Це відео не доступне.
Перепрошуємо.
Refine your prints with CURA
Вставка
- Опубліковано 15 сер 2024
- Have you ever wondered how you can get better prints in Cura? Well today I'm going to show you how with some tips from San Tube.
A link to San Tube's video:
• Cura Profile & Setup F...
3DNG Vintage Spider-Man
www.thingivers...
Resources:
You can now help the channel with Buy Me A Coffee @
www.buymeacoff...
Consider supporting my efforts to bring you Entertaining and Educational content by using my Patreon link:
/ thefirstlayer
FACEBOOK GROUP - I do 2 Facebook Live Streams on this page each week. / thefirstlayer
Richard Cleveland on Social Media:
UA-cam: / mrrichard6440
Instagram: / cleveland_iam
Facebook: / richard.cleveland1
Twitter: / cleveland_iam
Website: richardclevelan...
Thanks to:
Spool3d @ www.spool3d.ca
Want to send me something for Mail Monday?
The First Layer
#230, 11929 - 40th Street SE
Calgary, AB
T2Z 4M8
--------Cameras and Gear Used To Shoot This Video ------
My Live Streaming Setup
COMING SOON
This VIDEO was EDITED with Adobe Premiere on a PC.
This Live Stream is streamed using vMix HD and sent out using Restream.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
"Funkorama" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons....
Love this. It would be nice if you did another more detailed as to why you are making or not making each selection. For us newbies.
Hi! As much as I appreciate you going to the trouble of making this video, I have to say that I wasn't learning much. You told us what to put in each box, with little or no explanation as to why we should do that. What do all these terms mean? What effect do they have? I'm trying to learn how the settings affect my prints, not simply enter figures blindly, not know why we're using that particular setting. It would be better split into several videos, with a more detailed explanation of each setting. Regards, Pat Lawless
That's because as he said, he got the info from Santube, in which case he should have done the right thing and sent everyone to Santube. I learned 90% of what I know from that guy, he knows what he's talking about when it comes to the CR10
That would be because it says REFINE your settings not learn how to 3D print.
Did you see chep has a video out that you can adjust infill in specific areas? So 100% in one area and 20% in another! Amazing!!!!!
Yes, the CHEP videos are the best. He also has some Cura settings that really make a difference.
John Meyer x z see
Can you please post that cura profile here? Thanks for the video.
Can please share, The setings, in a file for simple download it
Very Detailed, great job bud!
You've got the best channel for CR10 printing hands down! Thanks for saving me so many of the headaches I hear about from other users.
Why are you only printing at 27.5 mm/s? How much does it cost you to keep that bed at 60°C for 25 hours?
Love this Video, Couple Questions if u don't mind. How do you do the minus in the move section? and also, I am very New to the 3d printing, basically I have no idea what I'm doing lol, do I use all the settings that u provided in this video for all the things I print? sorry as I said I have no idea lol, Just another question, I have a Ender 3 pro, it seems every time I try to print something, it starts printing on the left hand side, instead of the middle, anything I need to ajust in settings? etc.
Hi can i use these setting in cura 3.4.1 for my CR 10 S4 is this ok
THANKS Rich
how do you move the camera around the part when in Prepare mode? I have tried holding down the mouse buttons but can't figure this out and it is driving me crazy
I have found my right mouse button is broken, I'm going to treat myself to a new mouse!
Why is outer wall half speed while inner wall is full speed? I have issues with small circles adhesion.
Because the outer wall is what shows, nice and slow on that, and bat shit crazy for the infill that you won't see if it gets sloppy.
Hi Richard. I love your settings and i'm getting Amazing results. Could you please tell me what changes you would make if you were using a 0.2mm nozzle. I will be printing 25mm to 30mm figures for Roleplaying games so I need to get as fine a print as I can muster.
Difficult in Cura because adjusting the nozzle size from 0.4 is tricky.
You probably already figured it out, but it's so easy to do.
@@truantray What?
hehe Rich forgot to Shave :-)) can you set it for the wanhao D9 and send me the file over Facebook Richard ?
I haven't forgot I'm just not shaving...
he is like me he is not growing a beard he is just not shaving the beard is a by product.
There once was a man with a gerbil, whose printing was downright terr'ble.
He asked me to twerk.
I called him a jerk.
He said, "The jerk, you will want to enerble!"
I bought a 3d printer and I gotta say. It's not fucking fun