With the front leaf spring mounting bolt on the passenger side, a lot of people (including me) cut it off and replace it with a new one. Nice video with heaps of detail. Well done.
What would be the go in wanting the front end of the car to sit higher then the back end. I’ve got stock suspension in now and my rear end is sitting relatively high. I do have an alloy bar on. Thinking about going 3inch front 2 inch rear but not sure.
I have a 2020 SR5 with a outback armour 2’ lift with no upper control arm change it’s still standard can I put 285/70/17 AT3 BF,s 17x9 rims(not sure what the offset should be) without it scraping… thanks
Nope. You'll scrape the guard near the door seal when turning on compression (with mud guard removed). My 275/70/17 and aftermarket UCA and castor adjustment just clears body mount. Not sure if 285/70/17 will clear body mount.
I@@photodriftI put the iron man upper control arm and 265/70/17 faicon wild peaks with a 50mm lift with ROH P12 offset and tyre sit level and not out of the guard.
Hey mate Yeah stoked with them. Only thing I would do different is get remote res. When going across Fraser on inland tracks was getting a bit rough when the shocks got hot
Watched this video about 10 times, finally fitted mine today so stoked. Definitely not as easy as you guys make it out to be😂
Hahaha, we do this everyday so probably why it’s a bit easier! But good on you for giving it a go! 🤙🏻
With the front leaf spring mounting bolt on the passenger side, a lot of people (including me) cut it off and replace it with a new one. Nice video with heaps of detail. Well done.
Thanks Steven!!
Yeah we cut the bolt with a air hacksaw, but thought we should suggest removing tank to avoid any issues with people damaging tank etc
Do you have a video of trimming your front bumper to avoid the tyres rubbing?
im keen to bring my hilux up see what we can do with it
Look forward to it!
What would be the go in wanting the front end of the car to sit higher then the back end. I’ve got stock suspension in now and my rear end is sitting relatively high. I do have an alloy bar on. Thinking about going 3inch front 2 inch rear but not sure.
Did u manage to get it dine? 3inc front n the 2inc rear.. what brand did u use?
@@harry-qy2fz Yea bro, 3 inch front, 2 inch rear dobinsons mra. Is perfect bro.
@@michaelkonidaris6902 what size tyre n rim did you use?
I have a 2020 SR5 with a outback armour 2’ lift with no upper control arm change it’s still standard can I put 285/70/17 AT3 BF,s 17x9 rims(not sure what the offset should be) without it scraping… thanks
Nope. You'll scrape the guard near the door seal when turning on compression (with mud guard removed). My 275/70/17 and aftermarket UCA and castor adjustment just clears body mount. Not sure if 285/70/17 will clear body mount.
I@@photodriftI put the iron man upper control arm and 265/70/17 faicon wild peaks with a 50mm lift with ROH P12 offset and tyre sit level and not out of the guard.
Hey guys, looking at changing my shocks to the radflo, how are you finding them now? Comfy ride on road?
Hey mate
Yeah stoked with them. Only thing I would do different is get remote res. When going across Fraser on inland tracks was getting a bit rough when the shocks got hot
@@procheckautomotivemechanic4551 thanks for getting back to me!
Not a problem 🤙🏻
Hey what offset wheels have you put on?
Did you guys have to do a body mount chop to clear the tyres? Or any guard mods?
Love the videos and build 🍻
Thanks Mate!!
Yeah body mount mod is done to clear the tyre
Other than that all factory
Is this height legal 🤔 did you have to get it approved and what size tires are you going 33s ?
The only place that can get a 3 to 4 inch ifs suspension lift certified is superior engineering, Pre rego.
Hey nice job.
Does anyone know if I can fit 285 7017 tyres on a 2021 rugged x without any modifications..
Thanks 👍🏻
You will have to do a body mount chop and trim or fold lower front guard in to fit unless you have a big lift
@@procheckautomotivemechanic4551 what do you mean by fold lower front guard ?
You can cut it or fold it in so tyre doesn’t hit it
@@procheckautomotivemechanic4551 2021 sr5, 4 inch lift clears a 285 with slight rubbing on the front rear mud gaurd, no cutting of the front at all.