I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...
If you want MultiTv channels only, you have to get a stable MultiTv signal. This means you need to change the dish position from DStv to MultiTv if you will not watch DStv again. If you wanna watch both, you'll need to buy another LNB for the Installation
Press Menu on your remote. Look For INSTALLATION on Installation page, look for either SATELLITE SETTINGS/ DISH SETTINGS/ ANTENNA SETTINGS. then look for TRANSPONDER or FREQUENCY AND SYMBOL RATE. add this figures 12525 V 30000 and save. After saving look for SCAN option and select BLIND SCAN. Press Ok to Scan. ❤️
Plz with my master combo decoder I got stable signal but after scanning they tell me that no new channel found and if I go back to the channel list it is no signal. Plz help me
I’m having a similar problem, and when I selected factory reset, it’s asking for a password, I have no idea who set the password nor what it is, help pls!
The default code is ( 0000 ) if it doesn't work use ( 1111 ) and ( 1234 ) . If all these codee doesn't work, call the last installer that worked on it. There might be a change of default code
@@mikeklitz6761 Go-to Menu: Installation Select ( DVB-T/T2) Change the scan mode to Auto Scan. Press OK to scan If you unable to get more channels Add this Frequency (482.0 MHz), 490.0, 498.0, 602.0 and perform Manuel scan. But make sure you're having a stable signal from the antenna.
@@pbtecknology signal strength is very low (24%)...i guess it's because of the rains. Will try again tomorrow. Thanks bruh. I pray I get them back tho..one more thing Ghana can't be found when selecting country. Hope does not the problem?
Goto menu Press Ok on Channels settings Look for (Edit command) and press on it Now look for the (MOVE) command and start arranging the channels. Press Ok or Exit depending on the decoder to save
I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...
Please can I get your what's app line
Please add the T2 settings as well
Very good man keep up
T2 means ....
Don't stop producing content. Your content really helped me..
I’m impressed ! Well done man 😊🤝...keep it up
You're highly welcome bro ❤️
Everything just worked for me
Thank you boss
You're highly welcome bro ❤️
Gud job bro...keep it up
I follow ur instructions... everything was perfect... Bravooooo
You're highly welcome
You have saved me 20ghc today, thanks
You're highly welcome ❤️
Hi how i change the code pin i Lost them
(0000) (1234) (1111) use the defaults code
Thanks for saving me you are good 👍
You're highly welcome ❤️
Can you use a normal antenna for the decoder?
Any Antenna in good condition can be used
It really worked,God bless you
You're highly welcome ❤️
How do I take the dollar sign 💲 on my quality decoder? To get 4syte tv and some others?
You'll need either a hacking software or BISS key to unlock
Thank you sir!😊
You're highly welcome ❤️
I already have a DStv dish installed. Can i use this? Or do i need to set the dish for multi tv
If you want MultiTv channels only, you have to get a stable MultiTv signal. This means you need to change the dish position from DStv to MultiTv if you will not watch DStv again. If you wanna watch both, you'll need to buy another LNB for the Installation
@@pbtecknology Thanks
You're highly welcome
I'm using q-box. How do I run the scan?
Press Menu on your remote.
Look For INSTALLATION
on Installation page, look for either SATELLITE SETTINGS/ DISH SETTINGS/ ANTENNA SETTINGS.
then look for TRANSPONDER or FREQUENCY AND SYMBOL RATE.
add this figures 12525 V 30000 and save.
After saving look for SCAN option and select BLIND SCAN. Press Ok to Scan. ❤️
Thanks. I'm trying it now
It worked like magic. Thanks bro. I've subscribed and liked. I'll tell others about you
You're highly welcome ❤️
Hey I tried but couldn't find the figures you said
Please how can add scramble channel have lost on the decoder
Plz with my master combo decoder I got stable signal but after scanning they tell me that no new channel found and if I go back to the channel list it is no signal. Plz help me
Reset the Decoder to factory default and scan it again
I’m having a similar problem, and when I selected factory reset, it’s asking for a password, I have no idea who set the password nor what it is, help pls!
The default code is ( 0000 ) if it doesn't work use ( 1111 ) and ( 1234 ) . If all these codee doesn't work, call the last installer that worked on it. There might be a change of default code
Please I just update my decoder firmware with wrong firmware and then it isn't working again
Which decoder type
What’s the value at the LNB frequency?
That's what receive the signal microwave from the satellites and send it down to the receiver.
Bro....i mistakenly deleted my digital channels(Tv Africa, Zylofone TV, Top TV and the likes), please how do I get them back
Which Decoder are you using?
@@pbtecknology master combo...thanks for replying tho
@@mikeklitz6761 Go-to Menu:
Installation
Select ( DVB-T/T2)
Change the scan mode to Auto Scan.
Press OK to scan
If you unable to get more channels
Add this Frequency (482.0 MHz), 490.0, 498.0, 602.0 and perform Manuel scan.
But make sure you're having a stable signal from the antenna.
@@pbtecknology signal strength is very low (24%)...i guess it's because of the rains. Will try again tomorrow. Thanks bruh. I pray I get them back tho..one more thing Ghana can't be found when selecting country. Hope does not the problem?
@@mikeklitz6761 select Togo
And put in (482.0) to get the signal, after that perform Auto Scan.
Please boss after following your instructions , I got no new channels what did I do wrong
There's no satellite signal, check the cable or get a professional installer to help you out
How do I switch to dvd with this decoder?
Hello. I can't find super settings under upgrade (menu) on my Master decoder. Hope u can kindly help out. Thanks
Super Settings? I can't get you right bro. Reframe your question
@@pbtecknology me to , in super settings i find a way to instal cccam lines
Good day sir
Pls can you help me out on how to carry out with PAUXIS PX-999 Fta decoder RF OUT setup. To other TV's.
Thanks.
Please can you help open all scramble channels on E16
Alright
hello I have the MASTER decoder please tell me how to have all the channels without subscription?
Which channels are you referring to. There are many free-to-air channels that doesn't need a subscription
it's nice what u r doing, but pls make it more visible with the TV so that we can also see it properly. kudos though. just do more vids ok
Alright bro
Please how do you reset your master combo plus if you run the software and it corrupt your decoder with only the power button working.
Pls I have done it many times but still it is not working
How do i add more than one satellite and scan. This is because i am not getting certain channels such as unity TV
You can do that by going to the satellite list page, mark the satellite names and proceed with blind Scan
How can I use USB to update master combo?
Download the right software on a USB drive and insert it, go to menu, software upgrade and click on that software.
Please tp 12640 is not working on my decoder
Check your satellite dish to get the signal
If it's showing invalid, change the satellite name
Wow so good men
Please how can I connect my phone wifi to the decorder
Not all Decoders have built-in Wi-Fi. The once without WiFi, you'll need an external wifi dongle to confirm
How do I get daystar tv and kicc tv
Daystar TV 12522 V 27500 68°E
KiCC tv 11200 V 27500 13° E
Please help me scan for digital channels on my master combo decorder
Hw can I arrange de channels in alphabetical order
Goto menu
Press Ok on Channels settings
Look for (Edit command) and press on it
Now look for the (MOVE) command and start arranging the channels.
Press Ok or Exit depending on the decoder to save
Pls want to no about the IPTV setup
Alright
Please l password the decoder but I forget help please😂
I changed the default code and forget it
Please how can I set a new password on the decoder
You'll need to change it with defaults code that's ( 0000 )
Keep it up bro
Thank you
You're highly welcome
Please how can I add One hd channel to my channels
where i can add cccam lines?
Please I want some of the decoder how much bro ??
It will depends on the retailer , prices ranging from Gh100 - Gh250
Very nice presentation but please when I scan for the channels I don't get One Hd tv... How do I go about it?
Most HD TV are paid to view channels
Please how about the network setting
You really no the tp code for multi - tv
MultiTv TP ( 12525 V 30000 )
Mine is not working 😭😭😭💔
Where are you finding it difficult
My decoder has order country channel
Check the dish position
(Master decoder original S1000 HD PLUS ) fix no signal
Il.faut penser à nous les francophones 😰😰😰
pls hlp me set mine
After your video, you gave your whatsapp number. The number was not clear to me. Please state it in a response to this message. Thanks.
+233596059733
How do u connect it to wifi
You will need a compatible USB Wi-Fi connector, not all Wi-Fi devices are compatible with this Decoder.
I am with Lyad-Deen Fuseini, how to connect it to WiFi ? I am in the Philippines 🇵🇭
No new channel found
wow
Master no manu lock
meaning.....
Pls the tp own
Please I want install Islamic channels can u assist me
Poor video... The screen is not clear.. what you doing is not visible
Alright bro
Check your UA-cam video quality
Alright bro ❤️