I read of a class action lawsuit against GM, but oddly it only goes back to '08, (not the '07 where this began), as I understand it. I'm sure this has something to do with a statute of limitation. And I have not read of the outcome.
Even the plastic that is deeper cracks. Its sad. Sucks to work on if they are older. Had to go into the tailgate and cracked that panel. They make the clips to strong for the shitty plastic
Thank you for this video. I think I may soak mine in Armour All and maybe lay a few lines of silicone on the back side for counter vibration and cracking measures.
Where do you but the actual dash replacement I've been looking fir weeks all I can find are caps and covers. Existing dash is missing chunks sono cover will work any pointers sre appreciated
I would assume something has been done, probably not a change in material (ABS), but perhaps added thickness or more importantly gusset type molded in re-enforcing at the weak points. I have cracks EVERYWHERE in mine and missing pieces. Very susceptible to UV damage, so after you change it, cover it with a dashmat.
Does the 2010 Chevy Silverado with the word truck 8 the Same procedure am I 2nd question is what is the part number for the 2008 Silverado work truck Dashboard
Great video and thanks for the info but quick question do I have to take out the whole dashboard just to replace the alarm light in the back Center for some reason on my 08 Yukon Denali it's no longer flashing and I think it needs to be replaced any suggestions
@@best_technician sorry after doing a little bit more research it's a ambient light sensor not a alarm Light That is supposed to flash sorry I always thought that what it was
Great video bro I'm looking to get my dash replaced. I have an expensive car audio system in my car... how much tampering with that would happen if I were to get this replaced?
2007-2014 Avalanche, Silverado, Tahoe, Suburban, Yukon and, Escalade all have the same dashboard. You can only get this part from GM. Nobody else makes it. Just give your VIN to parts department when ordering and you will get the one that fits your truck.
Quick question: where did you order the dash from? I didn’t see any reference to that. I was look for it in the description section 😊👍🏾 But this was Super Helpful!! I’m doing the same thing, just need thy info on where to order it. I’d sure appreciate it. Sid
I followed your video and the dash process worked perfect, thank you. My issue came up once I tried to restart the truck. I disconnected the battery before I started and now it won’t start. It starts 3 times in a row for about 2 seconds then dies each time. After that it won’t even try to start. Did you have this issue or have any ideas?
Part number for the dash without the center speaker is 1933-1336. It usually runs close to $600 but the Chevy dealer in my area gave it to me for $500. I recommend removing the steering wheel and disconnecting the negative terminal on your battery prior to doing this job. It’s a tedious job but, just be patient and take your time. Took me four hours from start to finish. Side note: Chevy has changed the material of this dashboard. Also, even if your vehicle is garaged, it can still crack (old part number) because it is the change in temperature that would make it crack.
@@best_technician I called a local dealer here in Denver, CO and they told me GM doesn't stock these dashboards anymore. They suggested a dash cover!! yikes!!
If you are talking about the Passenger side airbag then you have to get To the screws through the glove Box . Just Remove the glove Box and then get to the screws through there
Is it that difficult to do this. I want a new dashboard and willing to pay the $500 some for the new dashboard(part), but it would be an extra $600-700 just for the labor to install it and would be more than the part itself at a Chevy dealership.
The fix to rattles on this dashboard is to add rubber spacers to all the bolts when installing. I did exactly that and now I have zero rattles even when crossing railroad tracks.
The "Instrument Panel" is one piece, and then in front, between it and the windshield is the "Upper Trim Panel". If your replacing the instrument panel it would be such a mistake not to also replace the Upper Trim Panel. Both of these in my '07 Chev LTZ are in multiple pieces and you can't replace the Upper Trim Panel without R&Ring the Instrument Panel.
I know this is a 2 year old video.at this point but can any body tell me the r&r time on this? I'm gonna have to do this to the wife's yukon so I can access the sunroof drain tube where it connects to the boot to go out of the vehicle. It's leaking there and I see no other way to access it.
The drain tube is located right above the sun visor , and if you want to reach the bottom of it , you can't or you have to cut some of the steel. It happened to me one time ,and I had to create another drain line .
@@best_technician part number is 19331332 instrument panel gmc yukon 07-14 GMC parts will deliver it to your local GMC dealer make sure you do a color match this one is cocoa. Price is $677 plus tax. Your welcome
GM got away with this, This should have been recalled ...
I read of a class action lawsuit against GM, but oddly it only goes back to '08, (not the '07 where this began), as I understand it. I'm sure this has something to do with a statute of limitation. And I have not read of the outcome.
Does this mean the 2010 is covered?
Yep. I've had 3 and mine is garage kept. Ridiculous
Dodge also with the Ram trucks.
Even the plastic that is deeper cracks.
Its sad.
Sucks to work on if they are older.
Had to go into the tailgate and cracked that panel.
They make the clips to strong for the shitty plastic
THAT'S IT ! I'm trying to do mine myself. This video was self explanatory.
Amazing job , need to do the same in my 2007 SLE yukon thanks for this video
I'm looking for that exact same dashboard. Where did you order it or find it?
Did you find out were
Thank you been trying to find a video that shows this!!
Thank you for this video. I think I may soak mine in Armour All and maybe lay a few lines of silicone on the back side for counter vibration and cracking measures.
Fyi: the silicone works! Soaks up so much vibration too.
would probably be a good idea to use a trim removal tool rather than a screwdriver.
that's right he should use a Milwaukee screwdriver😅😂😂
Damn, pull out the key
😂😂😂😂next time
I have the same problem with my 2014 Tahoe and it’s always in the garage I wish GM don’t use cheap shit again
They want ever stop because they don’t there cars and truck last for ever. They need to sell
Can I do this on my 2012?
Where do you but the actual dash replacement I've been looking fir weeks all I can find are caps and covers. Existing dash is missing chunks sono cover will work any pointers sre appreciated
How long did that take you to do?
Very helpful video thank you👍👍
mine is just starting to crack. but this doesn't look nearly as hard as most other dashboards seem to be.
Great job!👍
Hola donde encuentro ese tablero en oklahoma
where did you get the part i lived in houston and i cant get it
From GM dealer .
Is the new dash you purchased made out of any type of upgraded material? Has anything been done to prevent future cracking?
I installed a new dashboard on my 2007 Avalanche and the material has been upgraded to withstand temperature changes.
I would assume something has been done, probably not a change in material (ABS), but perhaps added thickness or more importantly gusset type molded in re-enforcing at the weak points. I have cracks EVERYWHERE in mine and missing pieces. Very susceptible to UV damage, so after you change it, cover it with a dashmat.
So the REAL question is. Where did you find one WITH the speaker cut out. :) - Great vid!
Lol that’s what I want to know
Thanx for the video
Does the 2010 Chevy Silverado with the word truck 8 the Same procedure am I 2nd question is what is the part number for the 2008 Silverado work truck Dashboard
How much would u charge to install this ?
Around 500 $
When did you remove the passanger airbag wtf lol 😂😂
What the issue is your speaker is heavy puts weight on the dashboard put something under your speaker and it won't crack again.
Where can i buy the dashboard for mine? Need help finding one
You can find it online
Great video and thanks for the info but quick question do I have to take out the whole dashboard just to replace the alarm light in the back Center for some reason on my 08 Yukon Denali it's no longer flashing and I think it needs to be replaced any suggestions
I don't think you have to. Just take The back cover of where is the alarm light at .
@@best_technician sorry after doing a little bit more research it's a ambient light sensor not a alarm Light That is supposed to flash sorry I always thought that what it was
@@azrael80304 no problem 😊 .
4pm what is the entire dash called
Can you do a more detailed video when you do it again
Do you have to lower the steering column? And what tools do you need
Great work make it easy, where you get this dash board i need to replace my car too
Online.
Great video bro
I'm looking to get my dash replaced. I have an expensive car audio system in my car... how much tampering with that would happen if I were to get this replaced?
You can do it even if you have that audio system .
The bass is going to crack it again
Get a fiber glass one I got one for my truck works perfect
@@semajd5995 it might but it was cracked before I installed the system
Mashallah u make it look so easy
Does the Cadillac Escalade Have the same dashboard
2007-2014 Avalanche, Silverado, Tahoe, Suburban, Yukon and, Escalade all have the same dashboard. You can only get this part from GM. Nobody else makes it. Just give your VIN to parts department when ordering and you will get the one that fits your truck.
Quick question: where did you order the dash from? I didn’t see any reference to that. I was look for it in the description section 😊👍🏾
But this was Super Helpful!!
I’m doing the same thing, just need thy info on where to order it.
I’d sure appreciate it.
Sid
I got it from the dealer
great job, thank you for sharing
How How long did it take to do
5 hours
Can you do a more detailed video when you do it again
Do you have to lower the steering column And what tools do you need
The GMC must replace the dashboard free of charge for all Yukon cars from 2007-2014
I agree
Are you saying there is an active RECALL from GMC on these dashes? Tgat my GMC dealership WILL replace the dash for free?
hey, how you doing… question Where do you order the dashboard???
I order it online
@@best_technician on a specific page...?
Just put your car type and it will show you many options
I followed your video and the dash process worked perfect, thank you. My issue came up once I tried to restart the truck. I disconnected the battery before I started and now it won’t start. It starts 3 times in a row for about 2 seconds then dies each time. After that it won’t even try to start. Did you have this issue or have any ideas?
No I didn't have any problems. But I think you now have issues with the immobilizer or Alarm system
Can I get to the heater core this way or does the entire dash need removing?
I'm wondering too
The entire dash needs to be removed 😭
Bro do you have a part number for the dash...?
Part number for the dash without the center speaker is 1933-1336. It usually runs close to $600 but the Chevy dealer in my area gave it to me for $500.
I recommend removing the steering wheel and disconnecting the negative terminal on your battery prior to doing this job. It’s a tedious job but, just be patient and take your time. Took me four hours from start to finish.
Side note:
Chevy has changed the material of this dashboard.
Also, even if your vehicle is garaged, it can still crack (old part number) because it is the change in temperature that would make it crack.
How much does a replacement like this cost? I have an 09 with a severely cracked dashboard.
$400 for part
It's like $850 for everything
@@best_technician is $850 what I can expect if I take it to a gm dealer?
I think if you take it to the gm the labor is going to be more than that
Abdel Mechanic where can you find the dashboard at
How much is the dashboard? Taho 2007
do i need to disable the passenger airbag to do this?
Yes
How long did it actually take you?
3 hours
It's talk from 2 to 7 hours . So it depends on your skill
Damn that's quick lol
Can you please tell me where did you buy the dashboard replacement from? Thank you.
I got it From the dealer.
You can look for it online.
@@best_technician I called a local dealer here in Denver, CO and they told me GM doesn't stock these dashboards anymore. They suggested a dash cover!! yikes!!
Try online
What tools do I need to get ready sir?
7 ,8 ,10 , mm sockets and Screw drivers.
AndTrim Removal Tool
how long did this actually take ? From start to finish?
It's like 10 hour job but I did it in 5 hour
@@best_technician Where are you out of ? Would you do my 2010 gmc ? Be glad to pay you !
@@dimasbeltran866 this is my location g.co/kgs/wMZT5x
@@best_technician Thank you so much for responding. You're a like a million miles from me sadly ! But, great video though. Thank you so much ! 👍👍👍
@@dimasbeltran866 your welcome
Did you get an airbag light in the dashboard after disconnecting it ? And if you did how did you reset it
No I didn't . If you have the light on then you left some wire disconnected
I'm going to change my interior on my 3500 this weekend thanks for the info
Hey can I get info from where you bought the dash
From the Dealer
@@best_technician how it cost you?
@@robertoprieto-cisneros741 500
What about the air bag?? Ive been told you have to remove it. how did you get around that?
If you are talking about the Passenger side airbag then you have to get To the screws through the glove Box .
Just Remove the glove Box and then get to the screws through there
Main thing is disconnect the battery so you won't trigger an airbag.
Good work
Where are you located?
in New Jersey
@@best_technician I’m in New York…where can I buy the dash and what’s your schedule looking like?
@@semajd5995 i just got it from the dealer but it's expensive .
You could try online.
We are open form Monday to Saturday
Where did you order this whole dash at?
On line
@@best_technician That's nice, how about more specifically where on line. Like give a link to the actual item. :)
Mine has a big crack and that damn thing just rattles
How much does it cost to replace for a 2007 surburban LTZ????
About 900
lot of stuff he didn't show during the uninstall of old unit as well as install for new unit
Is it that difficult to do this. I want a new dashboard and willing to pay the $500 some for the new dashboard(part), but it would be an extra $600-700 just for the labor to install it and would be more than the part itself at a Chevy dealership.
Look online you might find it cheaper.
@@best_technician in terms of installing it, is it that difficult or should I just let a mechanic do it @ a Chevy dealership.
@@willgill229 it's not hard to do ,it just you have to remember how to put it back again. Plus slow down and take your time.
@@best_technician okay thank you, did you have to mess with the passenger airbag?
@@willgill229 i forgot because I did alot of different cars, but usually there are screws hiding right behind the glove box.
Estoy en Colombia y necesito un tablero completo para una chevrlet thaoe 2010 donde lo puedo comprar gracias por la ayuda
Los tienen en eBay también saludos
I need to replace my whole dashboard, has any one found a new dashboard not made of the same material ? if so Where? part number>?
where can i find a dashboard
Online
Door dinger the whole time huh lol
Door ding until 2:16
Where you buyed the dashboard
From the dealership for $400
@@best_technician ohh you have de websai es new oh used
@@gustavogutierrez392 its new . I bought it from the GMC dealership
Ohh ok
Hola muy buen trabajo que parte de New Jersey te encuentras me interesa arreglar tengo el mismo problema en mi Tahoe
I don't speak Spanish
Sorry
I couldn’t see what you did with the airbag cover
There are screws in side deep the glove box. Take the glove box os and they are deep in .
That looks like a fucken head ace
But did you fix all the rattles this dash has?
Yes
@@best_technician ive been slowly hunting them down and adding fatmat. PITA!
@@Giroux68 all got the broken dashboard i changed alot of them
@@Giroux68 Its a never ending battle with mine 😂
The fix to rattles on this dashboard is to add rubber spacers to all the bolts when installing. I did exactly that and now I have zero rattles even when crossing railroad tracks.
How much $$$
U The Man Bro U Did Dat
I didn't realize that was one piece
The "Instrument Panel" is one piece, and then in front, between it and the windshield is the "Upper Trim Panel". If your replacing the instrument panel it would be such a mistake not to also replace the Upper Trim Panel. Both of these in my '07 Chev LTZ are in multiple pieces and you can't replace the Upper Trim Panel without R&Ring the Instrument Panel.
Wonder how much that dash cost?
Around 900 between part and labor
@@best_technician 😯
Where did u get the dash
Where are you located and how much to do one for a 2011 Yukon. Im a dealership in Virginia
I am in new Jersey .
I know this is a 2 year old video.at this point but can any body tell me the r&r time on this? I'm gonna have to do this to the wife's yukon so I can access the sunroof drain tube where it connects to the boot to go out of the vehicle. It's leaking there and I see no other way to access it.
The drain tube is located right above the sun visor , and if you want to reach the bottom of it , you can't or you have to cut some of the steel.
It happened to me one time ,and I had to create another drain line .
Why wouldn't you leave a link or a gm part number if you really purchased from the dealership is that so hard. Sus
The customer got it for me .
@@best_technician part number is 19331332 instrument panel gmc yukon 07-14 GMC parts will deliver it to your local GMC dealer make sure you do a color match this one is cocoa. Price is $677 plus tax. Your welcome
👌🏼
Wish you had a step by step vid lol
Sorry about that. I just don haven't enough of the time.
Disconnect the battery before trying this...
Oh hell nooo...I ain't doing all that...
It doesn’t seem that bad. I’ve removed dashes worst then that.
Hey brother would you come to Clifton NJ 07503to do this job
Sorry . I can't yes are 1 hour and 45 minutes away .
You can bring your car to my shop if you would like to.
Donde consigo uno para una tahoe 2011
So lame te la puedes conseguir con Chevy. Nadie más fabrica esta parte.
Ok gracias!!! Salieron de bien mala calidad ! Esos frentes la mía está toda quebrada 😡
Si piensas comprar la respuesta, te costará más o menos $500. Solo le das el VIN de tu vehículo y te dan la parte correcta.
So basically, it's not worth changing 😂
Dashskin
Maybe i just buy a cover de peluche como los taxistas de poaká!!😂
It's not that hard to do 😂
@@best_technician i will try ome day!👍👍
@@best_technician thanls for the vid bro!!!
👍🏽👍🏽