Honestly as a CMS, this is a phenomenal insight into tilt-up construction... I've spent hours reading up on tilt-up and precast, and this 8 min video tied everything together so well. Thanks for putting this together!
Thank you for your video posting. It was amazingly fast how everyone had got the envelope together. Well, there's cooperative effort for you. Thank you again! IDEAS!!!!!
Man that's a beautiful job I used to work in Las Vegas Nevada for two different companies doing the same job you feel great being part of this kind of jobs
buen video de sistema constructivo. me gustaria saber que tipo de pruebas y ensayos se presentan en el control de calidad de este método de hormigón de antemano muchas gracias!
as otro video igual que este y nombralo asi "Warehouse Construction by Grupo Corporativo Jerplan S.A. de C.V." y mira como se duplica tu negocio en cuestion de nada!
Then my team and I (Sanders & Worhman) come after these guys and seal up the floor before the tilt tops even go up. After, we caulk the tilt top joints and also do the MM80 WHAT A LIFE!! Oh and we also do the retaining wall waterproofing
The "stick" is a steel post that is bolted to the wall and to the floor as a temporary brace. After all of the wall panels are connected together and the roof beams are connected, the braces can be removed.
They are safe until the fall down and kill a bunch of workers. We have had a number of accidents when the techniques were being developed but it seem they are oretty safe nowadays. Pretty much EVERY new commercial building in Australia is a tilt up, and some homes as well. I think they are ugly.
Patrick Whelan They used to form and pour full height decades ago, think about how much more lumber was used besides many other factors making it antiquated and slower process. And it is not better than this process. A tilt up house does the builder give the owner a hammer drill so they can hang pictures and curtains, lol.
Honestly as a CMS, this is a phenomenal insight into tilt-up construction... I've spent hours reading up on tilt-up and precast, and this 8 min video tied everything together so well. Thanks for putting this together!
Great video! How about part two with finishing the connection of the walls to the floor slab as well as pan roof?
great video, editing, music and shots! the best one I've seen mate - well done! thanks for sharing!
Learn something new everyday. Pretty cool. Always thought the wall panels were delivered.
Thank you for your video posting. It was amazingly fast how everyone had got the envelope together. Well, there's cooperative effort for you. Thank you again! IDEAS!!!!!
Man that's a beautiful job I used to work in Las Vegas Nevada for two different companies doing the same job you feel great being part of this kind of jobs
It’s cool I do this in Cali. Carpenters union local 213, the pay needs to go up tho like the high rise workers or freeway.
Great editing, love the tilt-shift effect in some parts.
for a residential construction can we put exterior cladding like Marble or limestone during the panel making?
after
Idk what they get paid but I’m sure it’s still not enough they need 2xs whatever their current pay is.
How much do the panels weigh? Whats the cranes capacity?
buen video de sistema constructivo.
me gustaria saber que tipo de pruebas y ensayos se presentan en el control de calidad de este método de hormigón
de antemano muchas gracias!
Los paneles son de concreto celular ?
memang kene banyak buat video camni lepas ni, function. Terbaik
Ese sistema de construcion es bien seguro yo soy esperto ese sistema
Can someone tell me what is the name of the lifting device which puts the walls vertically? I would like to buy one.
Crawler crane?
Is the floor completely finished before the walls go up or do you finalize the floor afterwards?
as common sense dictates. final finishing of all finishes is in the later stage.
Nice 👍👍
Yo dijo que deberían de ganar más los que levantan los panos.. porque es muy difícil
as otro video igual que este y nombralo asi "Warehouse Construction by Grupo Corporativo Jerplan S.A. de C.V." y mira como se duplica tu negocio en cuestion de nada!
Wow! They work fast!
Super video
Then my team and I (Sanders & Worhman) come after these guys and seal up the floor before the tilt tops even go up. After, we caulk the tilt top joints and also do the MM80
WHAT A LIFE!!
Oh and we also do the retaining wall waterproofing
I wonder how much a panel weighs ?
incredible that was amazing thank you
Where are you guys located
Lord! Let's hope we never run out of the materials needed to make concrete.
Awesome
Pump up the jam pump it up!!
That was amazing 😲😲
awesome video great editing
How do the walls remain staying up, one side stick pushing up is good enough?
The "stick" is a steel post that is bolted to the wall and to the floor as a temporary brace. After all of the wall panels are connected together and the roof beams are connected, the braces can be removed.
Good job guys!!!!
why a tilt up wall rather than poured vertically? are they just as safe/ I see a lot in Florida and was always wondering.
They are safe until the fall down and kill a bunch of workers. We have had a number of accidents when the techniques were being developed but it seem they are oretty safe nowadays. Pretty much EVERY new commercial building in Australia is a tilt up, and some homes as well. I think they are ugly.
Patrick Whelan They used to form and pour full height decades ago, think about how much more lumber was used besides many other factors making it antiquated and slower process. And it is not better than this process. A tilt up house does the builder give the owner a hammer drill so they can hang pictures and curtains, lol.
Good job
I've seen enough. Who is ready to start a construction company? J/k
Why do they wash off panel?
A release agent is used during the pour so it doesn't stick to the slab and the other panels, this needs to be washed off.
factory slabs are so much better. why do this on site?
Factory process is pretty much similar. They save a lot on logistics - the supply chain is much shorter.
PARVUO
Sweet video
Как все просто со стороны.)))
В европе строите? Potete construire in Europa? Can u construct in Europe
Increible
Subriber belum 1000 kok udah ada iklannya ya ini video udah dua tahun upload, mungkin udah gk di urus lagi akaunnya ama yg punya
The music made me want to die but cool video
That's how we do it
Hi, I'm a mechanic, welder, could you give me a job, please, I'm from El Salvador, in the name of God, help me.
weldron ko kuty bhi nai puchty
Nelson Antonio Sibrian Romero fuck you itch stay in your country we don’t want you here plus this isn’t for people with no education
@@robertdawg4754 how bout you switch spots with him? You will own that country. You are educated!
good,,,,,,
Great job
hello sir , precast work i some experience i need job sealant applicatot... any vacancy
The piece of junk unsafe PH crane is to small wheels coming of the ground at 5:14
Don't be stupid all cranes have hydraulics levelers so the tires Dont get damage by the weight while lifting. Plus gives the crane more support
Yo soy hago todo eso es fácil es una caja
Terrassement d'un terrain en pente : ua-cam.com/video/jKPZAHe0_fQ/v-deo.html
Number 531 me 2115 for
Pop99[IPO] ]