How to Install iSpeed Wind Deflectors: Step-by-Step Guide" Easy DIY Instructions

Поділитися
Вставка
  • Опубліковано 29 гру 2024

КОМЕНТАРІ • 45

  • @scottrodgers-q6g
    @scottrodgers-q6g 11 місяців тому +8

    For all how may have a couple of questions….
    When fitting, you may have to bend quite a bit to get the whole thing in, do not worry, they are quite durable with strength so don’t worry about cracking, put on plenty of pressure.
    Which way should the clips be facing? If you watch 5:14, it will show the spike should be facing in towards the car
    Should I put clips on the front also? You can if you wish, although they should be a tight enough fit without needing this, so do the rear only.
    After fitting the front ones, my windows won’t go all the way up! Bring your window up and down, using your hand also as a small amount of pressure, and eventually bring the window all the way up using also the palm of your hand keep it like this for around 1 day, and when you next put the window up and down, it will go all the way. If you still have troubles, at the end (beside wing mirrow) pull it a slightly away from the car, and try again. You should hear a slight clicking noise.

  • @LondonLife-nl2nu
    @LondonLife-nl2nu Рік тому +3

    I purchased the BMW e90 for my car, and Fiesta MK8 for my friend, they fit perfectly and really easily.
    Will buy again from the same seller if needed...

  • @damienbrown5067
    @damienbrown5067 Рік тому +3

    Mine fitted perfectly. Thanks for the way the clips went in. Lets see how are on the M1 tomorrow.

    • @saif1coolguy1
      @saif1coolguy1 8 місяців тому

      How do they fair at high speeds?

  • @paulrichards7587
    @paulrichards7587 4 місяці тому +2

    I’ve just got mine through the door Saturday afternoon. I wondered how the clips go on as well because I thought I’ve been type all the way along the front ones but the type seems to be on the back ones all the way along and still got the clips on I will try it and see what happens I suppose. Thank you very much.

  • @traceywilkinson6173
    @traceywilkinson6173 Рік тому +11

    The strips of double sided tape on the long edges are so thin and short (not like in the video) I don't think they will do much. I'll put the clips in the rears but I've had to look in the comments to see if they are needed on the front.

    • @prayanpradhan
      @prayanpradhan Рік тому +2

      I definitely needed the clips for the rear but havent used them fron the fronts. They seem to be a snug fit and is on there quite solidly.

    • @traceywilkinson6173
      @traceywilkinson6173 Рік тому +6

      Update: They've now been on for 2 months and I've had no issues and driven on the motorway, very heavy rain and been through a car wash.

  • @AbdulQadeer-bh2hr
    @AbdulQadeer-bh2hr Рік тому +5

    I appreciate how the tutorial made everything clear 🙌.. Thanks for sharing your expertise and making it so easy for me to install these wind deflectors on my own!

    • @ibra82
      @ibra82  Рік тому +1

      Glad it was helpful!

  • @garryb8081
    @garryb8081 6 місяців тому +1

    Great informative video, had no fitting instructions & this was a great help. 👍

  • @swescapedude
    @swescapedude Рік тому +1

    Thanks for your video, mine just arrived from you for my e90

  • @138Tuber
    @138Tuber 5 місяців тому +1

    Excellent video. A note to say after putting both in the front window deflectors there's a noise, a soft thud, as the deflectors push into their original space. So I'll keep them shut for a week to see if this disapperars. Is this normal ? Thank you. Quality product.

    • @abusufian7966
      @abusufian7966 2 місяці тому +1

      Did this resolve? I have just installed mine and I am getting the same noise. Just want to make sure I've installed it properly, and the noise will go away.

    • @chebz1136
      @chebz1136 Місяць тому

      @@abusufian7966did the noise go away ?

  • @marktravers6583
    @marktravers6583 15 днів тому

    Impossible to install unless I've been sent the wrong ones for my fiesta 2021. Which I've been told I haven't?!!The only way to install them is to put the front lip inside which means the window won't open and has scratched the inside of my car and cracked the deflector. By trying to rest the front lip on the outside edge and trying to work back it doesn't work and has scratched the rubber on the outside of the window trying to install. Not happy.

  • @barredfrompup
    @barredfrompup 6 місяців тому

    Are those metal clips just for back windows or front too?

  • @harrisonpriest8441
    @harrisonpriest8441 5 місяців тому

    Mine have came. What's the long strip for? Why did mine come with 2 small strips and 1 long strip? Shouldn't there be 4 smaller ones

  • @KamranKhan-hb3iw
    @KamranKhan-hb3iw Рік тому +6

    Good video, some nice little pointers i.e. where to fix the clips and which way round to have them. Just fitted mine this evening, looks very nice and more attractive....
    Now after watching these guidlines, will not fail to fit again in future......
    Appreciated...

    • @gibbs537
      @gibbs537 Рік тому +2

      Which way round do the clips fit ?????

    • @LondonLife-nl2nu
      @LondonLife-nl2nu Рік тому

      ❤ the spikes of the clips towards the rubber trim just need a little push with a screwdriver...

    • @scottrodgers-q6g
      @scottrodgers-q6g 11 місяців тому

      5:14 shows which way to fit it, just watch closely. The spike facing into the car.

  • @AndrewVanDay
    @AndrewVanDay Рік тому +6

    Very helpful, but the fitting of the rear window clips was not as clear as it could have been as hands obscured the view. If this video is produced by the manufacturers I would just like to say it would be nice to see these also made without tint. I just don't see the need for them to be tinted, it just reduces vision.

  • @Davespencer052
    @Davespencer052 3 місяці тому

    Can you get thease for a s3 22 plate audi

  • @TheSnozwangler
    @TheSnozwangler 4 місяці тому +1

    My honda crv deflectors don't fit too well. You can see the parts that slide into the channel when installed. The front windows don't like them either. Tried pulling them and pushing the windows but they don't wanna know... 😢

    • @ibra82
      @ibra82  3 місяці тому

      @@TheSnozwangler do you mean the metal clips, we would recommend to use the front deflectors without fitting the clips as they should fit securely.

    • @TheSnozwangler
      @TheSnozwangler 3 місяці тому

      @@ibra82 no, not the metal clips but the actual plastic of the deflector.

  • @Kukong75
    @Kukong75 Рік тому +2

    The clips cannot be installed properly in Peugeot e-208.
    The clips seems to fall off after installation.

    • @seanwallace1972
      @seanwallace1972 8 місяців тому

      Yes mine were the same felt loose when I fitted them

  • @Staples-King
    @Staples-King Рік тому +1

    After 4 months, are they good? They are durable?

  • @samgill133
    @samgill133 Рік тому +5

    Hello, are no clips needed for the front window?

    • @ibra82
      @ibra82  Рік тому +3

      In most cases you do not need the clips for the front wind deflector, once fitted, check if there is any movement of the deflector inside the channel.

  • @seanwallace1972
    @seanwallace1972 8 місяців тому

    Some of the clips when fitted don’t seem tight what can I do

  • @khalilrazak6486
    @khalilrazak6486 Рік тому +1

    Can you not use a dab of super glue to fit them in the channel's so that they don't fall off at high speed's or strong winds.

    • @ibra82
      @ibra82  Рік тому

      Yes you can use super glue but we would recommend to apply on a very small area on two different spots.

    • @andrewlaw
      @andrewlaw Рік тому

      Why would they fall off? If driving at high speed the windows would be closed pinching the flange of the wind deflectors between the glass and door frame. They only time they could possibly fall out is when the windows are open and not pinning them.

    • @paulfuller2515
      @paulfuller2515 5 місяців тому

      In strong winds the windows will probably be up.. holding them
      In place

  • @paulfuller2515
    @paulfuller2515 5 місяців тому +1

    Mine came with metal clips??

  • @lucabegni886
    @lucabegni886 8 місяців тому

    Bro clips are inside the pack? Or you have to bought outside?

    • @ibra82
      @ibra82  8 місяців тому +1

      Clips are supplied with the deflectors

    • @lucabegni886
      @lucabegni886 7 місяців тому

      @@ibra82 thanks mate

  • @gk4874
    @gk4874 Рік тому

    Fitted mine today then warhched the video. Double sided tape is too weak. Clips causing problems but will reinstall them only at the back. I suggest a thin rubber to seal. Rubber to rubber will not slip and there will be no need for the clips.

  • @chrisnicholson3363
    @chrisnicholson3363 Рік тому +1

    So why did I get metal clips with mines

  • @gti2603
    @gti2603 Рік тому +1

    pas convaincu que ça tienne bien dans le temps ?????????????????