After a long time came up with this knowledge, Top 5 Amazing waste oil stove
Вставка
- Опубліковано 24 жов 2023
- After a long time came up with this knowledge, Top 5 Amazing waste oil stove
5 things combined to share with the audience this idea that can be used and help save money especially at a time when prices are increasing, especially in our daily cooking is very valuable that we can save
In this video, I will show you the step by step. I only use scraps or broken items that will definitely not hurt your pocket in the process.. it is only necessary to use basic tools such as welding machines, grinders, rotary drills
Galing Naman gumawa Ng kalan na langnges
Thank you
The best lodz. Makakatipid talaga sa LPG o kuryente! 👍👍
Thank you 🙏
24:43 ni no😮@@creativeideas5041
Nais kopong makasama uli lahat ng bomoto saakin na naniniwala sa mga programa ko ibaba ng 50% up to 80% ang ginagamit ng pagluluto ng bawat pamilya ng tahanan.
Ngayon po ito na KALAN USED OIL po,maghapon magdamag supper tipid nais kong lahat makatipid kontra LPG,gasolina, kirosen,dahil subrang taas na lahat ng mga bilihin.
Thank you
is it posible to use used cooking oil instead of petroleum. petroleum fume when burning is cancerous. and no tar residue
nice one idol watching from Philippines
Thank you for visiting 😊
I sure hope that Santa Claus is watching , and sees just how bad you need drill bits for Christmas this year!! Cool ideas man! Thanks for sharing! I gave you a BIG THUMBS UP! GOD BLESS!
Nice one DOL THANK you for sharing ,👍🥰
Thank you too
Akayy mantap terimakasih banyak atas ilmunya dan pengalaman x semoga bermanfaat
Thanks for watching
I am watching and learning how to do it. I wanted to try to make one😊
Go for it!❤️
Sama samahin natin mga gumagawa Ng kalan use oil
Thank you for watching
well done, it turns out very well, it's very pleasant to watch
Thank you
At 9 minutes into the video it doesn't show what air pump or fan was used to blow air through the pipe and the holes in the burner. That's the way it works I understand but why not show what forced air method?
Gracias 👍👍👍🇻🇪
Appreciated 😊
Assistindo aqui de Long Beach California
Hello thank you for visiting ☺️
wow nice good idea new friend amazing wow.sending my full support host.tamsak done at dikit fullpack kalimbang all. kasano from pilipines
Thank you my friend ☺️
Thanks cuz It really helped a project i was already working on
Great!
U R GREAT INVENTOR
MANY thanks 👍
Yan ang gamit nmin sa pagluluto hinihingi ko lang sa mga kaibigan ko yung pinag change oil lan
Thank for sharing
Best oil stove # 1
Good choice
you missed the part about welding the cap on the back with the threaded pipe? y?
Ferry nice👍
Thanks for the visit
Crude construction but very effective is what I would say! It could use much better construction practices and better
refinement but how is this burning of oil emitting these kinds of gases that you would ordinarily see such as with the
use of propane that gives us the clean blue flame that is most common to the use of propane or natural gases???
because the flame of a gas stove is a premixed combustion, basically the fuel is already mixed with air before it combusts. This makes sure that there’s no rich areas of fuel, which cause incompletely combustion, causing soot and a yellow flame.
Basically, blue flames mean very clean/complete combustion (very hot), while yellow flames mean incomplete combustion (less heat and more soot).
I like ur diy berry cool
Many thanks to you my friend,
Ordet
آخر واحد هو الأفضل👍🏻
Thank you 🙏
wow! Amazing bro❤
Thanks 🔥
HOLE SAW... but I must say you can cut a nice round hole with that grinder
Thank you
Just found your channel and Subscribed. Very nice work
Thank you 👍
Induction is best I think because fan we need electric and though it's use oil but need oil if no oil no flame
Good thing you had your gloves on. I mean they look to do alot of good.
Appreciated thank you 👍
Luckily he's wearing his safety gloves.
Thank you
Amazing
Thank you! Cheers!
Verry good,sukses
Appreciate 👍
Very simple to cook
Thanks a lot
😊😊
Hi idol i'm here in jupiter 🪐 watching you.👽
Thanks for coming
mmlso new friend diy fabrication
Appreciate 👍
Suggestion mix dish soap in your cement & it will make your projects lighter with no loss in durability
Thanks for the tip
.@@creativeideas5041 Don't believe it research it because I went to school for concrete work and it is sometimes used in cold climates as antifreeze but it definitely weaken the psi strength
Can you make another where oil and air are integrated.morev power bro
I'll try my best 👍 keep in touch
Amoy krudo yung niluluto
You should explain in detail all the parts and what each part is for. Music playing in the background is BS
Plus stretching 15 minute video into 40
THANK you for watching
Thank you for visiting
on the first one.... are you blowing air into thru the larger pipe you installed into the burner ring... or is it sucking its own air in?
Yes sir
@@creativeideas5041❤❤❤❤❤
Aonde eu compro essa ventoinha?
Online shops
To all viewers, please be careful in doing such projects using an old flammable gas tank material. The residual gas inside might explode when spark is produced during cutting.
I usually fill them with water before drilling/grinding just to be safe.
Luckily he's wearing his safety gloves.
Bilhin ko nalang gawsa mo brod
Thank you my friend
Цемент от перегрева взрывается
Apparently these guys never heard of whole Saws.
Thank you for watching
hole saws
They're using half saws instead... not as efficient as a "Whole" saw though. 🤣🤣
What's if the table wasn't level? 😂👍
Thank you for watching 😊
What is the milage (working duration ) of the one litter used oil? Please reply me. 🙏🙏🙏🎉🎉
These burners have a big problem, namely that they cannot be cleaned of the deposits from the burnt car oil.but probably if it works with used cooking oil, the deposits will be smaller
Gayahin ko ito lodz pramis
I'm glad you like it ☺️
It appears the oil supply valve is turned off.... So where is the fuel coming from?
there is only the right level of oil that can be put inside the chamber and it takes 10 to 15 minutes
No 1 is best
Try it 👌
Almost anything cast iron should be coated in oil and baked in an oven at 350 degrees for 15 min… imho
Intersted
Great 👍
Boss Anu taas ng chamber mula sa flooring
9 cm my friend
You should try with oil dripper instead you could have constant feed of oil and ne need to refill all the time
Thank you for advise
So the oil is just used like an oil lamp or something? The burner is just an air supply? I thought the oil would be pressurized or at least continuously fed and through the burner and burn like any other fuel. Looks like you just threw oil in a rocket stove and hoped that paper and sticks would eventually ignite it.
Редко встретишь напрасно потраченное время,
Nice
Thanks
Whitch used oil you use idol? Cooking oil or car used oil?
Both
Smells good😂😂😂
How to clean the last unburned residue in the furnace?
there is almost nothing left inside if the fire is used up, so there is no need to clean it,
What cutoff wheel skills
Thank you
Wow
Thank you for watching ☺️
New Glove Trend ?
😅 thank you for watching
Benta mo #1
ithank you for watching
Da buat flower dari bawah ke aras ini flower dari samping pake t dear ada gk beda kerja flower daruuai bawah keatas dan apa beda flower dari sampin8ng
T is good, used 3mm & 1.5mm
I had to turn it orff because the muzak was shite and soe were the diy technics !
Sinapat ng inyong trabaho
How much oil required for 1 hour burning
500ml
Why the pipes? Shalom you're loved 💔
a primeira ja é uma fraude ele ta usando gás no cano de baixo, a proposito todos estão recebendo gás , ou seja fraude em todas 😁🤣🤣🤣🤣🤣🤣🤣
Ggo k pla iba pnkta s. Lrawan. Tpos ngttabas kpa
Please I need text to corroborates my knowledge on this waste oil frabrication
Thank you for visiting
Bili ka ng gloves para sa safety mo.😂😂😂😂
Thanks 👍
THUMBS DOWN ! NO EXPLANATION !!!!!!!!!!!!!!!!!
Wala po bang amoy na oil ang usok nito ?
Nothing,
tag pila na boss pwde order ko
Not available my friend
pag saba na ok order ko
Nagbebenta kaba sir ng gawa mong de use oil tnx sa reply at magkano poh.
Thank you for like the project but all my project is for giving ideas
What's the point in having those gloves on nothing left of them
I don't have a budget yet so I'm just persevering first
nice gloves lol
whats the point , still using woods?
For me much better mix with woods because it is natural burning mechanism
What type of oil waste ? It is that of gas?
Used engine oil
@@creativeideas5041is it safe or carcinogenic?
cant handle the music
Thank you for watching next time I will low the volume of the music
Saan pwde bumili boss
Hi, thank you for watching
Smells good 🤣🤣🤣
Соблюдайте технику безопасности
Thank you for the tips
first one will crack up and fall apart from heating an cooling repeatedly like a road. bad idea
PINAHIRAPAN MO ANG SARILI MO MASYADUNG MARAMING PROSESO AT GAMIT BUMILI KANALANG NG GAS STOVE NGA NGA KARIN UMAYOS KA
Magkano po ganyan???
Not available
Ok
1 is too heavy.
Thanks for watching
That's too much work
Thank you
idol ok sana po yong imbento nyo kaso hindi po yan advisable sa health ng tao kasi yong usok ng langis nakaka cancer po yan
Unsafe ang grider ginamit walang guard
Sadly, burning used oil is carcinogenic.
No gaurd on the grinder, holding the workpiece that he's cutting, health & safety isnt big on this guy's agenda.
La première vidéo une connerie pour moi y’a un souffleur pour alimenter le feu pourquoi ne l avoir pas montrer
Dapat pakita mo umpisa hanggang sa huli daming cut
Thank you for watching
Hm po
Thank you
Curious where you get the fan and control shown at ua-cam.com/video/WpTbszU6NOU/v-deo.html
you can buy online like amazon/shopee/lazada
Very poor invention. Very hard to clean after used