Good news, this works as expected now without the need of the exp d/r workaround as 2nd function. Just got my pro and began setting it up. Can't wait to use it. Thank you for your awesome content regarding this radio!
I’m confused do you have to use the throttle dr and idle up I thought the pro was like “low 45, mid 75, high, 100 and it would auto ramp like that do you have to use the line lock? Or will it just ramp itself to low mid then high? And that’s why you use line lock so you can start at low ? Idk if I explained that right
I just added the lock as ppl where asking if you could hold the throttle on 100% then just hit a button and it goes through the range you have set that all,
Hoping you can help.. I got my nb4 set up on my 2-speed crawler. I got the shift setup on a switch on the nb4, but i want it to only shift when its on some throttle, so the cogs engage smoothly. So no shifting when there is no trottle, as the cogs can be alligned badly. Do you know if this is possible on the nb4? If it is, it would probably make for a interesting video for crawler users too.
how do i set the noble pro to launch at 15/20% & then run out my 8 second delay without having to push any buttons? this is for speed runs ~ once the car is lined up & at a dead stop ~ all i want to do is pull full trigger & get a instant 15/20% & then my set delay follows...i hope this makes since & you understand what im asking
The delay would be set same as the delay for a drag RC but I don't think there is a way to just have the throttle start at 20% without pressing any other button? Maybe the dead zone on the throttle but not sure how for you can increase that
@@WTFRCCars ok what if i set only 2 stages & have my first stage with no delay for the first 20% & the second stage with a 8 second delay ~ do you think that will work? I will not have the transmitter til this Friday so i cant test it out til then.
Right got ya 👍 yeh will be doing some running vids when I get chance just needed the weather to dry up and somewhere to run it, I got a lot to do with that drag RC ;)
Has anyone had an issue with multistage the ramp time? If I have the radio running one stage for 1.75 seconds, when I hit the throttle, the ramp runs for 1.75 seconds. But if I have multiple stages like L:1.0sec M:0.5sec and H:0.25 sec and I hit the throttle, the ramp runs for something like 0.95 seconds. I've experimented with a number of time settings but I haven't found a consistent pattern.
I don't think most people have any of the stages set higher than 0.2 of a second as most drag runs are over in less than 2 seconds but I haven't had anyone mention anything so far about it.
Good news, this works as expected now without the need of the exp d/r workaround as 2nd function. Just got my pro and began setting it up. Can't wait to use it. Thank you for your awesome content regarding this radio!
I’m confused do you have to use the throttle dr and idle up I thought the pro was like “low 45, mid 75, high, 100 and it would auto ramp like that do you have to use the line lock? Or will it just ramp itself to low mid then high? And that’s why you use line lock so you can start at low ? Idk if I explained that right
I just added the lock as ppl where asking if you could hold the throttle on 100% then just hit a button and it goes through the range you have set that all,
Hoping you can help..
I got my nb4 set up on my 2-speed crawler.
I got the shift setup on a switch on the nb4, but i want it to only shift when its on some throttle, so the cogs engage smoothly.
So no shifting when there is no trottle, as the cogs can be alligned badly.
Do you know if this is possible on the nb4?
If it is, it would probably make for a interesting video for crawler users too.
Not sure but I'll definitely look to see if I can do it :)
@@WTFRCCars thanks, thats awesome..!
Your knowledge of the nb4 far exceeds mine at this point
how do i set the noble pro to launch at 15/20% & then run out my 8 second delay without having to push any buttons? this is for speed runs ~ once the car is lined up & at a dead stop ~ all i want to do is pull full trigger & get a instant 15/20% & then my set delay follows...i hope this makes since & you understand what im asking
The delay would be set same as the delay for a drag RC but I don't think there is a way to just have the throttle start at 20% without pressing any other button? Maybe the dead zone on the throttle but not sure how for you can increase that
@@WTFRCCars ok what if i set only 2 stages & have my first stage with no delay for the first 20% & the second stage with a 8 second delay ~ do you think that will work? I will not have the transmitter til this Friday so i cant test it out til then.
Yeh think that would work just not sure I got what you where after in the 1st question but definitely worth a try :)
Is the automatic shift points only on the nb4 pro? Is the software for shit points the same on the nb4 vs the nb4 pro?
The pro has 3 shift points the nb4 only has 1 but I have done vids on both for drag setups :)
What about the plus
No nb4 and nb4+ are the same but the pro + now has multiple points you can set up
Nice video but can do a video showing the steps you just did
Not sure what you mean all the steps are in this video?
@@WTFRCCars the set up’s you did in the transmitter I want to see how your rc car works with the set up’s
Right got ya 👍 yeh will be doing some running vids when I get chance just needed the weather to dry up and somewhere to run it, I got a lot to do with that drag RC ;)
Has anyone had an issue with multistage the ramp time? If I have the radio running one stage for 1.75 seconds, when I hit the throttle, the ramp runs for 1.75 seconds. But if I have multiple stages like L:1.0sec M:0.5sec and H:0.25 sec and I hit the throttle, the ramp runs for something like 0.95 seconds. I've experimented with a number of time settings but I haven't found a consistent pattern.
I don't think most people have any of the stages set higher than 0.2 of a second as most drag runs are over in less than 2 seconds but I haven't had anyone mention anything so far about it.
Its a little advanced for me
will this only work on the Pro version?
Set up this way yes but I have a vid showing how to set up the nb4 too
why would you launch at 40 % that's gonna have you spinning all over the place & running off the course?
I wouldn't?