Please make videos of h'ness , changing chain and sprocket or lubing wheel bearings or changing fork oil of front suspension. please share some knowledgeable videos to us.
Sir you're probably the most knowledgeable person i know regarding fixing and maintenance of highness, do you have instagram or WhatsApp or anything where i can contact regarding a question? Its about the allignment of wheel bearing/wheel hub of hness with pictures as reference. Looking forward to your reply ☺️
Hey hi , I own a highness cb350 and i want to do the general maintenance on my own... Where do u get your OEM parts from in kolkata? Could u please specify. Your videos are really informative. Thanks.
@DipayanBose brother, thanks for the reply. Had a lot of sleepless nights thinking about the noise. Yes, the tappets are at factory spec. ( checked it twice). I still hear sound from engine when revving. Here is the link to the video sample. Please do let me know what sould I check for ua-cam.com/video/d65KjVUKp10/v-deo.htmlsi=UoFE7AkFOdZSfPfF
Light is very good. You can go for it. I removed it because I like the stock headlight looks in the bike more. Light output is definitely better in the Vaishnu LED projector.
You should definitely go for the Vaishnu light. They are great. I keep on changing things every now and then in my bike just like that. No reason actually.
If rain and rust is your concern, the more open it is the better it is. Since it would get air to dry up fast or one could wipe it dry as well. There is a way to open up the top cap to replace it, but that is not recommended.
Oh sorry. I thought you were talking about the rear one, the front one could easily be done. Talk to your bigwing dealer and they would do it for you once the parts arrive.
Hi bro, I need your expertise. I hear a "tak tak" engine noise when revving. Is it safe to adjust timing chain? Since i already done adjusting tappet & valve clearance
Since you have already adjusted the tappets, assuming that they are at factory spec, you could consider replacing the tensioner. However before doing so, please have it checked by a good mechanic.
@@DipayanBose brother, thanks for the reply. Had a lot of sleepless nights thinking about the noise. Yes, the tappets are at factory spec. ( checked it twice). I still hear sound from engine when revving. Here is the link to the video sample. Please do let me know what sould I check for ua-cam.com/video/d65KjVUKp10/v-deo.htmlsi=UoFE7AkFOdZSfPfF
The stock suspension setup on this bike is stiff. However please do have the coneset checked and tightened ( most likely the coneset of your bike needs adjustment or regressing). Doing this smoothens out the ride quantity considerably. Regarding the suspension itself, I would be pouring in a low weight oil soon to check if it helps. Will definitely share through a content. Thanks.
My shock absorber got very weak I'm using it on last setting still I don't feel confident it's only been a year and half... what can be done any suggestions?
Check your swing-arm bearings and or bushes. Have it greased or if worn out then you may need to replace them. Poor condition swing-arm pivots leads to lack of confidence from the bike. Regarding suspension being in the last setting ( assuming the hardest one) it varies from rider to rider and different terrains. Show it to a good mechanic, take his advice whether to replace them or not. Never go for repairing rear suspension.
Since the wheel size is 19 and 18 inch, not many options are available. I will be doing some R & D on this one. As of now, the stock MRF ones suits the bike best.
Those who have no idea about such DIYs, I would suggest use of WD40 extensively in rainy season and don't go for pressure washing unless and until there is mud/heavy dirt.
O brother, PLEASE dont wait for the RPM Project. Too much complicated in this bike. However since I have the metre, I am always trying out possibilities. Lets see. Thanks anyway for your love and support Brother
@@DipayanBose i have been using Tach/Hour meter on CB350RS, it costed 1800/-. It's a standalone system, stays on always and detects pulse coming in Spark Plug wire, it has its own battery and as per manufacturer should last for 3 years without needing a change. I'm hoping to disassemble that meter and use electronics inside to make a new RPM meter that is drawing power from the vehicle and also study the electronics inside to see if i can repair it if needed in future , will update if it's a successful project. P.S : Thanks for this maintenance tip.
@@DipayanBoseOh! Best wishes in the hope of a successful project on the RPM installation. 👍🏻 Out of curiosity, could you specify which RPM meter you are going along with for the project?.
@DipayanBose brother, thanks for the reply. Had a lot of sleepless nights thinking about the noise. Yes, the tappets are at factory spec. ( checked it twice). I still hear sound from engine when revving. Here is the link to the video sample. Please do let me know what sould I check for ua-cam.com/video/d65KjVUKp10/v-deo.htmlsi=UoFE7AkFOdZSfPfF
Despite following lot of maintenance videos, this is something I have never seen anybody do or talk about. Cheers for the good one!
Please make videos of h'ness , changing chain and sprocket or lubing wheel bearings or changing fork oil of front suspension. please share some knowledgeable videos to us.
Ok
Sir you're probably the most knowledgeable person i know regarding fixing and maintenance of highness, do you have instagram or WhatsApp or anything where i can contact regarding a question? Its about the allignment of wheel bearing/wheel hub of hness with pictures as reference. Looking forward to your reply ☺️
Share your no. At dipayan_bose@hotmail.com
Will call you.
Hey hi , I own a highness cb350 and i want to do the general maintenance on my own... Where do u get your OEM parts from in kolkata? Could u please specify.
Your videos are really informative.
Thanks.
@DipayanBose brother, thanks for the reply. Had a lot of sleepless nights thinking about the noise. Yes, the tappets are at factory spec. ( checked it twice). I still hear sound from engine when revving.
Here is the link to the video sample. Please do let me know what sould I check for
ua-cam.com/video/d65KjVUKp10/v-deo.htmlsi=UoFE7AkFOdZSfPfF
Bro how did u remove the helmet lock which is present on the left side of rear mudguard
The helmet lock is with the stock grab rail. I have installed the Zana top rack after removing the stock grab rail. Hence no helmet lock.
Hi brother, have you removed the Vaishnu led headlight ?? was there any issues with its quality ??? kindly pls update bcos thinking of buying them
Light is very good. You can go for it. I removed it because I like the stock headlight looks in the bike more. Light output is definitely better in the Vaishnu LED projector.
@@DipayanBose thanks for ur reply brother, it was so useful 👍
Show us the suspension adjustment as well ❤️🩹
Please tell me honda cb350 handlebar diameter in clamp area 22 orn28 mm?
Sir which engine oil should I go for my highness?
Hii
Hope you are good, could you please share me buying link for the tool that we need to open a front tyre of Highness..
It’s a 17mm Allen
Why did you remove the Vaishu Headlight? I was planning to get one because the stock light is very bad for night rides.
You should definitely go for the Vaishnu light. They are great. I keep on changing things every now and then in my bike just like that. No reason actually.
Hi Dipayan Bose can we change the suspension chrome cap with new cb350's cap because it's long for rainy days
If rain and rust is your concern, the more open it is the better it is. Since it would get air to dry up fast or one could wipe it dry as well. There is a way to open up the top cap to replace it, but that is not recommended.
Oh sorry. I thought you were talking about the rear one, the front one could easily be done. Talk to your bigwing dealer and they would do it for you once the parts arrive.
Royal Enfield classic 350 bs3 ka Shock absorber highness pe fit hoga kya ?
I think RE classic shocks are shorter than Hness. Otherwise bush modify karne se ho jana chahie.
try intercepter's..those are of same size
Hi bro, how are you? It's been a long time since I have seen any video from u. Is everything fine with you?
Thanks for your concern Brother. Is all good. Just too much caught up with work. Will be back soon.
Hi bro, I need your expertise. I hear a "tak tak" engine noise when revving. Is it safe to adjust timing chain? Since i already done adjusting tappet & valve clearance
Since you have already adjusted the tappets, assuming that they are at factory spec, you could consider replacing the tensioner. However before doing so, please have it checked by a good mechanic.
@@DipayanBose brother, thanks for the reply. Had a lot of sleepless nights thinking about the noise. Yes, the tappets are at factory spec. ( checked it twice). I still hear sound from engine when revving.
Here is the link to the video sample. Please do let me know what sould I check for
ua-cam.com/video/d65KjVUKp10/v-deo.htmlsi=UoFE7AkFOdZSfPfF
@@blackyjacky96 definitely timing chain issue. Needs replacement.
My CB350 is 15 month old. I found my bike is so hard on speadbreakers and potholes. Any issue with the suspension are they working ok.🤔
The stock suspension setup on this bike is stiff. However please do have the coneset checked and tightened ( most likely the coneset of your bike needs adjustment or regressing). Doing this smoothens out the ride quantity considerably.
Regarding the suspension itself, I would be pouring in a low weight oil soon to check if it helps. Will definitely share through a content. Thanks.
@@DipayanBose thanks for your quick reply, 👍
Did you put lower weight oil and check ? New CB350 suspension are stiff
My shock absorber got very weak I'm using it on last setting still I don't feel confident it's only been a year and half... what can be done any suggestions?
Check your swing-arm bearings and or bushes. Have it greased or if worn out then you may need to replace them. Poor condition swing-arm pivots leads to lack of confidence from the bike. Regarding suspension being in the last setting ( assuming the hardest one) it varies from rider to rider and different terrains. Show it to a good mechanic, take his advice whether to replace them or not. Never go for repairing rear suspension.
@@DipayanBose Thanks for the suggestion I'll do that....
Hey Dipayan bro, I'm looking for some new set of tyres for Hness
Can you recommend some?
Since the wheel size is 19 and 18 inch, not many options are available. I will be doing some R & D on this one. As of now, the stock MRF ones suits the bike best.
Those who have no idea about such DIYs, I would suggest use of WD40 extensively in rainy season and don't go for pressure washing unless and until there is mud/heavy dirt.
Hey Dipayan, thank you for your time and effort in creating great content for DIY enthusiasts.. 👌🏻
Eagerly awaiting an update on the RPM project..☺️
O brother, PLEASE dont wait for the RPM Project. Too much complicated in this bike. However since I have the metre, I am always trying out possibilities. Lets see. Thanks anyway for your love and support Brother
@@DipayanBose i have been using Tach/Hour meter on CB350RS, it costed 1800/-. It's a standalone system, stays on always and detects pulse coming in Spark Plug wire, it has its own battery and as per manufacturer should last for 3 years without needing a change. I'm hoping to disassemble that meter and use electronics inside to make a new RPM meter that is drawing power from the vehicle and also study the electronics inside to see if i can repair it if needed in future , will update if it's a successful project.
P.S : Thanks for this maintenance tip.
@@themotoguide7191 thats really great ya. Do update.
@@DipayanBoseOh! Best wishes in the hope of a successful project on the RPM installation. 👍🏻
Out of curiosity, could you specify which RPM meter you are going along with for the project?.
MMB Tacho meter can be installed very Easley, you can try that.
Any rust near the head pipe
@DipayanBose brother, thanks for the reply. Had a lot of sleepless nights thinking about the noise. Yes, the tappets are at factory spec. ( checked it twice). I still hear sound from engine when revving.
Here is the link to the video sample. Please do let me know what sould I check for
ua-cam.com/video/d65KjVUKp10/v-deo.htmlsi=UoFE7AkFOdZSfPfF