love you video!! i hope you will continous to show us more to repair leshliy 2.it will be great to have more information about all springs size..it will be easier for end users to find them on their local store
How’s it going Brian now I’m not 100% sure on this but after 3 times opening my valve trying to fix a slight air leak, first attempt I cleaned it up nice looking for any debris, relubed. Same problem, 2nd attemp I changed out the o-ring under the white delrin Valve cone, problem persisted. 3rd attempt and something you didn’t touch on is the oring under the brass valve housing. After figuring out a safe was to pull the brass out which I did with a piece of paracord weaved through two adjacent holes. Popped out replaced the oring , buffed my brass to a shine and viola! No more “psssss” 25cal I’m amazed with the consistency of the system . So any reasons why maybe to leave that alone. Thank you for your hard work.
I have them. It’s pretty rare you’ll ever need them. The pout of the video wasn’t to raise concern about the parts but instead just show the gun is really simple and easy to service
Hi could i ask sorry this is not about what you was doing as that's not in my question what i am trying to find out is about hinge pins do you get any movement from them when the rifle is open or shut as i am trying to find out if this is normal Great vid by the way ATB
What does that retaining ball actually do? Is it only to prevent the valve from moving and if so, why is that retaining bal made of rubber? Thanks, this is an awesome gun.
I ordered the leshiy 2 in a .22. If I want to go to a .30 can I just buy a .30 barrel and swap it or do I need some sort of adapter I would need to buy also?
You will need a new magazine and that’s all speaking of parts. Then you’ll need to tune your valve pressure to adjust it to a proper setting for .30 cal. After that, you can tweak your tune with the diameter of the nozzle jets to adjust the valve dwell time (sold separately).
Hi edgun west, am Ronald khang I wished to know that if I like this edgun Leshiy2 .25 cal. 450 long range, is it hight power..? or not and how much she cost me..? Is it ok u let me know..? Thanks.
I am an aerospace engineer and know enough about fluidic valve systems to be dangerous. With that said, I would think changing the mass of that ball from plastic to steel would cause a problem to the delicate operation of the valve. Did you notice any difference in performance?
Good question. In the past I have changed valves from plastic to different types of metals. Changing mass of the valve resulted in changing the valve dwell time. Leshiy 2 valve ball the mass differential was minimal and pressure is relieved after each opening so the mass of the valve is not as big of a factor as a traditional poppet / hammer airgun. So in short no difference in performance or extreme spread of the projectile.
I am guessing that all this information is for maybe in the future use. I have over 3 thousand pellets with my Leshiy Classic, with no problems. And it still stacks pellets at 10 meters. And I am approaching 500 pellets with my Leshiy 2, and still no problems. All information is good,, even if you never have to use it.
@@willybee3056 sometimes guys take things apart on accident. This actually prompted this video Most videos I make are because one person asked me how to put something back together. It’s easier to just make a video and share it with the world
Great informative video Brian. Thats why your the guy to buy EDGUNS from buddy.
Deposit made and counting the days until my Leshy 2 Long gets here. Very happy that you provide these videos.
love you video!! i hope you will continous to show us more to repair leshliy 2.it will be great to have more information about all springs size..it will be easier for end users to find them on their local store
great video,i was always wondering how is the valve work on leshy..
How’s it going Brian now I’m not 100% sure on this but after 3 times opening my valve trying to fix a slight air leak, first attempt I cleaned it up nice looking for any debris, relubed. Same problem, 2nd attemp I changed out the o-ring under the white delrin Valve cone, problem persisted. 3rd attempt and something you didn’t touch on is the oring under the brass valve housing. After figuring out a safe was to pull the brass out which I did with a piece of paracord weaved through two adjacent holes. Popped out replaced the oring , buffed my brass to a shine and viola! No more “psssss” 25cal I’m amazed with the consistency of the system . So any reasons why maybe to leave that alone. Thank you for your hard work.
I hope you'll offer those parts ( balls and any O-rings necessary) on your shop at some point. Thanks for the detailed, well explained vids !!
I have them. It’s pretty rare you’ll ever need them. The pout of the video wasn’t to raise concern about the parts but instead just show the gun is really simple and easy to service
Great and informative video
Mantap jooosshh..lanjutkan bossskuu
Thnks for this video,and than magazine mecanisme for edgun please
Edgun sells the steel ball instead of the plastic one???
I would like to see a video on how to and when to clean your gun.
Ok I’ll make one ☝️
Or how can i get the oem tiny ball replacement?
How can i get that steel ball valve replacement?
The ball in the valve is bad in my .25 shorty. What type of replacement ball should I source to replace it with?
Hi could i ask sorry this is not about what you was doing as that's not in my question what i am trying to find out is about hinge pins do you get any movement from them when the rifle is open or shut as i am trying to find out if this is normal Great vid by the way ATB
What does that retaining ball actually do? Is it only to prevent the valve from moving and if so, why is that retaining bal made of rubber? Thanks, this is an awesome gun.
It keeps the valve pin in place. Correct positioning ensures it will always touch the trigger arm. It’s made of acrylic for light weight
I ordered the leshiy 2 in a .22. If I want to go to a .30 can I just buy a .30 barrel and swap it or do I need some sort of adapter I would need to buy also?
You will need a new magazine and that’s all speaking of parts. Then you’ll need to tune your valve pressure to adjust it to a proper setting for .30 cal. After that, you can tweak your tune with the diameter of the nozzle jets to adjust the valve dwell time (sold separately).
Hi edgun west, am Ronald khang I wished to know that if I like this edgun Leshiy2 .25 cal. 450 long range, is it hight power..? or not and how much she cost me..? Is it ok u let me know..? Thanks.
Hey my freind hru i have an air leak between the air tank and the regulator valve i change the oring but i still lose aire
I am an aerospace engineer and know enough about fluidic valve systems to be dangerous. With that said, I would think changing the mass of that ball from plastic to steel would cause a problem to the delicate operation of the valve. Did you notice any difference in performance?
Good question. In the past I have changed valves from plastic to different types of metals. Changing mass of the valve resulted in changing the valve dwell time. Leshiy 2 valve ball the mass differential was minimal and pressure is relieved after each opening so the mass of the valve is not as big of a factor as a traditional poppet / hammer airgun. So in short no difference in performance or extreme spread of the projectile.
At 07:04 you say "make sure it has spring action" : I guess it is sideway ?
perpendicular
What kind of ball or type 😊can be used to replace the one current valve
2.0MM CERAMIC SILICON NITRIDE BALLS
How much lenshy 2
How many foot pounds is this gun
I hope I never have to fix mine.
I am guessing that all this information is for maybe in the future use.
I have over 3 thousand pellets with my Leshiy Classic, with no problems. And it still stacks pellets at 10 meters.
And I am approaching 500 pellets with my Leshiy 2, and still no problems.
All information is good,, even if you never have to use it.
@@willybee3056 sometimes guys take things apart on accident. This actually prompted this video Most videos I make are because one person asked me how to put something back together. It’s easier to just make a video and share it with the world
Hello
hallo...why don't you send my order
Why are you using a great big adjustable spanner to remove those tiny brass valves? use a 5mm spanner or socket.