@@JUNEBUGLLCyeah but you need the shade when you’re outside in the sun. Doesn’t matter how much the camera costs, you can’t see screens well in the sun.
Im not a pro plumber. I used to do it during an apprenticeship but ended up taking a different route. Still do all my own stuff. When my GF's drains stopped draining (after she'd already paid a local contractor $400 to clear it and they didnt even scope the pipes) I cleared the blockage with my drain cable but wanted to see what was in there. I picked up a vevor 165 foot scope because im not going to be using it all the time (again, dont do this professionally) and couldnt justify the cost of a see-snake. But $500 for a camera was priced right. Worked swell, gave me good indication of how far in from the clean out the obstruction was, I could see everything with clear quality. I cant speak for durability but given how often I'll use it for my place and my rentals (should i need to), I expect it'll do. Cheap battery will probably fail from not being used consistently if i was to make a prediction for what kills it. But if you're small-time or something its worth a shot and will probably more than pay for itself before it fails.
I want to thank you for posting your videos. It is a great help to people like me who are trying to learn as much as they can. I know it creates a hassle for you to have to think about taping your work, camera positions, and then going back and narrating the videos, and I want to thank you for your sacrifice in time in doing so.
Looks like just the affordable alternative to the $12,000 ridgid camera snake setup i have been looking for, going to try and get my boss to buy this for our company.
Vevor is doing a big push to send equipment to smaller UA-cam/Instagram channels I’ve been seeing a lot of it lately and of course they are getting this stuff for free so it’s in the channels best interest to talk best about it. Not saying our broski would stoop to that level but other accounts I can’t speak for. Lots of diesel heaters…
Nobody specifically ordered this up, we might call this a rant to follow: Businesses do well to send equipment to various influencers who have audiences of specific sizes and demographic. *** I heard him talk about what he liked and what he didn't like, doesn't sound like a shill. He didn't say he wouldn't accept a more expensive one from a different brand, he didn't say it's all he will over use and he didn't say if he currently uses different products. He highlighted features that would have been written on the packaging, although these products do come with media kits sometimes and they do have features that they encourage you to stress. Ethically these features are still what is marked on the packaging. We saw him unbox and we saw him inspect/used the product. Based on this experience alone, I hope vevor felt enough friction to throw those batteries into the locator wand. His focal point was the price, the general function of the tool, and that the price was equivalent to one service call using a similar tool. *** At three different times I found myself purchasing something from vevor because it was the quickest delivery at the lowest price. One of those was a diesel heater btw. Such heaters are staples in semi trucks and RVs and while I understand I've seen a few vevor diesel heater videos recently, they all come from the same place, are made the same way, with few differences no matter who is selling them... Even espar/eberspacher. I bought the 8KW Vevor Diesel heater because it was in a portable enclosure and cost less than the last one, I purchased it for an RV plain Jane, by nearly $70. Application was in a sizable bell tent for winter camping up north. It did the job by the way. Vevor doesn't make these things, they market and sell these products, function QC and customer service / support (this is where they provide the most benefit) exactly the same way Walmart does when they buy similar things from China or other global vendors. You too can buy a diesel heater from China for only $60 and an enclosure for $15, you can pay $50 to have it delivered in 3 months when it arrives by ship or you can pay $120 to have it air freighted in the next couple of weeks, you can then assemble it and make sure everything works by yourself. In the event it doesn't work, you can always send it back and they will send you another one, you will just have to pay shipping both ways... they will do this as many times as you like. If there's a quality control issue, or product does not make muster, that is a loss on part of vevor when they accept your return and provide you a replacement. Not exceptional in English, although they seem to have some western marketing partners, as far as capitalism and consumerism goes, vevor Is more red, white, and blue than most of the brands westerners purchase from (at a premium)... all the while not realizing that all of these products are coming from the same place. When these products show up at home Depot, they call them husky, at Walmart they are great value, some people turn their nose up at harbor freight but harbor freight is just an older version of vevor. Quality can be a concern, there are quite a few videos out there for repairing/modifying/completing the assembly of harbor freight materials, typically the outcome is that such small adjustments still validate the lower cost of the item. Distributors like this start off with mail order / internet and then they move into brick and mortar where possible. When Central pneumatic and Chicago electric (harbor freight in house brands) develop enough of a following the brand will either get sold off and replaced with an identical twin or it will be kept as a legacy holding for its continued profit. I purchase tools that last, or meet a certain efficiency coefficient. I purchased a Bauer rotary drill / hammer for $150, The corresponding Hilti was $1,500. The three cubic feet melted away like butter, the divisive has successfully earned far more than $1,500 since largely by chipping out tub boxes during bathroom renovations. When it was just Ryobi and DeWalt, I had a hard time saying no to the fact that you could get two full Ryobi kits for the price of a partial DeWalt kit. I eventually succumbed to rigid, that color scheme is dynamic, although I have a few of their Sanders in my workshop and the chorded tools seem to work all right, the brushless drills that look outstanding have failed rather quickly. People give me rigid tools if they see one of mine come out as if I might have more use for it then they have, but I've got Ryobis that are nearly 25 years old and still work/I still use them routinely (The og batteries are toast). *-TLDR-* A tool (that costs the same or less as the service call wherein the tool is used) nearly pays itself off in its first usage. That meets an efficiency requirement. I've seen enough of vevor to place them at the top of my search list when looking for new tools/products. _Neither _*_Ryobi_*_ nor _*_vevor_*_ paid for this messaging._
I could see that was your 1st camera run when I saw you going down the washer box. I was like " *there's no way that's going through there* " 😆 ❤ your videos 📹 👍
Love your videos my guy! Having the camera is definitely a money maker for your company. My company just invested some skrillaz into the “Light Ray” lining machine. Top of the line. Uses UV light to cure the liner. The sleeves comes pre-resin. Literally only need two guys to operate and can do spot repairs in a few hours.
As a subscriber for quite a while I am blown away to see you don't have a half million subscribers already and I can't tell you how much I enjoy watching you work on these old old buildings with the rotten plumbing. You must be one of the most valuable person to call when the owners have a plumbing problem and they can relax knowing by supper time their problems will be over. I hope you age getting very rich because of your skills~!!
Great video. Very James Bond like system. The case with the big letters telling what it is, is hilarious. As though you need to be reminded. But for $500-$700 that is a steal. Unless it's a 30-day warranty. Cheers.
Yup you’re calling a guy like me I run a 9 million dollar sewer and drain rehabilitation Trenchless sewer repair company I got tired of regular plumbing too many people stealing our work and lowering prices of general plumbing I had to move into a field that people Couldn’t compete as much with us in
What kind of camera are you recording with? Im a plumber in Texas and been thinking bout recording some jobs. Thanks in advance, and keep up the good work.
Never buy a vevor camera unless you’re a plumber who doesn’t clean drains lol you need hdpe cables for strength and longevity also anyone trying to pass a 2” trap without a micro camera doesn’t know how to run a camera
I have the vevor machine 1/2 cable 100 ft it’s trash on mainlines I don’t always clear them I have the camera as well I sell it here and there not the best quality but it works
Vevor is ok, but a deal for the money. Rigid thinks they're selling gold. If you can write it off and have the cash get rigid or another top brand. But you can buy a lot of vevors for that kind of money. Make the money first, upgrade when you cay.
I just used your code to save 35 bucks on the 40 meter (131' ) camera. Wish is was self levelling, but for the price and my volume of work, sure hope it is the magic balance point. Thanks Broskie!! :)
Well for that price it’s non-HD, so you’re not getting quality lens or sensor probably. You need at least 720p. But I see what you’re saying, as this is not your bread and butter 😊
I think the line “is the first time” is not a good pitch because you’ve done the job without it lol but I’m sure it’s useful.. although I’ll give you a new business if you keep this item.. offer repairing or retrofitting these pipes with felt encrusted epoxy .. no damage no digging just send the camera estimate ur cost then clean it out with thst rotating tool so try the chains send the balloon with the felt pump the epoxy let it set and pull out the ballon and ban new rustproof harder than metal 50 year old pole
lol good job rabo peixe thank god you turned it into your own advertisement and not what they wrote for you to say 😂 but we all know you ain’t never gonna use that pos your to busy to pull out that thing and waste time on that when you coulda had 2 other jobs done already lmaooo lemme get atleast a thumbs up broski ri plumber here
Broski you sound like the f****** salesman of all the people that I thought would never commercialize. I guess that money and that free s*** changes everybody.
@roberthernandez1985 I haven't used a sewer machine since I was an apprentice back in the 90's... 30 master plumber who's finger ain't on the pulse of the drain cleaning community... my drains don't often need cleaning, and if they do (construction debris etc) we are calling someone else, 😆
Bought a spot welder and a well pump from them, both work absolutely perfectly and have had no issues. Spot welder is 2 years old and the pump has been in the well for 15 months. Absolutely no issues.
I have several pieces of vevor "tools" and equiptment....they're fine. They're cheaper, yes. 85% the quality, 30% the price 😂. I'm a plumber, and hvac tech. They get put through their paces
It's bad enough that He UA-cam grovels for you to subscribe for ad free viewing but allows content creators to become salesmen for products/services one really has no interest in purchasing!.....
@@Jesterpec666 new builds? Why are all his videos residential work then? Does he conveniently hide the construction videos? Why would a self owned business do construction? It makes zero sense. Y'all wanna just make a bunch of lame shit up.
@@serpentinefire921 roughing in a whole bathroom/kitchen/entire apartment is not residential service… renovating an animal hospital is not residential service… repairing a cooling tower is not residential. Half of the work the videos this guy posts are literally new construction
@@Kp-2 roughing in an entire bathroom, kitchen, apartment, house, isn't always construction, hence remodels, which are residential. Even if only half his videos are residential, that's still not a good enough reason to have never run a sewer camera. You're arguing just to argue, rather than trying to get the truth of the matter. Which is pretty fuckin fem.
*The screen cover is actually a shade. It creates a shaded area around the screen, that's what the velcro is for.*
Yup good cheap lil cameras
@@JUNEBUGLLCyeah but you need the shade when you’re outside in the sun. Doesn’t matter how much the camera costs, you can’t see screens well in the sun.
Im not a pro plumber. I used to do it during an apprenticeship but ended up taking a different route. Still do all my own stuff. When my GF's drains stopped draining (after she'd already paid a local contractor $400 to clear it and they didnt even scope the pipes) I cleared the blockage with my drain cable but wanted to see what was in there. I picked up a vevor 165 foot scope because im not going to be using it all the time (again, dont do this professionally) and couldnt justify the cost of a see-snake. But $500 for a camera was priced right. Worked swell, gave me good indication of how far in from the clean out the obstruction was, I could see everything with clear quality. I cant speak for durability but given how often I'll use it for my place and my rentals (should i need to), I expect it'll do. Cheap battery will probably fail from not being used consistently if i was to make a prediction for what kills it. But if you're small-time or something its worth a shot and will probably more than pay for itself before it fails.
Clearing stoppages is not always fun but you can certainly bet on it being a profitable part of plumbing along with the sewer camera and locator.
I own a sewer line excavation company here in CO. We got the equipment, licenses, people, and systems. Very profitable.
Good lord, vevor makes everything.
Ain't that the truth~!!! Lowe's gets all their plumbing stuff from them too~!
I want to thank you for posting your videos. It is a great help to people like me who are trying to learn as much as they can. I know it creates a hassle for you to have to think about taping your work, camera positions, and then going back and narrating the videos, and I want to thank you for your sacrifice in time in doing so.
Looks like just the affordable alternative to the $12,000 ridgid camera snake setup i have been looking for, going to try and get my boss to buy this for our company.
I use them all the time never had an issues either except when we lent someone a camera it came back in pieces
Even if this is sponsored. I’m happy this video came to be I’ve been looking at buying a camera and this has convinced me to do it.
Vevor is doing a big push to send equipment to smaller UA-cam/Instagram channels I’ve been seeing a lot of it lately and of course they are getting this stuff for free so it’s in the channels best interest to talk best about it. Not saying our broski would stoop to that level but other accounts I can’t speak for. Lots of diesel heaters…
They're good cheap little cameras
Nobody specifically ordered this up, we might call this a rant to follow:
Businesses do well to send equipment to various influencers who have audiences of specific sizes and demographic.
***
I heard him talk about what he liked and what he didn't like, doesn't sound like a shill.
He didn't say he wouldn't accept a more expensive one from a different brand, he didn't say it's all he will over use and he didn't say if he currently uses different products.
He highlighted features that would have been written on the packaging, although these products do come with media kits sometimes and they do have features that they encourage you to stress. Ethically these features are still what is marked on the packaging.
We saw him unbox and we saw him inspect/used the product. Based on this experience alone, I hope vevor felt enough friction to throw those batteries into the locator wand.
His focal point was the price, the general function of the tool, and that the price was equivalent to one service call using a similar tool.
***
At three different times I found myself purchasing something from vevor because it was the quickest delivery at the lowest price.
One of those was a diesel heater btw. Such heaters are staples in semi trucks and RVs and while I understand I've seen a few vevor diesel heater videos recently, they all come from the same place, are made the same way, with few differences no matter who is selling them... Even espar/eberspacher.
I bought the 8KW Vevor Diesel heater because it was in a portable enclosure and cost less than the last one, I purchased it for an RV plain Jane, by nearly $70.
Application was in a sizable bell tent for winter camping up north.
It did the job by the way.
Vevor doesn't make these things, they market and sell these products, function QC and customer service / support (this is where they provide the most benefit) exactly the same way Walmart does when they buy similar things from China or other global vendors.
You too can buy a diesel heater from China for only $60 and an enclosure for $15, you can pay $50 to have it delivered in 3 months when it arrives by ship or you can pay $120 to have it air freighted in the next couple of weeks, you can then assemble it and make sure everything works by yourself.
In the event it doesn't work, you can always send it back and they will send you another one, you will just have to pay shipping both ways... they will do this as many times as you like.
If there's a quality control issue, or product does not make muster, that is a loss on part of vevor when they accept your return and provide you a replacement.
Not exceptional in English, although they seem to have some western marketing partners, as far as capitalism and consumerism goes, vevor Is more red, white, and blue than most of the brands westerners purchase from (at a premium)... all the while not realizing that all of these products are coming from the same place.
When these products show up at home Depot, they call them husky, at Walmart they are great value, some people turn their nose up at harbor freight but harbor freight is just an older version of vevor.
Quality can be a concern, there are quite a few videos out there for repairing/modifying/completing the assembly of harbor freight materials, typically the outcome is that such small adjustments still validate the lower cost of the item.
Distributors like this start off with mail order / internet and then they move into brick and mortar where possible.
When Central pneumatic and Chicago electric (harbor freight in house brands) develop enough of a following the brand will either get sold off and replaced with an identical twin or it will be kept as a legacy holding for its continued profit.
I purchase tools that last, or meet a certain efficiency coefficient.
I purchased a Bauer rotary drill / hammer for $150, The corresponding Hilti was $1,500.
The three cubic feet melted away like butter, the divisive has successfully earned far more than $1,500 since largely by chipping out tub boxes during bathroom renovations.
When it was just Ryobi and DeWalt, I had a hard time saying no to the fact that you could get two full Ryobi kits for the price of a partial DeWalt kit.
I eventually succumbed to rigid, that color scheme is dynamic, although I have a few of their Sanders in my workshop and the chorded tools seem to work all right, the brushless drills that look outstanding have failed rather quickly.
People give me rigid tools if they see one of mine come out as if I might have more use for it then they have, but I've got Ryobis that are nearly 25 years old and still work/I still use them routinely (The og batteries are toast).
*-TLDR-*
A tool (that costs the same or less as the service call wherein the tool is used) nearly pays itself off in its first usage. That meets an efficiency requirement.
I've seen enough of vevor to place them at the top of my search list when looking for new tools/products.
_Neither _*_Ryobi_*_ nor _*_vevor_*_ paid for this messaging._
@@mr.hannibal2072 sure mr vevor you just added 15 paragraphs to what I originally said
I could see that was your 1st camera run when I saw you going down the washer box. I was like " *there's no way that's going through there* " 😆
❤ your videos 📹 👍
Not with a vevor fiberglass rod cable lol my camtronics micro camera can pass a 2” trap all day and even 1 1/2” pvc traps
You need start doing ebooks or voiceovers. You have a golden voice. I dont think you realize how much bread those pipes can possibly be making you
You are the master of the hoses clamps broski
Love your videos my guy! Having the camera is definitely a money maker for your company. My company just invested some skrillaz into the “Light Ray” lining machine. Top of the line. Uses UV light to cure the liner. The sleeves comes pre-resin. Literally only need two guys to operate and can do spot repairs in a few hours.
"a money maker" no it's literally a requirement.
Thanks. I always wondered about those cameras but didn't know anyone that has one
$700? Thats a steal wtf
Hey boss I just wanna say I appreciate what you do.
I’ve learned alot watching your channel Nevada is watching!
I really enjoy these SelloutNYC episodes.
You can tell bro was reading right off a script
Milwaukees backpack camera is fye asf i got that one at work and the locator to go with it. About 15k set up
cute box , how do you clean it from all pipe residue over time?
As a subscriber for quite a while I am blown away to see you don't have a half million subscribers already and I can't tell you how much I enjoy watching you work on these old old buildings with the rotten plumbing. You must be one of the most valuable person to call when the owners have a plumbing problem and they can relax knowing by supper time their problems will be over. I hope you age getting very rich because of your skills~!!
I feel your pain brother. People don’t know the struggle
This company has some insane value for your money i was expecting this thing to be like $3000 lol they got some for like $90 too 😮😮😮
0:20🇺🇲Hawaii🤙
Thanks for doing an honest and fair review, your the only youtube plumber i can honestly say does legit work 100% of the time
You can also perform a home colonoscopy with it too!
Great video. Very James Bond like system. The case with the big letters telling what it is, is hilarious. As though you need to be reminded. But for $500-$700 that is a steal. Unless it's a 30-day warranty. Cheers.
Yup you’re calling a guy like me I run a 9 million dollar sewer and drain rehabilitation Trenchless sewer repair company I got tired of regular plumbing too many people stealing our work and lowering prices of general plumbing I had to move into a field that people
Couldn’t compete as much with us in
Merry Christmas Mr. Hydro!
Bro-ski and bro-skets!
I love that line!
As do I~!!!!
Get a bit of Velcro tape. That will fix your flap issue. Good review.
My friend just put a strip of velcro on the back & adjust to right below the case. That should hold the flap back. 👊😎
Great job bro! 😎👍
What kind of camera are you recording with? Im a plumber in Texas and been thinking bout recording some jobs. Thanks in advance, and keep up the good work.
Get that merch broski!!!!
Never buy a vevor camera unless you’re a plumber who doesn’t clean drains lol you need hdpe cables for strength and longevity also anyone trying to pass a 2” trap without a micro camera doesn’t know how to run a camera
The Price Drop from $700 to $500, with an Account, really goes to show that your Data/Information is worth a lot more than only $200.
I have the vevor machine 1/2 cable 100 ft it’s trash on mainlines I don’t always clear them I have the camera as well I sell it here and there not the best quality but it works
I sure hope HydroNYC comes back. 2024 will be bleak without our broski.
My issue is, is this camera great for marking depths up to 5-10ft. Is the sonde strong enough for a rigid locator.
Badass video Broski. Keep up the amazing work. 💪
Ahh yah the “sun blocker” always flapping down on your screen
Why don’t they add measurement lines on the camera line it would sale it self
Can you review the vevor pro press please?
Vevor is ok, but a deal for the money. Rigid thinks they're selling gold. If you can write it off and have the cash get rigid or another top brand. But you can buy a lot of vevors for that kind of money. Make the money first, upgrade when you cay.
Hi how are you?. Just joined your channel. Question for you… is it bad to put coffee grounds down any sink??. Should I stop doing that??.
Is cast iron pipe this common or is it just a NYC thing?
I have only seen PVC for so long.
Brosky, you're on your own? I'm a property owner in NYC who's been following along with you. What are your details to hire you?
vevor is a chinese company making budget goods. Surprised its being used in hash tags like it's a brand name.
I think I would enjoy working with you 😅
Rad. I feel like there should be a version that simply attaches to a smartphone.
for sure
I just used your code to save 35 bucks on the 40 meter (131' ) camera. Wish is was self levelling, but for the price and my volume of work, sure hope it is the magic balance point. Thanks Broskie!! :)
Well for that price it’s non-HD, so you’re not getting quality lens or sensor probably. You need at least 720p. But I see what you’re saying, as this is not your bread and butter 😊
That uses solenoids instead of valves?
This guy doesn't exist. He is just an AI voiceover. Change my mind lol
Just kidding HydroNYC :) How come we never see you in your videos?
Wish I recorded my job today. 20 year old industrial glove cleaning machine
I wonder if a proctologist uses equipment from vevor
Sounds like a paid promotion
Now broski can give prostate exams on the low for some extra coin.
I’m just came across this channel.. I’m inspired to see what I could become!!!!!
Not enough swearing in this vid.
I think the line “is the first time” is not a good pitch because you’ve done the job without it lol but I’m sure it’s useful.. although I’ll give you a new business if you keep this item.. offer repairing or retrofitting these pipes with felt encrusted epoxy .. no damage no digging just send the camera estimate ur cost then clean it out with thst rotating tool so try the chains send the balloon with the felt pump the epoxy let it set and pull out the ballon and ban new rustproof harder than metal 50 year old pole
We do it all day everyday and we use ultraviolet epoxy
I got the HBUDS Sewer Camera, the yellow cable cousin to this one 😂$400 bt
480p screen? 5 speed you the 2005 model then? 😅
lol good job rabo peixe thank god you turned it into your own advertisement and not what they wrote for you to say 😂 but we all know you ain’t never gonna use that pos your to busy to pull out that thing and waste time on that when you coulda had 2 other jobs done already lmaooo lemme get atleast a thumbs up broski ri plumber here
Can’t get through the P-trap!? C’on why would you even recommended it?
Tell them I want one too
Those corner studs don't seem to be supported very well.
are you half portuguese?
Vevor is like an industrial version of wish isn't it?
Yea. Bro is selling out. But when they paying 10k for an advert why not.
If it can't make it past a p-trap than I dont need it.
Broski you sound like the f****** salesman of all the people that I thought would never commercialize. I guess that money and that free s*** changes everybody.
Sewer endoscopy😂
The camera is great but the locator absolutely sucks
As far as i know there isnt a drain camera that will pass less than a 3" trap.
Ridgid Micro and Nano reel will
Camtronics cam will you need to be a pro doggie it’s secrets of the trade
@roberthernandez1985 I haven't used a sewer machine since I was an apprentice back in the 90's... 30 master plumber who's finger ain't on the pulse of the drain cleaning community... my drains don't often need cleaning, and if they do (construction debris etc) we are calling someone else, 😆
New videos? 😢
It couldn't make it past the trap? Video should have stopped there 😂
That camera head is way too big.
New content?
Vevor is of questionable quality. Free gifts should not be a part of any product review.
Bought a spot welder and a well pump from them, both work absolutely perfectly and have had no issues. Spot welder is 2 years old and the pump has been in the well for 15 months. Absolutely no issues.
I have several pieces of vevor "tools" and equiptment....they're fine. They're cheaper, yes. 85% the quality, 30% the price 😂. I'm a plumber, and hvac tech. They get put through their paces
I agree 100%
Usually everything being reviewed is a gift as part of a sponsorship contract 🤡
Free gifts are how most product reviews come about. It’s whether the reviewer gives an honest review.
i broken the lens within ten times use....no replacement head
You're definitely not from new york.
That case is gonna get stinky
I bought one of those they’re absolute garbage rigid is the way to go
I also have a dislike for drain cleaning because it's just kinda gross 💩
It's bad enough that He UA-cam grovels for you to subscribe for ad free viewing but allows content creators to become salesmen for products/services one really has no interest in purchasing!.....
Walk away
Don promos
first!
Don't give a shit about your commercials!
Cough.... Sell out
Trash. Rigid camera all day
Bro, I might as well buy me a sewer camera myself instead of hiring you for four to $500
"BLOCKED DRAIN."
Your freaking VOIZE IZ ANOYIIIINGGGG
Owning a business without ever having camera'd a line is a HUGE red flag as a homeowner. You're clearly not what you seem
He does more new construction than service. He does very good work but service plumbing is a different industry
@@Kp-2 EVERY video is residential service. Why are you lying?
@@Jesterpec666 new builds? Why are all his videos residential work then? Does he conveniently hide the construction videos? Why would a self owned business do construction? It makes zero sense. Y'all wanna just make a bunch of lame shit up.
@@serpentinefire921 roughing in a whole bathroom/kitchen/entire apartment is not residential service… renovating an animal hospital is not residential service… repairing a cooling tower is not residential. Half of the work the videos this guy posts are literally new construction
@@Kp-2 roughing in an entire bathroom, kitchen, apartment, house, isn't always construction, hence remodels, which are residential. Even if only half his videos are residential, that's still not a good enough reason to have never run a sewer camera. You're arguing just to argue, rather than trying to get the truth of the matter. Which is pretty fuckin fem.
Only 10k 😂😂😂
Can't believe you're new to this instrument... catch up Brosky! 😂🎉❤
But you're making youtube cash so... I need to catch up too! Love from Chicago and the lead pipe fiasco!