spray the back part of the vinyl- so the part that lays on the garment. the adhesive will help keep the material stuck flat to the garment while the embroidery takes place.
Hi Alejandra, while using a household iron can be a viable alternative to a heat press for small-scale or occasional projects, keep in mind that heat presses are designed specifically for heat transfer applications and offer more consistent heat and pressure control, which can result in better quality and durability of the finished product.
I've got a vinyl pattern already stuck to a costume sleeve but I'd like it to look embroided. Is it possible to just stitch into the vinyl on the sleeve and it'll keep it's shape? Do I stitch around the pattern directly into the fabric or straight into the vinyl? I'm a complete noob with fabrics! Any guidance would be great!
It is possible to create a design in the exact same dimensions as your vinyl but you would have to line up the embroidery design to the vinyl perfectly on the machine when you trace it, and make sure the material is hooped exactly in the middle of the hoop so it can automatically center itself in the hoop. It's a bit risky though because you'll have to eyeball it. What you can do is trace it carefully and create a basting stitch as the first color stop in your design to see exactly where the stitches will line up with the vinyl. The basting stitch is designed to come right off when you pull it with your hands so if it lands in the wrong spot, you can keep pulling it out and trying again until it lines up. Keep trying until it lines up perfectly. In other words, it's possible but you'll have to be very careful and trace your design accurately. Also make sure your satin stitch border is wide to allow room for error.
@@ricomatv thanks for the reply and info. It sounds a bit beyond me to be honest. So to answer my question stitching into the already stuck down vinyl won't work out well?
I am using the glittler vinyl on my embroidery but i find the adhesive gets stuck on to the needle and end up causing thread break. Can you advise what is the best needle to use?
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Hi there! Our Em-1010 is great for beginners. It's our smallest model and has 10 needles. With our financing options it also starts at only $130 a month. If you'd like to learn more you can fill out the form at this link -> Ricoma.com/us/contact-us
Hello for this project all you need is the DST file and the special vinyl that was shown in the video. After the machine is done embroidering you just rip away the vinyl.
It's better with a heat press because you can control the among of heat and time, but if you don't have it don't worry you can use an iron. In my experience I put the temperature of the iron on synthetics and put a cloth or the paper on it or just the protective plastic of the vinyl and iron it without move in it for about 50 to 70 secs
You could also use whit or silver glitter vinyl to make sublimation on materials that aren’t polyester
Hi Tyeshia! Thank you for the suggestion, we appreciate it.
I love this
We appreciate the compliment!
Very clear tutorial thank you pretty lady!
You are so welcome! Make sure to like and subscribe to our channel
Thank you 😊
Well done! As always 👍🏻
👍👍👍! Super Tipp. Danke Dir. (für den Flock reicht auch einfaches Bügeleisen, 10-15 Sekunden und gut ist :) )
Thank you!
Good!I'll try it next time.What spay do u use between vinyl and garment?
We used a spray adhesive called Tempo Spray.
when you pulled the backing off the glitter vinyl, did you spray the adhesive to the peeled off side or does it matter?
spray the back part of the vinyl- so the part that lays on the garment. the adhesive will help keep the material stuck flat to the garment while the embroidery takes place.
thanx for sharing , I have a question what is the best gold thread (no breaks no headache that you use)
Hey there. We like yenmet metallic thread
Can I use any htv for applique? Many embroiderers suggest marine vinyl but was wondering if I could just use regular htv?
Yes, you can. Check out this video for more info: ua-cam.com/video/Wswr8SMav-g/v-deo.html
Do you have to use glitter vinyl or can you use just regular heat transfer vinyl
Regular should work just fine.
If I don’t have a heat press can I use a normal iron??
Hi Alejandra, while using a household iron can be a viable alternative to a heat press for small-scale or occasional projects, keep in mind that heat presses are designed specifically for heat transfer applications and offer more consistent heat and pressure control, which can result in better quality and durability of the finished product.
Is there way to use this for a whoke design for a key fob? Or not?
my vinyl warps when I press it. is it cause I didn't use the spray to hold it down
For help with this issue, please contact support! ricoma.com/US/tech-support
So I have to get a app to be able to use vinyl
Hi, no you don't need an app to be able to use vinyl.
I've got a vinyl pattern already stuck to a costume sleeve but I'd like it to look embroided. Is it possible to just stitch into the vinyl on the sleeve and it'll keep it's shape? Do I stitch around the pattern directly into the fabric or straight into the vinyl? I'm a complete noob with fabrics! Any guidance would be great!
It is possible to create a design in the exact same dimensions as your vinyl but you would have to line up the embroidery design to the vinyl perfectly on the machine when you trace it, and make sure the material is hooped exactly in the middle of the hoop so it can automatically center itself in the hoop. It's a bit risky though because you'll have to eyeball it. What you can do is trace it carefully and create a basting stitch as the first color stop in your design to see exactly where the stitches will line up with the vinyl. The basting stitch is designed to come right off when you pull it with your hands so if it lands in the wrong spot, you can keep pulling it out and trying again until it lines up. Keep trying until it lines up perfectly. In other words, it's possible but you'll have to be very careful and trace your design accurately. Also make sure your satin stitch border is wide to allow room for error.
@@ricomatv thanks for the reply and info. It sounds a bit beyond me to be honest. So to answer my question stitching into the already stuck down vinyl won't work out well?
I'm going to attempt this and create a video. Stay tuned!
Can you send me the vinyl pattern so I can try it out? Or show me a picture! laura@ricoma.com
@@ricomatv sent it a few days ago :)
I am using the glittler vinyl on my embroidery but i find the adhesive gets stuck on to the needle and end up causing thread break. Can you advise what is the best needle to use?
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
were can I buy the films shown in the uk please
What kind of embroidery machine do you recommend for a real beginner ?
Hi there! Our Em-1010 is great for beginners. It's our smallest model and has 10 needles. With our financing options it also starts at only $130 a month. If you'd like to learn more you can fill out the form at this link -> Ricoma.com/us/contact-us
Did you use 80/12 needle?
and what was that spray you used to stick it down?
Temporary adhesive spray. You can find it in craft stores.
what do they mean when they say it's a cut file .can I buy it and embroidered it or do I need a cutting machine???
Hello for this project all you need is the DST file and the special vinyl that was shown in the video. After the machine is done embroidering you just rip away the vinyl.
Has anybody used the siser glitter for this
can i use an iron or do i need a heat press
It's better with a heat press because you can control the among of heat and time, but if you don't have it don't worry you can use an iron.
In my experience I put the temperature of the iron on synthetics and put a cloth or the paper on it or just the protective plastic of the vinyl and iron it without move in it for about 50 to 70 secs
Where can I order that vinyl?
Stahl's!
Where can i buy the embroidery vinyl?
We purchased it at Joann Fabrics!