How To Build A Twin Brushed Motor RC Airplane. DIY Remote Control Plane
Вставка
- Опубліковано 7 лют 2025
- 2 x DC 180 Motors. How to make twin motor RC Airplane at home.
Flight performance is very good. A model aircraft with very stable landing and take-off.
You Need:
20A ESC s.click.aliexp...
4 x 9gr Micro servos: s.click.aliexp...
2S 7.4V 800Mah LiPo Battery www.banggood.c...
4 - 6 Channels Radio Control www.banggood.c...
LiPo Battery Balance Charger: www.banggood.c...
OR
www.banggood.c...
Hot melt Glue Gun: s.click.aliexp...
Pushrods:
www.banggood.c...
2mm Rod For Landing Gear:
www.banggood.c...
Canopy Hatch Lock link:
www.banggood.c...
Servo control horn:
www.banggood.c...
Adjustable Linkage stopper (Easy Link): www.banggood.c...
Gold Connectors 3.5mm (Motor & ESC connections):
www.banggood.c...
30mm Wheel: www.banggood.c...
Wheel stopper: www.banggood.c...
Y extension cable: www.banggood.c...
DC 180 Motors : s.click.aliexp...
108mm Propellers (CW&CCW): s.click.aliexp...
Kraft foam board (50x70 plate)
amzn.to/2oE2vOK
Mini Bench Vice Clamp: www.banggood.c...
Diagrams : bit.ly/38i65zq
Approximate flight weight: 410 gr
CG: 33-37mm back from the leading edge of the wing, measured at side fusulage
All of my videos: bit.ly/2Z9QVYK
Thanks For Watching And Please don't Forget To Like, Share & Subscribe For More Awesome Videos.
KendinYap Channel / @kendin-yap
şu zamana kadar yaptığın en iyi si açık ara bu
1_çok stabil
2_çok fazla lift üretiyor (kısa mesafeden çok rahat havalanabiliyor)
3_indirirken hiç yalpalamadı
başaraılarının devamını dilerim
you stunning the model plane world by simple building technology.we respect your hard workmanship.cheers brother.
、
Gayet başarılı uçuyor kontrolünüzde harika tebrikler
Best creation ever I seen on UA-cam.. Good job bro.., 💐💐💐💐💐
Amazing !! I love this model 👍
Never boring to watch your video.
Good bro and keep it up! I was trying to find a brushed motor plane and you do that. Thank you turkey man support from bangladesh 🇧🇩 🇹🇷
Bravo ☺️👏 l'ingénieur 👍🇩🇿
ilk yorum gayet güzel olmuş
Who is from india 🇮🇳🇮🇳🇮🇳🇮🇳🙏
This guy is so cool in making these rc planes I like it😊😊😀😁
Abi saol RC uçaklar daki pahalı motor anlayışını kırdığın için çok teşekkür
The best way you explained... I will rate you No. 1
Amazing what was going on there. Great video.
Only one thing that I miss to do the same : time 😩
Great job !
5 years latter, you still have not got any time for yourself? Maybe 2025 you could give it a try. Life is too short.. and we have only one.
Wow, It looks better even than the ones in the industry
İşinizi layığı ile yapmaya devam edin . Başarılar.
your works are soo fresh , thanks for sharing this with us
Harika bir video olmuş
Eline sağlık abi bende teknofest iha yarışmacısıyım ilk uçağımı seninkinden esinlenerek yapmıştım
It is very nice model.l built it and it works great.Thanks for sharing it with me
💐💐💐👍👍👍😊☺️☺️☺️
From where did you buy the material.. and what was your budget in INR
Please reply as soon as you see it sir. As i am eager to build it.
Hands Up buy it on amazon buy 4 9gram servos buy a esc and brushless engine buy a radio and receiver will all cost you around 120
What a brilliant design and such a well made plane, well done my friend. Many thanks for sharing this with us all on here. You are a very gifted modeller and a great video maker. I love these build videos and I shall watch this one again and try to make this plane too.
Many thanks and have a Merry Christmas and a very Happy New Year!!
Joe
Thank You. Happy New Year to you
@@Kendin-Yap Happy new year brother
@@Kendin-Yap merhaba videolarını takip ediyorum çok başarılı sorularada cvp verdiğin için çok teşekkür ederim 2,4 rc kumandadan gps ile takip yapabilirmisiniz
Would you recommend this to a absolute beginner in making rc planes ?
This is a stable and slow flying model. So beginners can use it for training.
@@Kendin-Yap Thx you are still replying to comments after 3 years.
Legend
@@Kendin-Yap please answer my question too
Bizim insanımızdan da bu tür çalışmaalrın yapıldığını görmek çok güzel.
Such A Cool Video! Keep It Up. :0
You are just amazing
Thanks for sharing DIY videos I likw them so much !! please go ahead and make more :)
ما شاء الله ما شاء الله ما شاء الله يعطيك العافيه
Great idea
Beautiful job, dude! Really well done! 😃
Very nice job
Çok hayran kaldım elinize sağlık :)
Harika bir video olmuş elinize sağlık.
Nice ❤👍
As usual
Çok uçaklar La aranız var farkettim ama keseke pilot olsaydın sen harikasın ve videolarında!!!🤔🤔🤔🤔🤔🤔🤔🤔🤔
I got surprised with your new video
Wow.amazing aplane
Eline sağlık abi
Hi does it consume so much battery compare to single low rpm motor?
Nice
I like you video
Video : I love you too 😂
Thanks
Can you make a video about how to use a rc transmitter and receiver modules as they don't have connecter so I want to know to solder them with servos and esc
And can't we just solder the brushed more with esc???
I think its good to be a training aircraft for anyone who wants to become a Professional Drone Operator someday I hope I can get and make that DIY Twin Motor Aircraft I reallg like that but Bro I have only one I notice you did not put a camera on that amazing DIY Aircraft like in th previous Single Motor DIY Aircraft
stunning.your making and flying skills are amazing.thank you.
Thank You
Very nice skills. I've already subscribed for more videos.
Abi sen nasıl bir kralsın ya, cideen senin yaptığın projeleri çok yakından takip ediyorum abi ama gönlümüz seni hep yarışlarda görmek isterdi, teknofestte falan mesela, kesinlikle 1.cilik getirirsin sen abi bu uçaklarla
Very nice
The latest development and modifications to the wing design gave the flight much more stability and balance. Excellent ideas and work.. Keep moving forward.. Cheers!
I would like to ask if a 6.5 v motor will work with a
RPM of 22200?
Does the plane automatically balances itself while not tilting or going up/down ?
No, it does not have autonomous flight support. It is completely manually controlled.
Dude i love this plane, can you please give wiring diagram for the twin motor or even better for the entire setup, thank you.
The schematic link is already available below the video.
Click "more" or "show more"
Güzel elinize sağlık...
Very good build. But 1 Amp BEC can't handle 4 servo. It can barely handle 3 servo I believe.
Max. current 200-250ma for this servo. No problem for 4 servos.
@@Kendin-Yap That means this servos are analoge servo. Right? Because digital servos are power hungry. They take 400-500mA per each 9g servo.
Yes, these are analog servos. In addition, aircraft with this type of sport scale flight style never need to draw maximum current of all servos at the same time. This is not a 3D aerobatic model.
Great dear .........how many meter can fly
TEBRIKLER USTA
Good
Can we place there a brushless motor
Yes you can. Like 1306 brushless motor and 6A brusless ESC
Thanks for your reply
I am going to make a mini project like bicopter.
Everything is ready but for two servo motors can we rotate them in one direction for one channel and rotate the same two servo motors rotate in different directions. pls reply. This is my project and it going to end in next week
And one more thing, that 1306 motor is too high price for me. But can you prefer me a better motor for my bicopter
@@PoovarasanKEEE Digital remote control transmitters have a "program mix" feature in their menus. You can search for videos related to Program Mix.
молодес не останавите
Hey i am unable to get DC motor , so can I attach brushless 1 Kv in parallel
As in some videos I saw one motor sometimes doesn’t work . Pls reply I need to build it now
Brushless motors are different. It does not work properly with a single ESC. (There are exceptions)
Oh , thanks a lot , I was about to buy 2 motors and 1 ESC only . I had one more doubt that no trim joystick is not available and the x y axis joystick is available to me , so should I see your other Arduino controller with Nrf module with antenna just to increase its captivity , also do we need to program the antenna as well , SRY IF I ASKED SOMETHING WRONG AS IT IS MY FIRST BUILT . PLS REPLY I NEED TO PLACE ORDER FOR THE THINGS , thx
If I use a LiPo with 1000 mah, 11.1v with 3S will be overpowered? Or can be added?
11.1V is not suitable for these motors. Motors will fail.
KendinYap
Thank you admin 🌟
Normalde de rc-elektironik ile uğraşan biriyim son zamanlarda videolarınız sayesinde rc uçağa da merak sardım ama şimdilik bir kumanda ve alıcı gibi yüksek bütçeli şeyler almak istemiyorum.
Kumanda ve alıcıyı kendim arduino ve nrf modülü ile yapmaya karar verdim. Herhangi bir öneriniz varsa bekliyorum
Peki bunlarin amperleri yuksek olani alsak ucak bozulur mu yone batarya 2s 7.4 v olacak sadece amperi yuksek olacak yanit bekliyorum
Mah değerini rasgele yükseltemezsin. Çünkü pilin ağırlığı artar. Ve uçak ağırlık yüzünden uçamaz.
Peki tşk
Bide abi yükseltsek sorun olur mu
Yani motorlar bozulur mu
Abi proje çok güzel olmuş ben bunu Arduino ile yapacam diğer projeye baktım ama bu daha güzel
god new vidios
Great
the particular dc 180 motors not available online....please can we use some other motors?
You can use brushless 1306 motor.
@@Kendin-Yap Hi, can't find 1306 too in India.....can you please give a few more options. I have managed to purchase most of the other items.Thanks.
How long does the battery last? Can I use a stronger battery?
The higher capacity battery is heavy. So it would not be appropriate. Approximate flight time is 4-6 minutes.
ELİNE SAGLIK GÜZELDİ ( BU SEKİLDE YAPILIP DEGELİ UCMASI COK SARSIRTIYOR BENİ )
What is the lipo battery connections
Hi , why is important to fit ceramic capacitor to the motor.Thanks
The coils of brushed motors cause electrical noise. Capacitors act as filters. In this way, the circuit to which the motor is connected is not affected negatively.
Thank you is good to know
Can I solder the motor with the esc
Yes you can
Can i substitute 180 motors with N50 motors (40k rpm)?
Abi kumandalar çok pahalı bir videonda kumanda yapımını anlatsana bizde yapaşım
ua-cam.com/video/pjBnFZGfsjI/v-deo.html&start_radio=1&t=6
Fly sky ın kumanda ve alıcısıyla bir tank yapım videosu bekliyorum başarıların devamını dilerim seviliyorsun ♥
Teşekkürler. Tank videosu daha önceden yapmıştım. ua-cam.com/video/Ubzg0CBbsv0/v-deo.html
Hiw much dose it fly ... sir
abi ikinci el kumandan varsa ayarlıyabilirmisi video on numara olmuş
Gr8 build
Yaptığın uçaklardan birine kamera taksan bir de yukardan izlesek ne güzel olur
Bu videomdaki uçakta kullanmıştım. ua-cam.com/video/PdrjVSdA7_w/v-deo.html
I love your videos and keep up the good work, also can you do an rc Cessna 172 please :)
Dc 180 motoru hiç bir yerde bulamadım önereceğiniz başka bir alternatif var mı?
AliExpress de buldummm🎉🎊
Şu sıralar biraz zor bulunuyor. DC 180 motorun farklı versiyonları var. yaklaşık 30watt gücünde olan versiyonu olmalı.
How rc plane weight?
Battery back up???
Can you do a video on adding lights to a plane?
I plan to build a plane with lights in the future.
Abi o motorlar, taktığın proplarla yükteyken kaç Amper çekiyo
Maksimum devirde 4.5-5 Amper
Can we use 2200kv motor with 1045 propeller to this plane
No you can't.
Why sir
Ihalar üzerinde çalışmayı hic düşündünüz mü?
Uçuş ağırlığı olarak vrilen 410 gr yapının tüm ağırlığı mı oksa kaldırabileceği ağırlık mıdır?
Uçuş ağırlığı olarak belirtilen değer mevcut yapının uçabilmesi için gerekli donanımları ile birlikteki ağırlığıdır. Ektsra yük taşıma kapsitesi değil. Model uçaklarda hazır olsun el yapımı olsun bu şekilde ifade edilir.
Vay be kanal baya büyümüş ben abone olduğumda 5 bin falandı
How much cm is the propeller?
108mm
Links to all the Materials are in the description box below the video.
Press the arrow symbol on the right below the video. (For mobile)
Click the "More Information" link below the video. (For PC)
@@Kendin-Yap thank you
Can we use 7.4v 1100mah battery
Very little heavy, but you can use
But great job
abi videolar harika, müzikler i bilemedim nerden buluyun abi :))
Abi bence fotoblok değilde 3d printerden yapın bir uçak
Looks like a Douglas A-26 Invader head-on.
Bu şekilde uçuş kaç dk sürdü?
Birde alıcıya gücü nereden sağladınız. O gaz kanalı diye belirttiğiniz kanaldan alıcıya güçde sağlanıyormu?
ESC nin BEC (Regülatör) çıkış alıcıyı ve servoları besler. Uçuş süresini etkileyen çok faktör vardır. Kabaca 4-8 dakika arası
@@Kendin-Yap anladım teşekkürler.
Çift motorlu rc helikopter söküp içindeki kumanda sistemi motorlar vs kullnip yapmayı düsünüuorum yön değiştirme olarak pervanelerin dönme hızındaki farktan yararlanmayı düsünüyorum sizce olurmu?
Mümkün ama motor devri ile uçağı yönlendirmek çok zordur ve kullanışlı değildir.
Reis bunlari yaopman kac gununu aliyor
Ortalama 5-6 gün
Hocam bi ara kumandayıda çekseniz nasıl uçurulduğunu anlatsanız çok güzel olur
en iyi pilot dahi olsa maalesef kimse video çekerek uçuş yapmayı anlatamaz veya öğretmez . bize katabilecekleri tek şey kumanda üzerindeki stick ve buttonların işlevleri
@@loftlax-tr ışte o işlevleri merak ediyorum anlatmak istediğim buydu
@@FatihSefa. hem ucuz hem de kaliteli bi modem olup herkesin kullandığı bi kumanda olan flysky i6 yı kullanıyor bu abi de . Yine you tube flysky i6 inceleme falan yazarak öğrenebilirsiniz
DC motora eklenen kapasitor sart mi?
Fırçalı motorlarda olmasında çok fayda var. Motor bobininin yarattığı paraziti filtreler.
@@Kendin-Yap Ön tekerlek servosunu hangi kanala bagladiniz?
Makee a video on this moter and give me details how it is made and copper
first??