Ну что же - очень даже неплохой видеоряд. Хотя есть замечания - не выполнена полировка ствола и некоторых деталей, что после покраски дало неровную поверхность. Выбор красить или воронить - всегда в пользу воронения. Я понимаю, что для красивой картинки для новичков надо вылить сразу полбаллона ВД-40 - "по-багатому", но для нормального специалиста смазки уходит много меньше и он никогда не будет так заливать предмет. Детали не просто посыпаются содой - они в ней прогреваются в микроволновке для лучшей нейтрализации кислоты. А после этого - дистиллят с нагревом и снятием щелочной патины. И лишь потом обезжиривание и воронение. В противном случае возможно продолжение процесса коррозии под краской (вот поэтому краску и стараются не использовать - микротрещины в красочном слое не дают вовремя увидеть процесс) Вощение воском приклада - втирание воска (непонятно что Вы использовали, скорее всего микровоск) без термической обработки феном и повторным втиранием или снятием лишнего не выполняется. После вощения приклад нужно полировать для лучшего вау-эффекта.
I agree at some points, but we cant be sure they didnt do everything you said not on the camera, otherwise the video wouldve been like 30 min long or more.
Надеяться изначально, что из винтовки можно стрелять - глупая идея. Железо изношено основательно, отсюда и выбор методов реставрации. Так что с этого взгляда - всё отлично. Затвор подергать и на стенку повешать... большего не стоит ожидать. За старания плюс.
Это отличный исходник под холостой патрон, нутрянка в сохране, комплектуха вся есть!, поверхностная чистка, чуток сварки, напильник, и вуаля. Судя по зеркалу затвора там и патронник в сохране :)
Может быть, затвор он оборачивал чем-то от перегрева, когда сопли наваривал... Но всё равно... страшно, даже холостыми. Если только их специально не ослаблять.
Awesome work! Genuine WW2 weapons are beautiful no matter which side they came from! It would be intriguing to find out where this weapon was used in battle..a local gun range has an MP40 you can rent to shoot..they said it was recovered in Berlin before it was brought to the USA after the war.. I've shot it a few times and it's an incredible piece of history
Вы представляете, в восьмидесятые годи прошлого века, у меня дома лежала ржавая царская трехлинейка. Такая же как эта. Лежала, потом выбросили. А ведь можно было отреставрировать.
@@Irusssska Probably, but the welding to "fix" the pitting on the barrel/action was on the outside............the inside was probably just as bad, and it isn't worth risking injury by subjecting it to high pressure. But I'd love to have it hanging over a fireplace.
I want to do that. But I need a subject too work with but I can't seem to find one. I love the old k98k. The a1 garand as well. Both such iconic rifles. Where do you find them all?
Hate to be that guy but yeah this was no good. Even the easiest things to not screw up….(inside of all K98K stocks were all UNstained). It’s either a wall hanger or a liability.
For a Rifle in this condition, after the Brass Brush treatment, a Bath in a solution of Sugar Cane Molasses mixed with water, at a rate of 1 part Molasses to 5 parts water, will clear all the Rust back to Grey Steel in a couple of Weeks. After washing down with a jet of water and further brushing, all the parts may be dismantled and the whole metalwork lightly oiled to prevent Rust. Then it can be decided how badly pitted the metal is, and whether a Re-blue is warranted. Deep pits can be TIG filled, but NO wire wheel brushing or belt finishing allowed... Fine Dremel or Air Tool for finishing welds is OK. Job on the Stock is OK. What is the Black coating? Suncorite or Cerakote ? Certainly hides the Pitting. DocAV
@steelgriffin9272 he didn't do it in the video, however he could have done it before recording. That being said, what you said has merit, because he should have shown that because some people could be doing this at home. I find all these videos interesting, I'm not restoring guns so it doesn't apply to me. Lol. But I agree. He should have shown it because you're absolutely right it's potentially dangerous and can kill you.
i personaly dislike this, normaly when someone restores they dont add fancy effects, they just fix the damn gun and then go shoot it because thats what theyre meanth for. just show off the gun, slowly and precisely. nothing else to it
Kar98 not K98, because K means Kanone and not Karabiner. The MKB 42 for example was called first MP42 later because of the Ammo to MK42, problem there MK means Maschinenkaonene, so they change it to MKB.
"K 98 " bedeutet Karabiner (18)98, mein Freund!!!! 1898 war das Jahr in dem dieser "Karabiner in die Produktion ging !!! Viele Grüße von einem alten "Waffennarren" und ehemaligen Soldaten! 😀😀😀😀
i m not to understand with the pick and wire brushing all u guys use i use a bead blaster with powder type media cleans very nice then soak it in toilet bowl cleaner then take apart save hours of elbone grease then after all done test fire it not restored unless u shoot it
@@Komik_1992 he’s right. At least a hundred more hours of work were left on the table. At least. There isn’t even supposed to be stain on the inside of the stock.
I think it was the worst "restoration" video of a k98 I've ever seen. 06:02 and why are you destroying the original tags?? this video was a pain to watch.
AND IF YOU DO PUT IT IN A VICE CALMP DONT CLAMP IT TIGHT LIKE YOU DID AND THE SPRING WAS RUSTY WELL THAT MEANS THIS VIDEO IS FAKE BECUASE THE MAG SPRING CANT GET RUSTY IS THE BOLT IS CLOSED BECUASE IT HAS A GOOD SEAL THERE
Gute Arbeit, hab ich sogar noch ein original Zielfernrohr dafür. Geschätzt wurde es vom Wehrtechnischen Museum, auf den Produktionszeitraum von 1905 bis 1908. ua-cam.com/video/JKrvjIfRtbk/v-deo.html
Ну что же - очень даже неплохой видеоряд. Хотя есть замечания - не выполнена полировка ствола и некоторых деталей, что после покраски дало неровную поверхность. Выбор красить или воронить - всегда в пользу воронения. Я понимаю, что для красивой картинки для новичков надо вылить сразу полбаллона ВД-40 - "по-багатому", но для нормального специалиста смазки уходит много меньше и он никогда не будет так заливать предмет. Детали не просто посыпаются содой - они в ней прогреваются в микроволновке для лучшей нейтрализации кислоты. А после этого - дистиллят с нагревом и снятием щелочной патины. И лишь потом обезжиривание и воронение. В противном случае возможно продолжение процесса коррозии под краской (вот поэтому краску и стараются не использовать - микротрещины в красочном слое не дают вовремя увидеть процесс) Вощение воском приклада - втирание воска (непонятно что Вы использовали, скорее всего микровоск) без термической обработки феном и повторным втиранием или снятием лишнего не выполняется. После вощения приклад нужно полировать для лучшего вау-эффекта.
I agree at some points, but we cant be sure they didnt do everything you said not on the camera, otherwise the video wouldve been like 30 min long or more.
@@Irusssska I'd love to be watching this masterpeace for 30+ minutes :D So i can't see a problem
True. We need to see all the processes. What if i want to try it myself, right?
@@RHGzxc maybe u r right idk, but for me its not diy its just relaxing ASMR vid with gr8 result😂 so im ok with this 15 min or so
@@Irusssska exactly if you assume this as ASMR - the more the better, huh?)
This is an amazing job, it may never fire again but now its a restored piece of history instead of scrap
Gutt gemacht
Excellent work but will it fire safely? You never show any shooting.
It doesn’t look like a bodge to me,looks very good!
This is not restoration this is cleaning
Is retoration cleaning oxide
Do you ever fire any of these projects, or are they simply decorations?
А что, у всех так легко земля щеточкой счищается? Особенно из всяких полостей))
Винты тоже смотрю легко откручиваются...
Wow, u made a candie out of that riffle😍
What's a riffle? Is that like when they raffle a rifle?
For what u started with its real good, as a teen i twisted the rcvr trying to remove an arisaka bbl without heat, so did a destruction test instead.
Надеяться изначально, что из винтовки можно стрелять - глупая идея. Железо изношено основательно, отсюда и выбор методов реставрации. Так что с этого взгляда - всё отлично. Затвор подергать и на стенку повешать... большего не стоит ожидать. За старания плюс.
Это отличный исходник под холостой патрон, нутрянка в сохране, комплектуха вся есть!, поверхностная чистка, чуток сварки, напильник, и вуаля. Судя по зеркалу затвора там и патронник в сохране :)
Может быть, затвор он оборачивал чем-то от перегрева, когда сопли наваривал... Но всё равно... страшно, даже холостыми. Если только их специально не ослаблять.
It's good, there's nothing terrible to say!!! Easy job!!!
Does it still work??
Thanks!
Awesome work! Genuine WW2 weapons are beautiful no matter which side they came from! It would be intriguing to find out where this weapon was used in battle..a local gun range has an MP40 you can rent to shoot..they said it was recovered in Berlin before it was brought to the USA after the war.. I've shot it a few times and it's an incredible piece of history
Вы представляете, в восьмидесятые годи прошлого века, у меня дома лежала ржавая царская трехлинейка. Такая же как эта. Лежала, потом выбросили. А ведь можно было отреставрировать.
Nice wall hanger.............but please tell me you're not going to fire it............................
Still can shoot with blanks i think
@@Irusssska Probably, but the welding to "fix" the pitting on the barrel/action was on the outside............the inside was probably just as bad, and it isn't worth risking injury by subjecting it to high pressure. But I'd love to have it hanging over a fireplace.
Mouser k98k is my favorite
Bravo! Complimenti. 👍👍
Did you weld over the na*i eagle?
매번 묻은 흙 색깔이 같던데 일부러 연출을 하시나요?
glad this guy keeps it's original form rather than making it a f*cking sporter rifle :)
Action wrench and barrel vise would be a good thing to have.
*You guys are magicians!*
I want to do that.
But I need a subject too work with but I can't seem to find one.
I love the old k98k. The a1 garand as well. Both such iconic rifles. Where do you find them all?
I have no doubt that this one will fire
Well yeah obviously + its meant to be restored not break apart again, do you think this guy has a gun license?
12:35 How is it possible to screw the barell inside by hand only ? On my project its not possible... any ideas why ?
Dont EVER Let this man near a gun again OH God what a mess!
👊🇹🇷👊okey guzel temizlik.eline saglik.👊🇹🇷👊
This is not a restoration, it's a bodge.
Hate to be that guy but yeah this was no good. Even the easiest things to not screw up….(inside of all K98K stocks were all UNstained). It’s either a wall hanger or a liability.
Away and bile ur heads the both of ya
What wood oil did you use?
Mantap..👍
wow ! Awesome Work 😍
He should not be allowed to touch a single gun after this
RESPECT !!!!!
Great work as always my friend. 😉😉
And the fire test?
Cool Kar98k
It’s perfect
nice work 👍🏻
For a Rifle in this condition, after the Brass Brush treatment, a Bath in a solution of Sugar Cane Molasses mixed with water, at a rate of 1 part Molasses to 5 parts water, will clear all the Rust back to Grey Steel in a couple of Weeks.
After washing down with a jet of water and further brushing, all the parts may be dismantled and the whole metalwork lightly oiled to prevent Rust.
Then it can be decided how badly pitted the metal is, and whether a Re-blue is warranted.
Deep pits can be TIG filled, but NO wire wheel brushing or belt finishing allowed...
Fine Dremel or Air Tool for finishing welds is OK. Job on the Stock is OK.
What is the Black coating?
Suncorite or Cerakote ?
Certainly hides the Pitting.
DocAV
I would have boiled it and the rust would have been permanently dealt with in about 30 minutes
Ещё сохран хороший без больших раковин!
Que munición usa esa arma
Might as well of just scrapped it after butchering it like you have
He saved what do u mean
@@CuriousGamer022hes implying the restoration is unproffesional
@steelgriffin9272 I wouldnt say that,he's done a good job tbh
@@CuriousGamer022 well he didnt check if the barrel is empty or not which could be deadly
@steelgriffin9272 he didn't do it in the video, however he could have done it before recording. That being said, what you said has merit, because he should have shown that because some people could be doing this at home. I find all these videos interesting, I'm not restoring guns so it doesn't apply to me. Lol. But I agree. He should have shown it because you're absolutely right it's potentially dangerous and can kill you.
Dejame adivinar, lo oxidaste tu mismo con agua y electricidad, lo enterraste en tu patio un par de semanas y después "lo restauraste"
Прям чердачный сохран.
Ile dajesz soli na litr wody?
Не верю, тонкие металлические детали в земле рассыпаются в труху
😍👍Wooooow beautyfl
Würde gerne auch dein ersten Schusstest sehen wollen 😂
never happens 😢
Omg you've had 2 dead peaces of this rifle :D I am shocked. Awesome job keep it going!!!!
are you implying this as a joke or legitimately
@@huskiesarecool1274 i am 100% serious, no jokes
This Is awsome tun
Gute sob
wow, excellent job my friend….. 🔧🛠️🔩⚒️⛏️🔨👏👏👍👍🍻🔧
Guys you should make one video with no editing 24 hours restoration, it will be fun and a lot of views
I think it took much more then 24h
@@Irusssska well i am not sure about time i took but i meant full process :D
That thing may take a month or so to finish I suppose 😂
@@Irusssska so you think they started making these videos last year and they have like a hundred of people to make videos 😁?
Ive counted like 6 atm🤔
I just want to know how did it end up like this?
It was forgotten in the battle field for many years probably in trench that was filled in
do you sell it ?, how much? .
Very good restoration job, it turned out great, it would be nice if you had tried it at the end, but it is an amazing job!!
Круто
Some German fought and died with that rifle for you to do what you’ve done to it!
ok you DONT use a wire brush to scrape the rust off because it will permiltey scrach the barele
где можно купить такие?
i personaly dislike this, normaly when someone restores they dont add fancy effects, they just fix the damn gun and then go shoot it because thats what theyre meanth for. just show off the gun, slowly and precisely. nothing else to it
6:02 in the video is not ok
Если Бы я в таком состоянии нашел бы к вечеру она уже стреляла бы.
thank god for grinders, those welds were nothing but birds nests! get better welder or welding unit!
6:03 AAAAH my eyes
Kar98 not K98, because K means Kanone and not Karabiner. The MKB 42 for example was called first MP42 later because of the Ammo to MK42, problem there MK means Maschinenkaonene, so they change it to MKB.
"K 98 " bedeutet Karabiner (18)98, mein Freund!!!! 1898 war das Jahr in dem dieser "Karabiner in die Produktion ging !!! Viele Grüße von einem alten "Waffennarren" und ehemaligen Soldaten! 😀😀😀😀
10:48 just pay attention...
Sorry but, thats not a restoration, welding a tube and using sandpaper? seriously? Ruined the gun.
😢 tout allait bien jusqu'au soudure !!! 😡 Un morceau d'histoire ne se modifie pas !!! On le restaure sans le modifier 😡
i m not to understand with the pick and wire brushing all u guys use i use a bead blaster with powder type media cleans very nice then soak it in toilet bowl cleaner then take apart save hours of elbone grease then after all done test fire it not restored unless u shoot it
بنازمت شیر کلو
Horrible restoration
Why?
@@Komik_1992 he’s right. At least a hundred more hours of work were left on the table. At least. There isn’t even supposed to be stain on the inside of the stock.
Ура
Guys, why you say, this is bodge?😢
I call bs there is no way he took that reciever off with channel lock pliers
I think it was the worst "restoration" video of a k98 I've ever seen. 06:02 and why are you destroying the original tags?? this video was a pain to watch.
Just saw swatsika
Dont see the point if you are not going to explain what you are doing
AND YOU DONT PUT IT IN A VICE CLAMP BECUSE IT WILL SQWISH THE BARLE AND THE BOLT
The barrel came off the receiver way too easy!
Fake
AND IF YOU DO PUT IT IN A VICE CALMP DONT CLAMP IT TIGHT LIKE YOU DID AND THE SPRING WAS RUSTY WELL THAT MEANS THIS VIDEO IS FAKE BECUASE THE MAG SPRING CANT GET RUSTY IS THE BOLT IS CLOSED BECUASE IT HAS A GOOD SEAL THERE
bs
溶接を直接撮るな！スモークかけろや！
Quedó feo!!!!
fake
Где ты их берёшь
A nazi rifle wow
When i see... Weapon paint i stop video
พิมพ์เป็นภาษาไทยครับ พิมพ์เป็นภาษาไทย
фашизм и его символика это нехорошо
Use it u sanamabicth
Gute Arbeit, hab ich sogar noch ein original Zielfernrohr dafür. Geschätzt wurde es vom Wehrtechnischen Museum, auf den Produktionszeitraum von 1905 bis 1908. ua-cam.com/video/JKrvjIfRtbk/v-deo.html
ua-cam.com/video/JKrvjIfRtbk/v-deo.html
Where would anyone find old guns that are that fucked up?