9:19 i have a following issue right there, brown parts are not as close to the grey parts thus they’re not moving, im really stuck here since i rebuilt it a few times already, i dont know what to do ;(
Definitely you've done a mistake at the engine, you have to rebuild it, try one more time but slowly, do not hurry, try to slow down the video speed, too see more detailed view of each piece installed
4:21 im stuck on adding that double hole joint on , it doesnt seem to fit the blue when i added it onto the black beforehand...anyone know how to fix this
33:44 this part it seems that I do not have the piece 21 black colored one, also in the book it said it only provided 4 pieces, I’ve used it in the other parts of the car now what should I do?
At 23:00 can somebody explain what to do? Because I built that part but I cant make it stuck with the blue part because there's too much distance between the pieces
The engine....the ine with brown rods, in the vid it was bent inside...the one i just noticed is not bent...would it affect while completing it and how should i repair it( im on end of 2nd packet now)
Bro, if you have still troubles, take some pics with your problem and send them to my Facebook or Instagram profile, and I will look closer to your problem 😉
for some reason when i use the thing to move the engine the part on the bottom that makes it move doesnt touch the engine itself, is there a reason for this?
I'm no stuck on bag 4 the long black 3 connectors with 2 Small red bits and the spanner looking hands don't fit in the holes if I put it in one of them it won't reach the other one
Thank you very much. I could understand why i have pieces left after bag 1 and this is the first i see someone showing the same leftovers after bag 1. However you have a leftover red piece 6378120 and i used all of mine. Hopefully its not important later. i double and triple checked the instructions on the app and the book and pretty got all the pieces in the right place.
Honestly there is problem with my both Bugatti Bolide versions, the yellow one and blue, my cylinders get stuck sometimes when wheels are spin, I suppose it's a design problem...
Confirmed. I just bought a blue one and the engine just gets stuck on half the engine turn... I rebuild the engine 3 times and it just doesn't want to turn... For some reason the crankshaft is getting jammed in the "engine block"
@@TopBrickBuilder At 25:12, once you are done building that side panel and are fitting it in to the back portion of the car, for me it is not linning up on the 2 ends where is snaps in and I am not sure why.
Bro I actually need help I don’t want to redo it so basically my engine is good but the thing that spins and makes it move with the back tires is upside down and is making my car not being able to move can you pls help
How do you have almost 500K subs but only getting 1K views? I’m just curious bc it don’t make sense lol. I like your videos by the way too!! Keep it up!!
Thank you man! The main problem is my auditory, mostly of them have subscribed to another content, on this channel wasn't always a LEGO content, so I hope with time the audience will switch to the right one, I hope this content will be useful for many 🤗
@@TopBrickBuilder Okay, yeah that makes sense now. Keep doing what you’re doing and hopefully they will. Your videos are great!! Just keep grinding. I really like your thumbnails. Where do you get the picture of what you’re building from on all your builds? It looks so clean. Very eye popping.
Thanks dude. So I'm trying to find the best official picture with right angle and I'm cropping it, and after that adding specific to theme colour the background, and then the text.
Ok gotcha!! They look great. And thanks for replying back to me. Like what websites do you find all the stock pictures from? Like Amazon,Target or Walmart. I was just wondering if anybody can use those pictures without getting a copyright strike as long as you crop it or something. Thanks!!
Hmm my car doesn’t run when I push it, the gears? In the back get in the way, it was a lot of hrs to build to deconstruct again 🙃 very helpful video when I got stuck on a part
This could be the engine problem too, the cylinders can stuck and doesn't let the wheels to spin. Mine isn't ride smooth as well, the Yellow version was better designed, these two versions are slightly different in building process.
9:19 i have a following issue right there, brown parts are not as close to the grey parts thus they’re not moving, im really stuck here since i rebuilt it a few times already, i dont know what to do ;(
Definitely you've done a mistake at the engine, you have to rebuild it, try one more time but slowly, do not hurry, try to slow down the video speed, too see more detailed view of each piece installed
I can not figure the part when you connect the part next to the engine 22:39 22:39 22:39
Hey, have you figured out or you still need my help?
4:21 im stuck on adding that double hole joint on , it doesnt seem to fit the blue when i added it onto the black beforehand...anyone know how to fix this
Try to push the top of that 2 pins, and install in the same time the joint
thank you
@@TopBrickBuilder
This helped you?
I’m stuck with the black part it doesn’t reach I need help 23:25
Try to push it with your desk help, push it with more power
@@TopBrickBuilderThank you so much
Did my advice helped you?
At 20:20 for some reason I can’t seem to attach both pieces together, you cut it out you putting it together?
What do you mean? Just fits in the + hole both
I have the same problem
@@TopBrickBuilderit doesn’t for me
Can you make some pics with your problem and send them on my Instagram, Facebook or Discord so I will take closer to your problem?
33:44 this part it seems that I do not have the piece 21 black colored one, also in the book it said it only provided 4 pieces, I’ve used it in the other parts of the car now what should I do?
Seems like you've used it somewhere where you shouldn't
22:15 i need help how do u fit the pieces together its not working
Have to figured it out yet? I’m struggling on that part too
@ BRO I FIGUERD IT OUT
@Iggbog6191how
@Iggbog6191how
@Iggbog6191how
22:40 for some reason when I try to put that part in it just doesn’t reach and I’ve rebuilt it and checked over multiple times so what is the problem
If it doesn't reach, usually the problem is with back wing builded wrong, check it firstly
@@TopBrickBuilder you were correct and I just finished the car Ty
Thanks great! Glad for you 😌 What's your next project? 🤔
I have same problem... i dont find what is problem.......😂😂
@@jamesandy5942 they was right it has to do with the the back where the red lights are I had to rebuild I don’t know if you’ll have to tho😬
I’m stuck on 33:52 it’s too large to put the thing in
Hey, have you figured out or you still need my help?
Not any nore
Glad for you ❤️
hi please help me, I can't fit these parts 11:21
Wow, have you checked very well? These are small parts, smallest light gray pieces
At 23:00 can somebody explain what to do? Because I built that part but I cant make it stuck with the blue part because there's too much distance between the pieces
That's because you've made a mistake at lower part of the body, black part, so try to rebuild it, or check if you've make it right
Super h me ot and helped me out when i was stuck! thanks for this!
Glad it helped! Thank you too for your feedback!
I have a problem with the w16 engine 8:05 on the video
What problem do you have? Can you specify so I could know how to help you 🤗
@@TopBrickBuilderman the rods aren't connecting
@aaravsajii3705 Hey, have you figured out or you still need my help?
@@TopBrickBuilder yea figured it out
Sounds great 👍
have a good day
Thank you a lot! You too!
The engine....the ine with brown rods, in the vid it was bent inside...the one i just noticed is not bent...would it affect while completing it and how should i repair it( im on end of 2nd packet now)
Plss help me 😭
Well, it depends, if the engine runs smoothly then there is no any problem 😉
The connection at 23:37 has top much distance.. can someone explain please?
Are you sure that you have used the right black bars?
@@TopBrickBuilderyes i tried twice
Try to slow down the video speed and try again, do not hurry with this part
@@TopBrickBuilder bro is in no way any help
What do you mean? What problem do you have?
I for the life of me cannot figure out what I'm doing wrong at 22:20
Try to slow down the video speed and watch more carefully how to build it right
@@TopBrickBuilderstill no fucking help
At what step you are or moment in video
@TopBrickBuilder I've also tried slowing the video down and it hasn't helped, on step 176
Bro, if you have still troubles, take some pics with your problem and send them to my Facebook or Instagram profile, and I will look closer to your problem 😉
for some reason when i use the thing to move the engine the part on the bottom that makes it move doesnt touch the engine itself, is there a reason for this?
For sure you've made a mistake when you have built the engine, you have to check it
I'm no stuck on bag 4 the long black 3 connectors with 2 Small red bits and the spanner looking hands don't fit in the holes if I put it in one of them it won't reach the other one
Well, that's weird, can you take some pics and send them to me on Instagram or Facebook? I will take a closer look to your problem
At 21:21 you put the cover piece on that other piece but for me it doesn’t seem physically possible, can you try to help?
22:21*
You have to align the black pieces to easily install the + black pin. Is that the step that you have problems with?
@@TopBrickBuilder no, the part right before that, specifically step 175 where you snap the black tube piece to the whole on the cover piece
That black pin goes in the hole of that cover, there is just one hole, try it.
It's not happening
At page 77 the last bit in the top bubble I don’t have the middle pice it diddent come with it can you help me please
If you don't have a piece, you have to ask it in your local LEGO store 🥺
15:07 mine wont go in fully can any1 help?
Try to shake that red bar, or to take apart and try one more time to install it, it should be installed smoothly
I am having an issue with the pistons not moving when i put the crank shaft on?
Bro, just follow my video, test it like in my video, be sure that everything works
Try to slow down the video speed at x0.25 and you will see a black + pin where you can fit this back wing
Awesome 👌
Thank you very much. I could understand why i have pieces left after bag 1 and this is the first i see someone showing the same leftovers after bag 1. However you have a leftover red piece 6378120 and i used all of mine. Hopefully its not important later. i double and triple checked the instructions on the app and the book and pretty got all the pieces in the right place.
Glad that you have found your answer in my video 👍 Pieces leftover could be different in some sets, so don't worry about that 😉
Thank you for showing Me!
No problem! Glad to help! ✌️
Thank. You
Your welcome!
Thank u so much
Most welcome 😊
it’s been 10 hours of building how long should it take me?
It doesn't matter, the most important is to finish it well
Wow thank you for the help❤
My pleasure 🙏 Thanks for feedback 😀
How to get stickers on on good?
Just do not hurry, take your time 💋
I follow your exactly instruction but my engine still jammed when pushing the wheel, I'm gonna do it one last time today before giving up lol
Honestly there is problem with my both Bugatti Bolide versions, the yellow one and blue, my cylinders get stuck sometimes when wheels are spin, I suppose it's a design problem...
Confirmed. I just bought a blue one and the engine just gets stuck on half the engine turn... I rebuild the engine 3 times and it just doesn't want to turn... For some reason the crankshaft is getting jammed in the "engine block"
@gin2512 Exactly 😭
great help thanks!
Glad it helped! 😎
I need some help out my lego isn't fitting right and I am sure that I did everything right
At what step? Time?
@@TopBrickBuilder At 25:12, once you are done building that side panel and are fitting it in to the back portion of the car, for me it is not linning up on the 2 ends where is snaps in and I am not sure why.
Try to rebuild the side pannel, that's the common mistake for mostly
thanks you helped alot but i'm js now realizing i made a mistake at the very beginning with the engine and i'm done what do i do😭
Thank you too! If you made a mistake at the engine unfortunately you have to disassemble almost all your confection to have access to the engine... 😭
why can’t my brown parts from the engine hit the triangles??
It's only because you've made a mistake, check carefully every step
Me sobraron piezas en la bolsa uno es normal son de las que vienen en sobres
Sí, es normal que queden algunos trozos.
@@TopBrickBuilder Gracias
Bro I actually need help I don’t want to redo it so basically my engine is good but the thing that spins and makes it move with the back tires is upside down and is making my car not being able to move can you pls help
Can you write me the moment in video or step that you are talking about?
It’s at 8:04, I accidentally put the spinner facing the other way and not moving the engine
Unfortunately you can't make it to move without disassembling and change it to the right position 😕
Aw man ok thanks for trying to help tho
Take care 🙂
I’m d building a yellow one
Both looks gorgeous, I have that one too on my channel
30:23
It's your timestamp?
Super satisfying and helped me out when i was stuck! thanks for this!
Glad it helped! Please press Thanks button to help me too if you can 👍
@@TopBrickBuilderDone!
Thank you a lot 🥰
Yo I messed something up because it can’t drive because of the engine touching the ground
Oh, seems like you've made a mistake from the beginning when you have installed the engine to the frame
How do you have almost 500K subs but only getting 1K views? I’m just curious bc it don’t make sense lol. I like your videos by the way too!! Keep it up!!
Thank you man! The main problem is my auditory, mostly of them have subscribed to another content, on this channel wasn't always a LEGO content, so I hope with time the audience will switch to the right one, I hope this content will be useful for many 🤗
@@TopBrickBuilder Okay, yeah that makes sense now. Keep doing what you’re doing and hopefully they will. Your videos are great!! Just keep grinding. I really like your thumbnails. Where do you get the picture of what you’re building from on all your builds? It looks so clean. Very eye popping.
Thanks dude. So I'm trying to find the best official picture with right angle and I'm cropping it, and after that adding specific to theme colour the background, and then the text.
Ok gotcha!! They look great. And thanks for replying back to me. Like what websites do you find all the stock pictures from? Like Amazon,Target or Walmart. I was just wondering if anybody can use those pictures without getting a copyright strike as long as you crop it or something. Thanks!!
From Google, just searching them on different websites, where the pictures are higher quality 🤔
How much does it cost?
It's $50 on official LEGO Store
@@TopBrickBuilder oh thats expensive
It's the same price as Yellow version 💛
Oh
Which one do you like? Blue or Yellow version?
Hmm my car doesn’t run when I push it, the gears? In the back get in the way, it was a lot of hrs to build to deconstruct again 🙃 very helpful video when I got stuck on a part
Could be, but if you hold the car in hands, wheels are spinning?
@@TopBrickBuilder only the front ones spin the back they jam up when I try to spin them all the way
This could be the engine problem too, the cylinders can stuck and doesn't let the wheels to spin. Mine isn't ride smooth as well, the Yellow version was better designed, these two versions are slightly different in building process.
Mine works on a treadmill 🙃
Interesting! 🤣
The brown lever part was the hardest
For others the engine, but for you the lever part, but the most important thing is that you have figured out and finished the confection! Congrats ✌️
@@TopBrickBuilder sorry, i meant im still doing it and its still really hard ive done it 5 times
I see, do you have some problems now with building?
@@TopBrickBuilder it only when i connect the pieced together it doesn’t look like the pic then i add it to the main car
At what step?
Seamana cu 42151
E exact la fel, doar că altă culoare
Fiul meu il are dar pe cel galben
Fain! Pe cel albastru nu îl vrea? 😊
Pai i-am spus ca daca il are pe cel galben e suficient
Corect 🙃
SLOW DOWN
You can change the Playback Speed in UA-cam settings 👌