Always like to watch those engines come out so gently and steady. Couldn’t help but notice the white stuff out in the yard though! Another thumbs up Andy!
Hi Andy ! Good job everyone , even the young man keep looking Jerret to learning how to do it .beautiful school your shop. Thanks for your time and have a good day everyone at the farm ! 🙋♂️
It makes sense to save the good ones since you would have to buy a complete set if you just needed to replace a couple. Nice work, Andy! Thanks for keeping us "in the loop." lol
I was wondering why can't you hard surface the old flight bars and then use them later,but you probably already thought of that........Thanks Andy for a great video as always!!!!
It's awesome to see you guys using the hell out of that crane. They are a real game changer aren't they? Sorry to see that engine coming out but it happens, been down that road with the longevity of parts the last few years. Maybe all these guys on here that are 8.1 L experts can chime in on exactly what happened and educate me lol.....
@@FarmingFixingFabricatingit's a Deere engine that's all that needs to said. 😂😂 Fyi this is a joke. I had 3, 8.1 liters in 7010/20 series loved them for power torque and durability. One had 15,000 hours on it in one of 7810s when it got demolished in a collision with a semi truck and only ever had injectors and intake valves put in it. And I only changed the oil every 700 hours. Cleaned the air filter everyday though
Just about Everytime I see that darn semi or trailer in the shop. I bet if that semi or trailer could speak it would say ( I'm too old for this again) 😊😅😂❤
Andy, I noticed you was using a solvent gun to do some touchup black spray paint on your combine. In the past, I have used one for painting like side of the building or a roof. They work pretty good Fast to clean too. Be careful catch you later
Andy, could I ask you a personal question? When you had that procedure on your legs, were they took the small veins out of your legs? Did that help you with pain and if it did what was that called if you don’t care to comment? Thank you I think I got a similar problem.
Do you know of the trick to make a pipe adapter to screw in where the grease fitting goes and pump in hyd. fluid with the port-a-power to break the pin loose and take grease again
Andy, when they updated the power did they give you 3 phase or did you already have it? If 3 phase Is new, what about generators or a 3 phase generator for the new parlor if that’s run off 3 phase?
Always like to watch those engines come out so gently and steady. Couldn’t help but notice the white stuff out in the yard though! Another thumbs up Andy!
Nice work Andy thankyou for sharing your knowledge. Have a great day.
Hi Andy !
Good job everyone , even the young man keep looking Jerret to learning how to do it .beautiful school your shop.
Thanks for your time and have a good day everyone at the farm ! 🙋♂️
That's one way to change the oil in a tractor. LOL - Always love your sense of humor Andy!
Awesome video thanks Andy for your time and consideration top job top team 🚜🚜🚜🚜🚜
It makes sense to save the good ones since you would have to buy a complete set if you just needed to replace a couple.
Nice work, Andy! Thanks for keeping us "in the loop." lol
Great video...that service truck has been an awesome addition to the operation. It sure makes things safer and efficient. Y'all stay warm up that way.
Thank you for another great informative video. Thank you to you and your entire crew and family for making theses video's possible
Good video, thanks Andy 👍
Jared has a few winter projects lined up. Good luck with them, Jared.
I was wondering why can't you hard surface the old flight bars and then use them later,but you probably already thought of that........Thanks Andy for a great video as always!!!!
You'll never be without a service truck with a crain again! I still have mine.
A lot of work to do from now till April, your crew does good work
Thank you for another Great video. Cheers
Love this time of the year. All the maintenance work that you do is remarkable.
Where can we buy FFF hats
Farmingfixingandfabricating.com
That service truck getting a workout. With both heads ready to go next year a second chopper for Sarah what a team just kidding 👍🚜
Na let Andy continue running chopper, let sarah run the combine!
Sarah will never be chopper operator if they ever do go two choppers that's gonna be Andrew Junior.
It's awesome to see you guys using the hell out of that crane. They are a real game changer aren't they? Sorry to see that engine coming out but it happens, been down that road with the longevity of parts the last few years. Maybe all these guys on here that are 8.1 L experts can chime in on exactly what happened and educate me lol.....
For sure we’ll see what the peanut gallery comes up with
Hello, Adam! 👍
@@FarmingFixingFabricatingit's a Deere engine that's all that needs to said. 😂😂 Fyi this is a joke.
I had 3, 8.1 liters in 7010/20 series loved them for power torque and durability. One had 15,000 hours on it in one of 7810s when it got demolished in a collision with a semi truck and only ever had injectors and intake valves put in it. And I only changed the oil every 700 hours. Cleaned the air filter everyday though
Just about Everytime I see that darn semi or trailer in the shop. I bet if that semi or trailer could speak it would say ( I'm too old for this again) 😊😅😂❤
Great video Andy
Good luck working on the vac truck guys
Another good job Andy 👏
Nice work as usual. Lots of projects ….
What did you use to spray the chains on the head? What liquid and the tool? Thanks for another great video Andy!!!
Rusfre undercoating gun and it was used engine oil
Hi Andy, hopefully you are doing well?
👍🏻❣️🇺🇸
You need a proper OTC diesel engine stand. Expensive but pays for itself after a few uses.
May I ask what is the tool called that was an air hose pulling product out of 5 gal bucket?
Siphon blow gun, as the air goes passed the tee it creates a vacuum and sucks up the fluid and sprays it out in a mist.
Is that the 8320 that had an engine rebuild no long ago andy??🤔
Yeah
Andy, I noticed you was using a solvent gun to do some touchup black spray paint on your combine. In the past, I have used one for painting like side of the building or a roof. They work pretty good Fast to clean too.
Be careful catch you later
Rusfre undercoating gun
Andy, could I ask you a personal question? When you had that procedure on your legs, were they took the small veins out of your legs? Did that help you with pain and if it did what was that called if you don’t care to comment? Thank you I think I got a similar problem.
Andy, Jared is a Andy Jr 25 years ago.
I love how you guys can tear them down fix them faster than Deere you better just open up a fix and repair shop Andy !!!!!
Are you wishing? You would have got a service truck like that. A while ago, it seems to come in pretty handy
"Nothing to See here" - there is no sense watching
Do you know of the trick to make a pipe adapter to screw in where the grease fitting goes and pump in hyd. fluid with the port-a-power to break the pin loose and take grease again
Oh yeah…. Have you ever toe the threads out???
@FarmingFixingFabricating no wev been pretty lucky there
Na, there's always something to do !😊
Andy, when they updated the power did they give you 3 phase or did you already have it? If 3 phase Is new, what about generators or a 3 phase generator for the new parlor if that’s run off 3 phase?
We have 3 phase
Always great content Andy
Which tractor is getting the engine pulled? If you said in the video I missed it.
8320
@FarmingFixingFabricating thank you.
Andy do you Heat the Shop with used Oil or No Heat?
Used oil, he did a video maybe a year or two ago about it
Used motor oil
Curious question sir your old, head will you paint the old head,?
No,I like the patina look
Do you ever attempt to straighten the pickup head teeth?
I have in the past…. They usually break anyway
Tires on left side looks like there in the flat stage , was it on purpose?
Barometric pressure on that side of the shop is greater
Good luck fixing the tractor motor Jared
Good luck fixing the semi Jared
Will all loyal F F n F viewers be receiving a free hoodie for XMas??
HVAD EN NY SNITTER, END NYT SNITTERBOR???
Close the door your letting the fly's in.
Only if they have thermal underwear on! 😂
Which tractor did they take the engine out of?
8320
been waiting on a new video........:)
Let santa do the repair
New cap and also new jacket, you got the early christmas present Andy, right!
What happened to the tractor engine?
Oil pump. As stated in the video. 😊
Let tbe kids work lol 😂😂
👍
Do you have a student to work with Jared to learn TO REBUILD AN ENGINE.
Not sure what you are asking
@FarmingFixingFabricating if you have someone to teach how to rebuild an engine. That's why I asked if you had someone willing to learn from Jared.
So many things getting worked on at once.
🇨🇦👍
Hi
What was the outcome of the girls going to the doctor?
Bit personal that
What was the outcome the last time you went to the Dr? I really don't want to know, but how do you feel about a stranger asking that? 🙄
Us Ladies have to go to doctor on a regular basis, unlike males.
Are you for real it's none of your business.
Love this time of the year. All the maintenance work that you do is remarkable.
Where can we buy FFF hats
👍