WRAVOR Horizontal band SAWMILL WRC 1250 AC
Вставка
- Опубліковано 10 лют 2025
- The all new, WRAVOR WRC 1250 AC band saw from WRAVOR.
maximum production
minumum labour
faster hydraulic functions for log manoeuvring
structural improvements and engineering solution
manual / automatic cutting options -computer controled
more:
www.wravor.com
I don't think there is anything that can compete with your mill as I have seen a few but just wow!!
This machine has different speeds to up production . I've ordered this addition 1250 and the 750 multi rip saw any the cross cutter delivered for December this year , I looked at 4 different suppliers of these saws & wravor was the company I chose regarding quality & high production . Can't wait .
what kind of coin?
PODRIAS COMENTARME, COMO TE HA FUNCIONADO, O LA CAPACIDAD DE PRODUCCION POR HORA, ME INTERESA MUCHO TU COMENTARIO GRACIAS
How much is each unit costing. My email munyamaraphael@gmail.com
How much does it cost?
child labor, no eye protection, no hearing protection but they've got the fancy uniforms and accessories. nice machine. i love it when they say minimum labor but they don't count the maintenance crew required to keep it running. and the logs are automatically transported to the cutting bed i suppose.
Very impressive design. What I mis is ear/hearing protection for the workers!!!!
Minimum labor - three and a half. :-) I like how those big men just push buttons and pedals and the only kid in the shop carries boards.
The best sawmill Ive seen , really smart operation.
Odličen stroj in odlična glasbena izbira! Hvala za video!
Great machine and great music choice! Thanks for the video !!!
Damm. I always wanted something like this in my backyard. 😀
Max
beautiful piece of machinery. I could imagine this will be feasible as local production pine in countries like brasil etc. Very nice, even though I am not an expert.
Быстро или медленно это не важно, важно это качество товара.
My daddy worked at the sawmill, down at the planer mill for an old boy named Dixon. Old man Dixon was a very cruel fellow. Didn’t treat his employees well or pay them much of a wage. Didn’t pay my daddy too much of a wage. Just barely enough to get by, I reckon. I reckon he got by all right. But old man Dixon he had a boy name of Jesse Dixon. Jesse was more cruel than his daddy was. He used to make quite a bit of sport of me when I was down there at the schoolhouse.
Best saw Mill 😍😍😍
Пилорама - это тема. Леса у нас много. Все при работе будут.
Лес уже весь попилили, скоро одни пеньки останутся
Вот это станочек все себе такой соберу полюбому!!!
Будто с другой планеты ))
Лазер это хорошо, а вот скорость реза маленькая, торцовку можно и автоматизировать, как в прочем и подачу в обрез.
к тому же струя опилок летит обрезчику в еблет (6.23),,стоит труба для подключения техпылесоса но его нет и скорей всего не будет а ето значит за смену там камаз опилок придётся уберать руками и тачками вывозить на улицу..зато всем выдали комбезы новые которые после видео отберут..и оператору нахуя перчатки кнопки тыцкать..ещё бы шубенки выдали
Думаю в Европе его цена уже не кажется заоблачной, плюс государство даёт кредит почти без процентов. Почему бы не поработать с удовольствием.
Сколько он стоит боюсь даже представить сколько лет надо что бы он окупился правнуки еще работать будут
These guys are really in no hurry to wood out of the mill. To get an order filled must take years.
Hi Buddy, You sent me a price and I cannot find it, I have been battling in court with the town because they are refusing a permit to build another Building for this machine, for me I cannot understand because I have 106 acres and they are screaming this is on the ocean and not for development for industries, so as we fight, this virus has come up and now 3/4 of the town is out of work and lost their jobs so this may be a game changer for me, I wanted to tell you your shipping prices for each container were very expensive and some where the numbers had to come down, we will see as we have another court date in the beginning of August so who knows what is going to come down at that meeting but I know the men in town are making with the comments toward the town so this is a good thing!
If I have acres pine trees, can you buy it ?
Читаю комментарии русскоговорящих пользователей и рука сама тянется к лицу...господа, ясно же что данный ролик это исключительно демонстрация станков, а не работающего предприятия. Реклама грубо говоря. К чему придирки о скорости работы и рентабельности, само собой если пилить ель или сосну и отпускать по внутренним оптовым ценам нет смысла думать о покупке такого оборудования. Стыдно должно быть за такую токсичность товарищи!
А ничего кроме роспуска это недоразумение и не умеет, посему затраты на приобретение сего чудо девайса, деньги на ветер.
Why this company never display the price of the machine.
А у нас ножал кнопку и лоб мокрый.🤩🤑
Damn fine looking lumber
They also had a young boy working in there
There you go! Put that kid to work! There will be time for video games once your old.
Better have a steady supply of work for this unit so you can make the investment worthwhile 💰
Don't like music, but the machine works well.
Похоже, что на месте распиливают сухостойный бук с "пороками" древесины для изготовления мебели. Дорогой материал, наверное.
С трудом представляю как такой монстр может окупиться ....
А ремонтировать то .... !!!!
Так у них и работяги нормально получают !
Very good job,
Cant beat a traditional carriage.
Overkill. I wonder what that machine costs? One limp log at a time?
To je pila!!!
How Much is this setup as we see it!
damn that was painfully slow
yes i like this ua-cam.com/video/_qT9J_8MIaA/v-deo.html
@@ubaidtareen8289 the machine you like is a different type, in that one you have to make several process manually.
Bienvenidos al siglo XXI, toda empresa que se dedique a la Fabricación en madera debería tener una de estas para evitar el despilfarro de la materia prima
jorge torres , estoy de acuerdo contigo en cuanto a evitar el despilfarro de madera, pero no veo en este video algo significativo en ese tema, saludos.
So if someone actually purchases this machine with all of the automation it has he has to have someone standing there to cut the boards to length and another person to properly feed it into the planer.. You lost me after I saw that.
1000 кубов в месяц давали на Виммере.Это тоже ничего станочек.
can i import this mechine?
Muito bom 👍👍👍
Beautiful!
Nice machine, but you can tell these guys get paid by the hour and not the linear foot they produce.
so nice video
benditas maquinas..muy buenas.desgraciadamente le quitaron el trabajo a mucha gente. eso es lo malo
Great job, neighbors.
Quite slow, for its massive size. But impressive machine..
Maybe it is in test mode-looks like it is in the production facility..:! greetings from Austria,cheers!
nice outfits on the 3,5 staff but that´s all positive i have too say. Sorry
Price ??
Número de telefone pra contato do vendedor da maquina quero fala com o responsavel
อนุโมทนาสาธุด้วยนะค่ะ
I want you to build me a fully automatic machine that doesn't need any labor to operate ... A machine that will load the logs, cut, trim, plane, sand & store without any human interference ... Can you ?
สุดยอดมากๆครับ
Price this machin
Mantapp
Salam dari indonesia papua
A lot of human (and a kid) interaction for such machine.
Мир сошел с ума,
price?
All you need is 250k and 4 college degrees and you're all set. The terrible music is free.
Price in india?
Сколько этому рамщику платят за куб ?
больше чем тебе за год.. и он не рамщик.
Price for all?
Смотришь, и такое ощущение как будто космический корабль к взлету готовят, а не пилораму запускают))
Оборудование красиво выглядит,но штука абсолютно не рентабельна при таком количестве работников и малой скорости обработки.. Деньги на ветер...Хотя можно использовать ,если нужно чем-то занять пенсионеров (как подработка).
Зато качество! Доска к досочке! А не как в России напилить кривой хуйни да побольше, всеравно же купят ведь выбора то нет !
How much many dollars
Хуйня это все! Мы с Витьком их норму до обеда выполняем, а после обеда как вмажем еще столько же!!
So… you put a pecker pole on that thing for a demo…? And the soundtrack…
All the cheesy theatrics aside, pretty awesome
Those workers look really bored. So much automation! Impressive, though.
Пацан больше всех двигается)
Хотелось бы знать сколько вообще этому пацану лет
Очень очень долго будет окупаться это.......
окупаемость оборудования 30-35 лет ))
@@Fahrenheit20111
Не окупится никогда, поскольку за это время, это оборудование на обслуживании сожрёт ещё очень много средств.
Никогда не окупиться
Лес на пеньке стоит 500р.
Сухой лес 12% влажности стоит 35 000р . Объясните мне как он может не окупится за год? Сколько эта машина пилит кубов в две смены?
Wowww perfect machin
👏👏👏👍👍👍👍👍👍👍👍👍👍👍👍
I see several problems. One, it's big but it's slow by definition - you simply can't cut timber quickly with a band saw. Second, the operator rides the saw. Why? Why waste kilowatts of energy to transport 60-80kg back and forth all day? And third, all this "automation" will only get in the way. The only thing that MAY be necessary is electric drive for the saw frame, that's all. Everything else is just unnecessary toys that make the whole thing more expensive. You can easily move the boards through the mill on rollers (unless ALL your exmployees are 12-year-old boys). This is just a glorified wood-mizer.
Hello Maloy7800
I am in Africa and active into export of Rough Cut (some bark-on) square edged Hardwood logs. Now I like to venture into SPF softwood logs (similar sort). If you watch this video from 08.00 to 09.07 "making of Prism" you will know what I actually want to do. Not this much finished but some quick cuts which can turn a round into square edged. For this project, I selected British Columbia as the area is highly blessed with SPF and other types of wood species.
You seem to be an experienced person in saw-milling so I seek your advice for an economical hydraulic and semi fast sawmill through which I could manage to finish at least 2 - 3 / 20 Foot Container loads on daily basis. The size of such square logs can be starting from 8 x 8, 10 x 10 and onward with minimum length of 9 feet each.
What could be your choice of machine for this work ? Efficient with low maintenance, Productive and within decent price range. New or semi used. Thanks a lot.
Hello, Kboci Ghana, I'm not an expert in this area, so, unfortunately, I cannot help with this. Just one advice - don't buy Chinese!!! Good luck to you!
Hello Maloy 7800. Thanks. BIG NO to Chinese products. I hate em dude.
band saws are actually quite faster than a circle saw for sawing timber, less kerf= less resistance while in the cut. I generally feed 250- 300 ft/min on a 7' double cut.
Thanks Adam.
Yes, some one also indicated that Band Saw could be a better choice.
Can you advise me on venturing into mid size sawmill ? My plan is to make rough cut Pine and Spruce Logs primarily and afterward I may embark on standardized board lumbering. I need to know about best and optimum machinery in budget price plus the number of labor to be involved in making four to five 20 Foot containers per day. It will be rough cut square edged logs of 9 feet in length with some bark on at the edges of square or rectangular pieces. My email is : info@kbocl.com and I use whatsapp with my: +92 310 214 9796
Najam
Vary good machine
is there any video of this mill in place and actually producing, or just this painful corporate crap. Please stop it with the dramatic music, it's just a sawmill.
What does that cost about a million.
Почему так медленно ? ))) Я за это время куб доски раскрою !
who s music in this video ???????
Please
Whoa!
👍👍👍
perfektno
Aleksandar Durtanoski lo
For a operation this size this mill is way too slow. I was a sawyer for years and ran a headrig, 900 logs a day with half the man power. This is not a efficiently mill at all.
Ed Johnson Too many man not enough production.
Overkill
كام ثمن خط الانتاج
Автоматизация должна быть и в подаче на обрез и обрез, и лазерная мерка по длине-Этот станок уже устарел по логистике и автоматике ! На крупных заводах уже давно обрабатывают длинные и тяжёлые заготовки из кругляка и квадрата где сталь от марок Ст.3 - Ст.50ХМФ . Хотя-бы там бы скопировали техпроцесс и "мозги" !!!
300 Tihumeetrit päevas ?:-):-)
amazing
Id do all that on my own
very nice machine! I'm building a machine myself, see my last movie
В России намотало нашинковало бы половину рабочих в первую же смену.
Many machines, many human and very very slow.
wow nice
А где можно купить?
В Пятерочке )))
It's likes working in office
плохо продумана вся система, много ручного труда при такой механизации. человек на циркулярной пиле постоянно встаёт что бы дотянуться до ручки пилы. это самый большой пробел а по меньше можно при желании найти с десяток.
name of the music
Super
👍
Зачем там вообще нужны операторы?