full credit for determination.. and most impressive fan silencing skills on that battery charger.. thanks for the entertainment and education from some of the interesting bits..
Another car-related method I've heard of is putting them under a car jack while you jack up a car, and I bet with a bit of work you could even make a jig that would apply pressure to opposite edges at the same time! Nice job getting it off anyhow, where there's a will there's a way!
Really like this vid Rinoa. 1. I have played with chrome paint too and sprayed it over gray aswell. does not give much chrome qualities and does look frosted.. I figure out if you spray it over black paint it works great! 2. I have the same socket wrench. love how small the gearing is for the ratcheting. Keep it up ill always keep watching
Field Expedient tire service. Your neighbors think you may be a Tweeker at this point, but well done just the same. I got to do this myself next month so I'm studying for the test. Thanks.
To make a perfect Honda logo on that cover you could use the same process used to make homemade circuit boards. That's the idea: print the logo in red using a toner printer in photographic paper. Put the paper over the cover and heat it using a iron (not a soldering iron, but the ones used to flatten clothes). Then the logo will peel off the paper and stick to the cover, after that you can use some gaze coating to make it shine
The method i suggested will more like work for everyone that have access to a toner printer, and its crazy cheap xD Anyway, the one you did is good enough, for me at least... What about eletrifying that beast?
The method I use to unseat the bead is stand on the tire and work it down all around so it's all lower than the bead. Then still while standing on either side of the rim I start hitting close to the bead with a long solid steel rod that weighs about 30 lbs. I suppose. I'm sure it helps that I go north of two bills and sometimes it takes a half hour but I always get them to let loose. That front one might have been a tough nut to crack with my method though. Anyway, the key is not to let the bead work against you by trying to pull down one spot (thereby increasing resistance everywhere else) but I guess with the help of a car's weight it'll give!
That electrosis is a good idea, but here is a tip you should get a trough from a farm so that you have more room to do more items at a time so you are saving time
nice job on the rims man, looks as good as if they were brand new off ebay :-) perhaps you could run a few psu's in parallel for the electrolysis that way you could tap them for the extra ampage and retain the same voltage :-) it was cool to see those tyres didn't have inner tubes in them and you just glued them up. Makes sense when I think about it I guess considering they are designed to give a bit, to increase traction. Theres nothing like the peace and silence of the night to work in, no phones going at it, just focus and let the show begin :-) Looking forward to seeing the carb :-D
i have to say the structure of your videos is very well done. its like a trailer or a sneak peak for the rest of the video. so i loled entirely to hard at 24:05
How late do you work on projects ? Here in the UK it gets dark around 21:30 right now, I'm guessing you're not much different so it has to be pretty late.
I saw somewhere that instead of using salt you can use baking soda, maybe that would be a bit less corrosive to your sacrificial metal, if you even care lol
Well done, you have made them as good as new :-)) The trike does look much better now, every bit you do is making you a smashing machine to ride later :-) Those rims looked like crap before you started, if i didnt know better i would say you replaced them, the effect is so good :-). Yes chain it up, ive had a motorbike stolen and its not a nice feeling :-(
i wonder if these youtube videos could be used as evidence of my ownership in the event of it being stolen, but then found? unfortunatly the title was lost in the 80s so its not like we have actual paperwork for it.
Rinoa Super-Genius In the uk if you have the engine and frame number you can apply to the dvlc for a registration document, it will tell you the last owner and other basic stuff, if its not stolen then they issue you a license plate number. All steps can take dam ages, the new or old licence plate number stays with the bike/car/van/lorry..... no matter who owns it. Cant you apply to your department with the engine/frame number and colour + make of vehicle??
zx8401ztv yeah well i'd hate for somebody else to happen to have the licence and it go back to them. ya know like whoever sold it in the 80s kept the licence.
Rinoa Super-Genius I would investigate how to get a new licence number and ownership, you want it to be yours!!. Even the registration document we have is just a notified keeper, its not a rock solid "its mine" guarantee., we are a bit odd that way lol.
zx8401ztv well i don't really need it to ride it. like we don't have licence plates for ATVs here. i just don't know if it'll be worth the hastle. it'll be staying in my dad's basement locked up in a while so it's only a temporary worry that it will be stolen.
great stuff Rinoa the tyres look awesome and great paint job of the hubs. On another note, there is all ways some part of the vid that all ways makes me laugh on this its where you say I don't trust my neighbours and snarl especially those fuckers over there and point in the direction. That all ways the way no matter how nice a area you live there is all ways one awkward neighbour to get on with
I laughed when you said the fuckers over there, because I have a neighbor that just got out of prison and I don't truct that fucker either,,,good thing he has an ankle bracelet on keeps him in check a little bit.
Oh man, those tires were always a bitch thanks to the rim design. I've done a handful of them for my ATC200S, and I've never been able to break the beads, so I've always had to cut the tire off the rim. Ah, you had the two piece rims. Mine are single piece and much more difficult to get apart. I've spent hours on them before. never able to break a bead and save the tire. It's unfortunate because one of the tires I've got right now needs an inner tube, and I doubt I can dismount it without completely ruining the tire. Now that I work in an auto shop I may try the machines there.
yeah but i will be doing those after i get it to atleast drive around a bit. wheels, carb, and pull starter are a primary need and then removing rust and building a gas tank and seat are secondary.
In whole of the EU you would spent 5 years + in jail for the way you are working and prolly 100 K € - 1 Mio.€ for disposing that "electrolysis" waste on your lawn in a housing area, just saying. Be very glad you live in the USA.
Wow these wheels and rims look sick dude the awesome next you maybe clean up the engine and frame get the rust of and why do you not trust your neighbors did they do something
Next time you run into a really stubborn tire that does not wan't to come loose from a rim, and if it is a scrap tire and you are going to electrolise the rims, use one of your tools that you highlited in one of your other videos. HINT: you filled it up with coleman stove fuel and I told you that I was amazed that it still functions. But you may want to cut most of the tire off first so that you don't fill the neighborhood up with black smoke, unless ofcoarse the wind is blowing towards those " Fucking neighbors".
Have you had some bad experiences with your neighbors? I was actually thinking about what your neighbors were like before you said you didn't trust them XD
well lets see, they are dumb shits. back in the 80s when they had a kid the guy beat him every day and the wife spent all their money and her time drinking at the bar. now their son is like 30 and freeloads over there sometimes and will just walk into my back yard and i almost have to chase him away with a crowbar. the old guy is fat and rude and also cheep and shady. like he had me look through all my tires for a rear riding mower tire as if he wanted to buy one. i offered it to him for 15$ and he was acting cheap so i dropped it down to 10$ and he still acted like he wanted me to give it to him for free. they call the cops on our other neighbor's dogs yet they have a dog tied to a tree in the back yard that barks non-stop. whenever he weedeats his yard sometimes he kicks the fence so the neighbor's dogs get angry then he hits them with the weed wacker and all my neighbors start cussing at each other. they sit on their front porch for hours on end staring at anybody who goes by and if you drive even a lawnmower on the public street infront of their house he gets up and opens his front door enough for him to grab his telephone then stare at you. thats him threatening to call the cops. it's entirely legal to drive lawnmowers on the road but they are so selfish they think lawnmowers "disturb the peace" meanwhile he has 6 riding lawnmowers and for some reason him and his wife will come home with beer cans in the back of their truck, and they will procede to make as much noise as possible for an hour while they get like 100 cans out of his truck and stomp on them and shove them into a trash barrel about every day. if it was legal, i wouldnt have any reservations against going over there and burning their house to the ground with them inside. hope that helps you understand my neighbors a bit.
Cool stuff! I'd be interested if you tried dehydrating a scoop of that electrolysis sludge and see what you get. (Well, I assume rust, but it would be cool anyway. :P )
yeah that works most of the time, but sometimes they are just too stuck where even tire shops cant undo them, like in this video if i remember correctly.
Haha i only hope your neighbors dont watch this vid :-)
I wish you uploaded a video everyday, because I love watching them.
i do aim to. i have uploaded mostly every day but sometimes every other day since May.
I cant wait until the 3 wheeler is up and running,
WarpCore
I hope to get it fully complete before we go to st Joe state park in September.
full credit for determination.. and most impressive fan silencing skills on that battery charger.. thanks for the entertainment and education from some of the interesting bits..
I didn't remember ordering pancake tires... lmao
Great job! I am really enjoying this series of videos. I always look forward to the next one :)
Love your work Rinoa, most entertaining, useful and inspiring at the same time.
Wishing you well in your ongoing adventurous endeavors
Love the video...can't wait to hear it run again...good job!
Another car-related method I've heard of is putting them under a car jack while you jack up a car, and I bet with a bit of work you could even make a jig that would apply pressure to opposite edges at the same time! Nice job getting it off anyhow, where there's a will there's a way!
Really like this vid Rinoa.
1. I have played with chrome paint too and sprayed it over gray aswell. does not give much chrome qualities and does look frosted.. I figure out if you spray it over black paint it works great!
2. I have the same socket wrench. love how small the gearing is for the ratcheting.
Keep it up ill always keep watching
Damn those rims came out real nice! I hope you continue with this series, I enjoy watching it.
Field Expedient tire service. Your neighbors think you may be a Tweeker at this point, but well done just the same. I got to do this myself next month so I'm studying for the test. Thanks.
oh my neighbors know i hate drugs and alcohol, but thats because my neighbors are meth heads. so no, i look pretty good compared to them.
No worries. Thanks for the help. I never doubted you or I would not have mentioned it period. Peace.
great series of vids! can't wait to see the next ep!
thanks, ima take a bit of time away from this project and work on some other stuff for a week or so. this video alone took 5 days.
Excellent videos as usual...Laughed out loud about your neighbors.
ps.. if you dried out the scummy rust esidue could it be used to make thermite?
To make a perfect Honda logo on that cover you could use the same process used to make homemade circuit boards. That's the idea: print the logo in red using a toner printer in photographic paper. Put the paper over the cover and heat it using a iron (not a soldering iron, but the ones used to flatten clothes). Then the logo will peel off the paper and stick to the cover, after that you can use some gaze coating to make it shine
or i can go to my dad's company and use the same method they origenally used to coat it. either silk screen or sublimation
The method i suggested will more like work for everyone that have access to a toner printer, and its crazy cheap xD Anyway, the one you did is good enough, for me at least... What about eletrifying that beast?
Mateus Leonardo
yeah i was thinking about that but it would be better to worry about that when i find a nice motor.
The method I use to unseat the bead is stand on the tire and work it down all around so it's all lower than the bead. Then still while standing on either side of the rim I start hitting close to the bead with a long solid steel rod that weighs about 30 lbs. I suppose. I'm sure it helps that I go north of two bills and sometimes it takes a half hour but I always get them to let loose. That front one might have been a tough nut to crack with my method though. Anyway, the key is not to let the bead work against you by trying to pull down one spot (thereby increasing resistance everywhere else) but I guess with the help of a car's weight it'll give!
I just set mine on fire the heat wasnt enough to hurt the rim and it cleaned the grease and paint off for me as well
you probably still ruined the tempering of the rim. good luck not bending it
Awesome video ever 😍 continue to make more videos like this one
What size of tire did you use
Will the charger being hooked up to the same circuit as the solar panel damage the panel? (if its hooked up to the same electrodes as I think it is)
theres a diode inside the panel. and if not its just a shitty panel.
Then no worries!
nice job on the wheels... I knew ud be able to get them back on the rims no worries and set the bead. My hat goes off to you :)
well thank you ^^
+Rinoa Super-Genius when you going to make a video of you riding it ??
That electrosis is a good idea, but here is a tip you should get a trough from a farm so that you have more room to do more items at a time so you are saving time
came out good....
nice job on the rims man, looks as good as if they were brand new off ebay :-) perhaps you could run a few psu's in parallel for the electrolysis that way you could tap them for the extra ampage and retain the same voltage :-)
it was cool to see those tyres didn't have inner tubes in them and you just glued them up. Makes sense when I think about it I guess considering they are designed to give a bit, to increase traction.
Theres nothing like the peace and silence of the night to work in, no phones going at it, just focus and let the show begin :-)
Looking forward to seeing the carb :-D
They are some awesome looking tyres. Great work my friend. By the way email waiting for you.
thanks :D
THERE IS SOMETHING ABOUT THIS DUDE THAT MAKE ME WATCH ALL HIS PROCEDURES....HAHAHHAHA
i have to say the structure of your videos is very well done. its like a trailer or a sneak peak for the rest of the video. so i loled entirely to hard at 24:05
How late do you work on projects ? Here in the UK it gets dark around 21:30 right now, I'm guessing you're not much different so it has to be pretty late.
well i worked from 10AM to 1AM the first day then 1PM to 7AM the next.
Rinoa Super-Genius The results were worth the hard work, the rims look great. I enjoyed the video, thanks.
Just wondering, why did you paint the inside of the rims?
i dont want them rusting up, the old tires took almost an entire day to remove because the rust had encrusted around them on the inside.
Rinoa Super-Genius i was thinking that the gasket material might not stick as well.
the rims were originally painted on the inside if i remember right, and they dont really need to stick, thats what the air pressure is for
Rinoa Super-Genius i guess so.
I saw somewhere that instead of using salt you can use baking soda, maybe that would be a bit less corrosive to your sacrificial metal, if you even care lol
***** Yeah I might have got the two mixed up.
whats the name of that tune at the part where you put the wheels back on? cool video!
Final Fantasy VI: Devil's Lab Extended
i sped it up a bit because i think it being faster sounds nicer.
Rinoa Super-Genius thanx!
Well done, you have made them as good as new :-))
The trike does look much better now, every bit you do is making you a smashing machine to ride later :-)
Those rims looked like crap before you started, if i didnt know better i would say you replaced them, the effect is so good :-).
Yes chain it up, ive had a motorbike stolen and its not a nice feeling :-(
i wonder if these youtube videos could be used as evidence of my ownership in the event of it being stolen, but then found? unfortunatly the title was lost in the 80s so its not like we have actual paperwork for it.
Rinoa Super-Genius
In the uk if you have the engine and frame number you can apply to the dvlc for a registration document, it will tell you the last owner and other basic stuff, if its not stolen then they issue you a license plate number.
All steps can take dam ages, the new or old licence plate number stays with the bike/car/van/lorry..... no matter who owns it.
Cant you apply to your department with the engine/frame number and colour + make of vehicle??
zx8401ztv yeah well i'd hate for somebody else to happen to have the licence and it go back to them. ya know like whoever sold it in the 80s kept the licence.
Rinoa Super-Genius
I would investigate how to get a new licence number and ownership, you want it to be yours!!.
Even the registration document we have is just a notified keeper, its not a rock solid "its mine" guarantee., we are a bit odd that way lol.
zx8401ztv
well i don't really need it to ride it. like we don't have licence plates for ATVs here. i just don't know if it'll be worth the hastle. it'll be staying in my dad's basement locked up in a while so it's only a temporary worry that it will be stolen.
Way better than your e-trike :)
Ooo nice tires brand new like :)
thanks!
That sound was just the engine pushing out a stroke of compressed air, not the bearings :)
Lol using the car to get it off, that was classic!
I noticed a lack of fences in your neighborhood.
if we need a fence, then that means we have bad neighbors.
Maybe you should make sure the thing can even run before putting brand new tires on it..
+Limearito it ran some years ago, and if not i can upgrade to electric.
That tire was a bear, I think I would of cut most of the rubber off and then dealt with that inner part.
that would have been a bad idea because then you wouldnt have much extra rubber to grip onto.
great stuff Rinoa the tyres look awesome and great paint job of the hubs.
On another note, there is all ways some part of the vid that all ways makes me laugh on this its where you say I don't trust my neighbours and snarl especially those fuckers over there and point in the direction.
That all ways the way no matter how nice a area you live there is all ways one awkward neighbour to get on with
I had to cut all 3 of my old tires off 😂
I laughed when you said the fuckers over there, because I have a neighbor that just got out of prison and I don't truct that fucker either,,,good thing he has an ankle bracelet on keeps him in check a little bit.
Wish we had a Rural King where I live.
Looks like my 82 atc
All 3 tires for $55?
24:07- THANK YOU
for calling my neighbors "fuckers"?
Oh man, those tires were always a bitch thanks to the rim design. I've done a handful of them for my ATC200S, and I've never been able to break the beads, so I've always had to cut the tire off the rim.
Ah, you had the two piece rims. Mine are single piece and much more difficult to get apart. I've spent hours on them before. never able to break a bead and save the tire. It's unfortunate because one of the tires I've got right now needs an inner tube, and I doubt I can dismount it without completely ruining the tire. Now that I work in an auto shop I may try the machines there.
me too hahahahah
Paint the rims in color red.
Will u be redoing the whole engine and frame as well I love these 20 minute vids u keep em intresting
yeah but i will be doing those after i get it to atleast drive around a bit. wheels, carb, and pull starter are a primary need and then removing rust and building a gas tank and seat are secondary.
cant wait to see the finished thing keep us updated :) you are doing good on it
Make a video on your trusty neighbors! :-)
In whole of the EU you would spent 5 years + in jail for the way you are working and prolly 100 K € - 1 Mio.€ for disposing that "electrolysis" waste on your lawn in a housing area, just saying. Be very glad you live in the USA.
Wow these wheels and rims look sick dude the awesome next you maybe clean up the engine and frame get the rust of and why do you not trust your neighbors did they do something
And it probably took you a long time to do these vids 2
fungamer sr this video took 5 days. and my neighbors are very shady. they are just very suspicious.
Yeah but still it was a really good video
fungamer sr
well thanks. i wish it hadnt been 24min but oh well. sometimes a long video is inevitable.
Hey this is Elijah McGaugh i need some 8" three wheeler tires
oh man that was a train wreck but to be fair i do have a tire machine at he house but get a sand blaster save yourself alot of work
Next time you run into a really stubborn tire that does not wan't to come loose from a rim, and if it is a scrap tire and you are going to electrolise the rims, use one of your tools that you highlited in one of your other videos. HINT: you filled it up with coleman stove fuel and I told you that I was amazed that it still functions. But you may want to cut most of the tire off first so that you don't fill the neighborhood up with black smoke, unless ofcoarse the wind is blowing towards those " Fucking neighbors".
yeah i wanted to try that but didnt want to ruin the rim.
Rinoa Super-Genius Burning an automotive type steel wheel won't hurt it except for making it all rusty.
gorp27 well it could make the metal soft so i'd have to retemper it. not counting i'd hate to get a 2000$ fine for burning tires.
In vest in a sand plaster
Have you had some bad experiences with your neighbors?
I was actually thinking about what your neighbors were like before you said you didn't trust them XD
well lets see, they are dumb shits. back in the 80s when they had a kid the guy beat him every day and the wife spent all their money and her time drinking at the bar. now their son is like 30 and freeloads over there sometimes and will just walk into my back yard and i almost have to chase him away with a crowbar. the old guy is fat and rude and also cheep and shady. like he had me look through all my tires for a rear riding mower tire as if he wanted to buy one. i offered it to him for 15$ and he was acting cheap so i dropped it down to 10$ and he still acted like he wanted me to give it to him for free.
they call the cops on our other neighbor's dogs yet they have a dog tied to a tree in the back yard that barks non-stop. whenever he weedeats his yard sometimes he kicks the fence so the neighbor's dogs get angry then he hits them with the weed wacker and all my neighbors start cussing at each other.
they sit on their front porch for hours on end staring at anybody who goes by and if you drive even a lawnmower on the public street infront of their house he gets up and opens his front door enough for him to grab his telephone then stare at you. thats him threatening to call the cops. it's entirely legal to drive lawnmowers on the road but they are so selfish they think lawnmowers "disturb the peace" meanwhile he has 6 riding lawnmowers and for some reason him and his wife will come home with beer cans in the back of their truck, and they will procede to make as much noise as possible for an hour while they get like 100 cans out of his truck and stomp on them and shove them into a trash barrel about every day.
if it was legal, i wouldnt have any reservations against going over there and burning their house to the ground with them inside.
hope that helps you understand my neighbors a bit.
wow... that's.. intense... o-o
Rinoa Super-Genius id offer to help u build a fence but i live in NZ
Eric god
i'm just going to build my youtube channel up and move away haha.
good idea
Please stop wasting your time, a local sand blaster in the UK done my atc185 wheels for £10 each... No hastle at all and they came back like brand new
Cool stuff! I'd be interested if you tried dehydrating a scoop of that electrolysis sludge and see what you get. (Well, I assume rust, but it would be cool anyway. :P )
depends, the lower area of the tank has a dark blue powder but the upper has the rust colored powder.
2 piece rims just use pry bar .....takes no effort just did three the other day on an atc 110
doing what with them takes a pry bar?
use pry bar to loosen tire bead, took 3 tires off rims on my atc 110 maybe 20 minutes time...easy
yeah that works most of the time, but sometimes they are just too stuck where even tire shops cant undo them, like in this video if i remember correctly.
I see you use the same technique spraying off electrolysis goop as with spraying on paint. lol
not exactly no, but similar if you just simplify it down to just "use pressure to spray liquid onto object"
Sandblast....
what about it?
This is the guy from wkuk😂
Neighbors that bad?
scary chisel
what in the hell are you doing???
+MoJo is that a trick question?
Dude, you need new bearings
+Thomas Fry duh, lol
I'm going to say one thing and one thing only and I'm vary sorry but someone is not the sharpest tool in the shed
I might not be the sharpest tool in the shed, but you can still cut down a tree with a hammer. hahaha
1st comment
Great job! I am really enjoying this series of videos. I always look forward to the next one :)