
I could go to sleep to that sound 😏😏😏😏
Horsepower: 1776
No other number makes sense
704 at idle!
L R That was beautiful...
L R 😂 I agree, if it’s over 1776hp, then the have to make a tune that makes ax’s fly 1776.
Toast needs to meet Stevie Fast Jackson... aka tuning god and blower genius!!
Yes he does!
How and where. Hook em up
Brings back memories. Had an '84 Z28, black, t-top, built it from the ground up and started driving it at 16. Only difference is mine had Eagle Alloy wheels that looked like ninja stars but they were also polished aluminum. 355, .501 cam, gear driven, 3.11, turbo-350 with Hurst ratchet shifter. Those were the days. Fastest car at school. One kid had a home-built turbo Talon that could get me if we started at a roll but I got him every time from the line (the light at the exit of our school). I miss those days. No worries, all fun.
Nobody:
Cooper: The Cracker Barrel Cruiser
Ricky Vall3y Reid much better name than toast
As soon as coop said that I was like I hope someone commented... sherr nuff, top comment 😂🤘🏼
Props to co-op for losing the dad bod
Coop has become like the most SAVAGE sarcastic watch yo ass cause he's watching and waiting type of dude. Love every moment. Best one for 2019 was at LS Fest. " Why don't you sweep the shop like that?" #shotsfired
Question: how do you do burnout in this Camaro
Answer: Just start the engine
This is a underated comment👆👆✌💪
Artem Levin they aren’t even done with it like the steering was stiff and the seat too foreword and that rumbling isn’t good, when it’s finally fixed it should sound like it’s going to break every window and turn every car alarm on. They need professional help
Artem Levin hehehehe. period.
Just me or did everyone watch this with a giggle/smirk on there face
I was as giddy as a little school girl.
I haven’t even heard it start and I’m already grinning.
Cleetus is definitely related to the guy that was on that one episode of Pinks. Wearing the cowboy hat. They look and sound like twins. Hahahahahah
Which episode?
Every time the engine was running solo no other sounds, youtube generated subtitles were (MUSIC).
Most accurate subtitle ever.
You need to add the safety straps to the blower. There is either three or four that goes on each side to hold a blower in place in case you lose the blower.
Also I hope you take it a few times to the track before leaving. I would really love to see what quarter mile times you can get. I know you built it for one use there's nothing that says you cannot use it for two different things.
I finally realized what I habe been doing wrong while driving. I need to have my laptop in my lap opened so I dont have to pay attention to DRIVING the car.
I think it has a burst plate. Thought I saw one on the back while they were putting it together.
I think they have to get a roll cage before they take it out to the track.
@@andrewm8734 definitely a roll cage for anything over 150 i believe, mentions it way back when they got ruby running
@@BobWiersema can confirm, was right by the distributor irrc.
"Toast the Intimidator"
Needs to happen, he's mean.
Needs the Intimidator Livery wrap!
He only intimidateds in America. At SummerNats Toast will do ok but he won't be intimidating anyone.
@@potaka79 Do you even know what we mean by the Intimidator?
I remember a buddy had a 1979 Ford F350 with a 460. It was a built truck on 44's and with a 3.50 it would smoke the tires. It took 10 gallons of gas to drive 10 miles to school. He took it in a road trip once and stopped at EVERY GAS STATION even with a 50 gallon tank.
coming from an aussie, i'd be surprised if that little rad fan will be up to the task down under.
m8 we all know this thing is not coming back to america in one piece hahaha
Guess you don’t understand how methanol/ethanol benefits in cooling
Yep, that baby radiator during an aussie summer first time that gets in the burnout box will be its last
I'm an Aussie 2 m8 and I wouldn't be to sure there m8
Not on ya life, way too small.
I like the name toast but after seeing a guys comment calling it The Intimidator and Cleetus reaction on First drive you could tell it had his adrenaline going when he said it..
My adrenalines pumping just listening to that thing!! 💪🏻
It’s awesome to see you and Cooper back together you guys really have chemistry
100% calling it, your cooling system is undersized.
Chevrasaki for sure my stock truck radiator is bigger than theirs
Exactly, that single fan isn't going to pull enough air through that radiator. Especially when in low road speed but high engine/tire speed.
Definitely won’t have enough airflow when its swinging around in the burnout pad and holding high revs
IT'S A ALCY MOTOR...!
The one in Neighbor is way bigger.
Everyone: How many horsepower?
This Camaro: All of them...
ahahaha all of de horsesss babbyy
All of them.
@@TechDove that's what I said....
@@jeffreyallen208 I said it again. If you have a problem, solve it in therapy
@@TechDove ahh... a keyboard gangster huh?
"we'll work on throttle linkage eventually" where have i heard that before..... *flash to Ruby and her over the manifold linkage*
This came up in my reccomended. I cant believe it's been a year already
Toast's official birthday is now *Friday the 13th, 2019*
Never clicked so fast in my life! HELL YEAH BROTHER
Liam Tuck 10-4 to that buddy
Check with summernats you might need a firewall between the cab and boot/ fuel cell
Trunk....
@@fredwickenheiser8750 fuck up
When my Civic goes to sleep in the garage at night, and I can see its little wheels twitch like it's chasing a rabbit, I know it's really dreaming about having a supercharged BB.
The sketchiest thing about this video, was the steering column. 😮
I was gonna say the same thing! Looked sketchy
Or the lack of seatbelts?
Common problem with z28 been there done that
You guys should have named this thing the intimidator in honor of Dale Earnhardt. That and this thing is outright intimidating.
Martin Cnossen cleetus needs to see this ASAP
He needs to build a monte carlo if they're gonna do that
Agreed.
Bang....hit the nail right on the head
TOASTANATOR !
I'm just picturing how nice Cleetus is gonna look in this thing with a Mullet.
Don't know what's going to scream more, that procharged 10.3 or Cleetus behind the wheel of that beast
Cleetus, Im here from the future, please fix that front right @12:00 ,
It fails and you hit a wall in 2022 lol.
I have to agree with the other comments on the name "The Intimidator" is way more fitting for this monster
Toast The Intimidator!!! Best of both worlds and makes sense too!
Thank you
It’s fitting but kinda unoriginal no offense
As a fellow 3rd gen lover, please fix that steering column 😂
E vdawg my firebird was the same way annoying to say the least
Dyno?????
E vdawg haha. My 89 I practically had the steering wheel in my lap. I ended up having 2 keys. One with chip in the old ignition lock and new one in column 🤣
Lol, I was wondering if anyone else noticed all that flop in the steering wheel. Imagine how sketchy that would feel if you was sideways when that wheel gave a good flop!
Yeah that thing is beyond sketchy
That coolant pipe is just asking for it.
Coolant hose you mean?
@@daniellee100 Yes
Once they rip a blower belt and hose off theyll figuere something out lol.
The coolant slide is in for a ride.
If the belt pops it's taking a piece of that radiator and pipe with it 😋
Now all that beast needs are front and rear mauler spiked bumper guards, window plating, razor plated rim attachments, and a 100 gallon rear mounted tank. Perfect for the new American Apocalypse-