Whats the maximum height for the drain line? I would like to install this beside my Washing machine using the same drain, but the drain opening is about 40 inches above ground.
Why so complicated and expensive? For clean water you need: - Water supply valve for Reverse Osmosis - 1/4 inch Tube Float Valve Kit for Reverse Osmosis - Leak Protection Valve For Reverse Osmosis (based on expandable pads) For drain you need: - check valve or elbow, tube and drill Total cost is 30-50 usd
@@iPTRiMaper not yet, I have warranty 2 years. I think the system will not know about this simplified kit and will send message to clean dirty water after each cleaning.
Because it‘s an actual kit with water pressure regulation, filters and leak detection… No one said it possible to make it cheaper. But the vacuum already costs over 800$
@@010falcon water pressure regulation is usually required for entire not individual for each toilet cistern. But still price $200 is too big for vacuum less than $1000
@@AndreyKostromin again there are sensors. Electronics, couplings, pressure regulator, pump for the waste water… These parts alone would cost you some 50$ or more. Then they have made it look nice with injection molded parts and easy to install for everyday people. Say in total 80-100$ to produce. 200$ is justified in my opinion. I cost roughly 30$ an hour and up. My company sells my time for 250$/hour. If I waste 2-3 ordering parts, installing them, wiring them up. Fixing issues. It costs me more than paying 200$. How much do you value your time? That’s the question. I can do electronics, not plumbing, if you can do it, then do it.
Please bring this to the US. It's a game changer for robovacs and makes the Dreame robo-vacs a no-brainer!
I found it on Amazon, great invention！
@@eonecen9507 really? Do you have a link to the kit?
@@eonecen9507 where at?
Whats the maximum height for the drain line? I would like to install this beside my Washing machine using the same drain, but the drain opening is about 40 inches above ground.
Can I buy this kit in Australia?
Can it be installed for Dreame X40?
very helpful , thank you
Why it doesn’t work in the usa
Easy. Thx
for L20 Ultra?
Can I install it for L10s ultra?
Proce
Русская версия
Why so complicated and expensive?
For clean water you need:
- Water supply valve for Reverse Osmosis
- 1/4 inch Tube Float Valve Kit for Reverse Osmosis
- Leak Protection Valve For Reverse Osmosis (based on expandable pads)
For drain you need:
- check valve or elbow, tube and drill
Total cost is 30-50 usd
did you done that this way? i was thinking same way, but how to tell to application that this system is connected if you dont have this module
@@iPTRiMaper not yet, I have warranty 2 years. I think the system will not know about this simplified kit and will send message to clean dirty water after each cleaning.
Because it‘s an actual kit with water pressure regulation, filters and leak detection…
No one said it possible to make it cheaper. But the vacuum already costs over 800$
@@010falcon water pressure regulation is usually required for entire not individual for each toilet cistern. But still price $200 is too big for vacuum less than $1000
@@AndreyKostromin again there are sensors. Electronics, couplings, pressure regulator, pump for the waste water…
These parts alone would cost you some 50$ or more. Then they have made it look nice with injection molded parts and easy to install for everyday people. Say in total 80-100$ to produce.
200$ is justified in my opinion. I cost roughly 30$ an hour and up. My company sells my time for 250$/hour. If I waste 2-3 ordering parts, installing them, wiring them up. Fixing issues. It costs me more than paying 200$. How much do you value your time? That’s the question.
I can do electronics, not plumbing, if you can do it, then do it.
yeah thanks for nothing.. aint working
Yeah, rich people are bad at installing stuff themselves. Just pay for some technician to do it. He will make it work