1954 Chevy 3600 Starting Issues

Поділитися
Вставка
  • Опубліковано 16 вер 2024
  • A series of tests run once a new/refurbished starter motor has been installed.

КОМЕНТАРІ • 13

  • @seanwalsh396
    @seanwalsh396 Місяць тому

    Needs a set of brushes in the starter..mine 54 has a 6 volt starter and running 12 volt..ran for yrs with 12 volt nonproblems

  • @Iamlightspeed
    @Iamlightspeed 2 роки тому +4

    Possibly a 12v starter motor on a 6v battery? Might be enough voltage to spin the motor up but not enough juice to crank the engine. Just one possible guess.

  • @javitee2944
    @javitee2944 3 місяці тому

    Starter needs to be rebuilt

  • @cassfracassi7825
    @cassfracassi7825 Рік тому

    Maybe you need spacer plates between starter and flywheel. Sounds like starter is going to far in and jamming...👍

  • @rev.kenshostad2888
    @rev.kenshostad2888 Рік тому

    If your starter is loose would that not remove the Neg. as the starter is grounded by the bolts being tight??
    I would try to ground the starter and try again...

  • @mrliberty8468
    @mrliberty8468 Рік тому

    That ground looks weird and that cable dia looks small..

  • @davidsaucedo717
    @davidsaucedo717 Рік тому

    Solenoid?

  • @mrliberty8468
    @mrliberty8468 Рік тому +1

    Grease your doors.

    • @seanwalsh396
      @seanwalsh396 Місяць тому

      Its the clutch peddle squekin ..mine does the same thing

  • @connorloftis4236
    @connorloftis4236 3 роки тому +1

    Ever figure it out?

    • @cougarwalker9320
      @cougarwalker9320 3 роки тому +2

      I'm having the same problem I'm curious if this guy ever figured it out

    • @dakotalunceford711
      @dakotalunceford711 Рік тому

      I'm having the same problem as well on my 59 viking. I replaced the switch on the starter and still nothing. It was working fine one day then the next nothing........??????

    • @26dbman
      @26dbman Рік тому

      Anyone ever figure this out. I'm having the same problem on my 50 chevy 3100 with the 216.